Fw: Troubles with Sony PCG-C1MHP (crusoe based and ALIM 1533 drivers)

From: Manuel Serrano (Manuel.Serrano@sophia.inria.fr)
Date: Mon Nov 18 2002 - 07:45:16 EST


Hello there,

I have tried the new version of the 2.4-ac brand of Linux kernel on my
Sony Vaio PictureBook (equipped with a crusoe processor). That is, I
have tried 2.4.20-rc1-ac4. This version compiles but at boot time I
have a kernel panic. Here is a trace of the error (I apologize for the
typo, I have typed-in what was displayed on the screen).

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----
ALI15x3: simplex device: DMA forced
ide1: bm-dma at 0x1400-0x140f, BIOS settings: hdc: DMA, hdd: DMA
blk: queue c029d6a0, I/O limit 4095MB (mask 0xffff..ff)
unable to handle kernel NULL pointer dereference at vistual address 00000010
printing eip:
c0107cab
*pde = 000000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0107cab>] no tainted
EFLAGS: 00010002
eax: 00000000 ebx: 00001fe0 ecx: 000000001 edx: 000000ff
esi: 00000212 edi: c029da4v ebp: 0000000ff esp: c1a13f64
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c1a30000)
stack: 0000000ff 0000000001 ....
call Trace: [<c019ee85>] [<c019fa98>] [<c0105021>] [<c01054a9>]

code: 8b 40 10 ff d0 83 c4 04 56 9d 83 3d 84 dc 27 c0 00 75 0f 89
<0>kernel panic: Attempted to kill init!
-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----

I hope this mail will help. Many thanks for your help and for your work.

Very sincerely,

-- 
Manuel

ps: Just for the information, I included here a previous mail I have sent, describing the problem I have with the main distribution of the kernel.

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----

[1.] One line summary of the problem: =====================================

The DMA support cannot be enabled for the harddisk

[2.] Full description of the problem/report: ============================================

As far as I have understood, this computer uses an ALi M1533 chip for controling the disk (even though, I must admit that I'm totally confused between the reference "ALi M1533 PCI to ISA Bridge" and the reference "ALi M5229 IDE"). If I compile the kernel (version 2.4.18, 2.4.19, 2.4.20-pre10, and 2.4.20-rc1) enabling the M15x3 support, I always have the same problem: the machine does not boot. I can't send the actual error message because the machine hangs without logging any message. However, I got something that ends with a message such as:

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|----- ALI15X3: chipset revision 196 ALI15X3: IDE controller on PCI bus 00 dev 80 ALI15X3: not 100% native mode: will probe irqs later -----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----

Nothing more. At this point, the keyboard is ineffective. The only solution is to switch off the computer.

On the web site: http://hale.org/~bhoward/issue_7/pcg-c1mrx.html, Bruce Howard reports a bug in the alim15x3.c kernel. I have tried to apply his patch but this does not help. He also mention to boot the kernel with the flags "ide2=0x180,0x386 pci=conf2". I don't think I understand the meaning of these flags but what I'm sure about is that they don't help.

In conclusion, the only way I have to boot the machine is using the generic IDE controler that works fine excepts that it does not support DMA for the disk. In consequence, I have very poor disk performance.

Many thanks, in advance, for your help.

[3.] Keywords (i.e., modules, networking, kernel): ==================================================

Sony Picture book, Crusoe, IDE, ALIM 1533.c, DMA.

[4.] Kernel version (from /proc/version): =========================================

owens:.../src/linux-2.4.20-rc1> cat /proc/version Linux version 2.4.20-rc1 (root@owens) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Mon Nov 4 09:47:32 CET 2002

[5.] Output of Oops.. message (if applicable) with symbolic information: ========================================================================

NA

[6.] A small shell script or example program which triggers the problem: ========================================================================

NA

[7.] Environment ================

Sony Picturebook PCG-C1MHP, Crusoe TM5800, ide disk IC25N030ATCS04-0 ATA/ATAPI IDE : IDE PCI Bus Master ALi M5229

[7.1.] Software (add the output of the ver_linux script here): ==============================================================

owens:.../src/linux-2.4.20-rc1> sh scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux owens 2.4.20-rc1 #2 Mon Nov 4 09:47:32 CET 2002 i686 Transmeta(tm) Crusoe(tm) Processor TM5800 GenuineTMx86 GNU/Linux Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11u mount 2.11u modutils 2.4.19 e2fsprogs 1.30-WIP pcmcia-cs 3.2.1 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 3.0.0 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 4.5.2 Modules Loaded sonypi trident ac97_codec soundcore ds yenta_socket pcmcia_core 8139too mii ospm_thermal ospm_battery ospm_ac_adapter ospm_busmgr usb-storage mousedev hid usb-ohci usbcore scsi_mod

[7.2.] Processor information (from /proc/cpuinfo): ==================================================

owens:.../src/linux-2.4.20-rc1> cat /proc/cpuinfo processor : 0 vendor_id : GenuineTMx86 cpu family : 6 model : 4 model name : Transmeta(tm) Crusoe(tm) Processor TM5800 stepping : 3 cpu MHz : 860.140 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr cx8 sep cmov mmx longrun lrti bogomips : 1703.93

[7.3.] Module information (from /proc/modules): ===============================================

owens:.../src/linux-2.4.20-rc1> cat /proc/modules sonypi 7240 0 trident 25556 1 (autoclean) ac97_codec 9640 0 (autoclean) [trident] soundcore 3364 3 (autoclean) [trident] ds 6120 1 yenta_socket 8512 1 pcmcia_core 31840 0 [ds yenta_socket] 8139too 13448 1 (autoclean) mii 2176 0 (autoclean) [8139too] ospm_thermal 5360 0 (unused) ospm_battery 5364 0 (unused) ospm_ac_adapter 1908 0 (unused) ospm_busmgr 10932 0 [ospm_thermal ospm_battery ospm_ac_adapter] usb-storage 20696 0 (unused) mousedev 3672 1 hid 17124 0 (unused) usb-ohci 17032 0 (unused) usbcore 53504 0 [usb-storage hid usb-ohci] scsi_mod 88584 1 [usb-storage]

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem): ===========================================================================

owens:.../src/linux-2.4.20-rc1> cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-017f : Acer Laboratories Inc. [ALi] M5229 IDE 01f0-01ff : Acer Laboratories Inc. [ALi] M5229 IDE 01f0-01f7 : ide0 0376-0376 : Acer Laboratories Inc. [ALi] M5229 IDE 03c0-03df : vga+ 03f6-03f6 : Acer Laboratories Inc. [ALi] M5229 IDE 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 1080-109f : Sony Programable I/O Device 1400-140f : Acer Laboratories Inc. [ALi] M5229 IDE 1800-18ff : Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device 1800-18ff : ALi Audio Accelerator 1c00-1cff : Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller 2000-20ff : PCI device 10cf:2011 (Citicorp TTI) 2400-24ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ 2400-24ff : 8139too 2800-28ff : ATI Technologies Inc Radeon Mobility M6 LY 4000-40ff : PCI CardBus #01 4400-44ff : PCI CardBus #01 8000-803f : Acer Laboratories Inc. [ALi] M7101 PMU 8040-805f : Acer Laboratories Inc. [ALi] M7101 PMU

owens:.../src/linux-2.4.20-rc1> cat /proc/iomem 00000000-0009afff : System RAM 0009b000-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000dc000-000dffff : reserved 000e0000-000e0fff : Acer Laboratories Inc. [ALi] USB 1.1 Controller (#2) 000e0000-000e0fff : usb-ohci 000f0000-000fffff : System ROM 00100000-0eeeffff : System RAM 00100000-001ecfb5 : Kernel code 001ecfb6-002570bf : Kernel data 0eef0000-0eefbfff : ACPI Tables 0eefc000-0eefffff : ACPI Non-volatile Storage 0ef00000-0effffff : System RAM 10000000-10000fff : Ricoh Co Ltd RL5c475 10400000-107fffff : PCI CardBus #01 10800000-10bfffff : PCI CardBus #01 e8000000-e80fffff : Transmeta Corporation LongRun Northbridge e8100000-e8100fff : Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device e8101000-e8101fff : Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller e8102000-e81027ff : Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) e8102800-e81028ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ e8102800-e81028ff : 8139too e8103000-e8103fff : Acer Laboratories Inc. [ALi] USB 1.1 Controller e8103000-e8103fff : usb-ohci e8104000-e8107fff : Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) e8110000-e811ffff : ATI Technologies Inc Radeon Mobility M6 LY e8200000-e82fffff : PCI device 10cf:2011 (Citicorp TTI) f0000000-f7ffffff : ATI Technologies Inc Radeon Mobility M6 LY fff80000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root) =============================================

owens:.../src/linux-2.4.20-rc1> sudo lspci -vv 00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 02) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=1M]

00:00.1 RAM memory: Transmeta Corporation SDRAM controller Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:06.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller Audio Device (rev 02) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ Latency: 64 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at e8100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [a0] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 Modem: Acer Laboratories Inc. [ALi] M5457 AC-Link Modem Interface Controller (prog-if 00 [Generic]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8101000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1c00 [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22 1394a-2000 Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8102000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e8104000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Multimedia controller: Citicorp TTI: Unknown device 2011 Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 2000 [disabled] [size=256] Region 1: Memory at e8200000 (32-bit, non-prefetchable) [disabled] [size=1M] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 2400 [size=256] Region 1: Memory at e8102800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 2800 [size=256] Region 2: Memory at e8110000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8103000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4) (prog-if a0) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 0 Region 0: [virtual] I/O ports at 01f0 [size=16] Region 1: [virtual] I/O ports at 03f4 Region 2: [virtual] I/O ports at 0170 [size=16] Region 3: [virtual] I/O ports at 0374 Region 4: I/O ports at 1400 [size=16] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Non-VGA unclassified device: Acer Laboratories Inc. [ALi] M7101 PMU Subsystem: Sony Corporation: Unknown device 80ec Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:12.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001

00:14.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 000e0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[7.6.] SCSI information (from /proc/scsi/scsi): ===============================================

owens:.../src/linux-2.4.20-rc1> cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: Sony Model: MSC-U03 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:23 EST