[PATCH] kmsgdump for 2.5.47

From: Justin A (ja6447@albany.edu)
Date: Sat Nov 16 2002 - 17:56:51 EST


This is kmsgdump for 2.5.47, most of it was just putting rejects back in that
had been too far offset for patch.

The Kconfig stuff should be good too, I wasn't sure about what to put for the
defaults, but I think its ok.

The only thing I had to change was that proccess.c didn't know about kb_wait
and no_idt from reboot.c, and I couldn't figure out what to add to reboot.h
for them so I just did:

+static long no_idt[2];
+static inline void kb_wait(void)
+{
+ int i;
+
+ for (i=0; i<0x10000; i++)
+ if ((inb_p(0x64) & 0x02) == 0)
+ break;
+}

in proccess.c. I'm sure someone else knows the correct way to fix that :)

I don't know if it should have worked by just sticking it in 2.5, It doesn't
appear to hook into anything other than panic.c. I guess if it worked for
you in 2.4, it should also work in 2.5...All I know is that it worked for
me(tm) and should be useful to someone else :)

-- 
-Justin

diff -urN -X dontdiff linux-2.5.47/arch/i386/Kconfig linux-2.5.47-kmd/arch/i386/Kconfig --- linux-2.5.47/arch/i386/Kconfig 2002-11-10 22:28:05.000000000 -0500 +++ linux-2.5.47-kmd/arch/i386/Kconfig 2002-11-16 17:29:19.000000000 -0500 @@ -1627,6 +1627,94 @@ depends on X86_LOCAL_APIC default y +config KMSGDUMP + bool "Kernel messages dumper" + depends on EXPERIMENTAL + default n + help + If you say Y here, you will get maximal chances to save your kernel + messages under weird conditions : you'll be able to display them on + the screen, print them on a parallel printer, and dump them onto a + floppy diskette. You will have to press SysRQ + D to access this + feature, or wait for a kernel panic. In the last case, it is also + possible to ask the kernel not to wait for any human operation, and + automatically dump its messages onto a diskette (see the option + CONFIG_KMSGDUMP_AUTO below). + + Warning: when using this feature, the CPU is rebooted in real mode + and the kernel won't recover. If messages are dumped onto a floppy, + this floppy will be erased, unless you enable the option + CONFIG_KMSGDUMP_SAFE below. More info can be found in the file + Documentation/kmsgdump.txt. + + All options below are used for default behaviour, but can be set + by writing to /proc/sys/kernel/kmsgdump if CONFIG_SYSCTL is enabled. + + Don't say Y unless you really want to hack your kernel and/or help + developpers to debug it. This isn't a toy, you have been warned ! + +config KMSGDUMP_FAT + bool "floppy as FAT by default" + depends on KMSGDUMP + help + By default, when CONFIG_KMSGDUMP is enabled, all messages dumped on + a floppy are in raw format, beginning at the first sector of the + diskette. By enabling this option, you'll change the default format + to FAT12. Although this is selectable under interactive mode, this is + not the case after a kernel panic, where this option applies most. + + When FAT is selected, the messages are saved into a file named + MESSAGES.TXT. This practice is discouraged if you share your computer + with anyone else, since other people may believe that if FAT is + supported, the contents of the diskette would not be lost, which is + false. It's better if people remember that the diskette is unusable + after a dump. On the other hand, accessing the file after a crash is + easier when the diskette is formated as FAT. One other advantage of + FAT is that the boot sector of the diskette is filled with a boot + redirector which makes the system boot from the first hard disk even + if the bios tried to boot from the floppy. If unsure, say Y. + + + + +config KMSGDUMP_AUTO + bool "Automatic dump then reboot on kernel panic" + depends on KMSGDUMP + help + When the kernel panics, it normally hangs or reboots. With + CONFIG_KMSGDUMP enabled, it will either enter the interactive mode + you can see by pressing SysRQ + D (default), or, if you say Y here, + automatically dump its messages buffer onto a diskette and then + reboot. + + Enabling this is dangerous because if a diskette is left in the + floppy drive, it may be destroyed (unless you enable the option + CONFIG_KMSGDUMP_SAFE below), but in case of a server, this might + be interesting since this one will automatically reboot after a + panic. Don't say Y here if this kernel is to be installed on a + floppy ! You would say Y in case of a server, N in case of a + workstation. + +config KMSGDUMP_SAFE + bool "Limit dump to pre-initialized floppies only" + depends on KMSGDUMP + help + When CONFIG_KMSGDUMP_AUTO is enabled, the kernel can automatically + dump its messages onto the floppy present in the drive during a + crash. This can be dangerous because if a floppy has been forgotten + in the drive it may be overwritten. By enabling this option, the + kernel will accept to write to the floppy only if it finds the word + "KMSGDUMP" at offset 3 on the floppy. + + So to prepare a disk to accept dumps, you just have to do this : + + echo "012KMSGDUMP" > /dev/fd0 + + Please note that in case of interactive mode dump, this check is + never made because we consider that the user knows what stands on + his diskettes. If unsure, just say "Y". + + endmenu source "security/Kconfig" @@ -1649,3 +1737,4 @@ bool default y + diff -urN -X dontdiff linux-2.5.47/arch/i386/kernel/kmsgdump.S linux-2.5.47-kmd/arch/i386/kernel/kmsgdump.S --- linux-2.5.47/arch/i386/kernel/kmsgdump.S 1969-12-31 19:00:00.000000000 -0500 +++ linux-2.5.47-kmd/arch/i386/kernel/kmsgdump.S 2002-11-16 15:38:32.000000000 -0500 @@ -0,0 +1,897 @@ +/* + * file : kmsgdump.S + * version : 0.4.3/2000122301 + * author : Willy Tarreau <willy AT meta-x.org> + * + * This code is called from the Bios when the processor has been + * externally reset and the NVRAM has been set to tell the bios + * to quickly branch to the pointer at [0x40:0x67]. + * It executes in real mode, and starts from 0:0x700. + * + * Its purpose is to dump the last kernel messages onto a floppy disk + * or to print them on a parallel printer. + * + * Useful information are stored at the following hexadecimal adresses : + * 0:0700 - 0FAF = this code followed by the stack + * 0:0FB0 - 0FEF = bios stack frame at reboot time + * 0:0FF0 ( 8 bits ) = destination drive number (bios number) + * 0:0FF1 ( 8 bits ) = track number (<256 !) + * 0:0FF2, bit 7 = caller mode (0=panic, 1=SysRq) + * bit 6 = output format (0=RAW, 1=FAT) + * bits 5->3 = behaviour when called from panic() : + * 000 = no dump, just halt + * 001 = no dump, just reboot + * 010 = dump, then halt + * 011 = dump, then reboot + * 100 = go to manual operation, just like SysRq. + * others undefined, so don't use please. Thanks. + * 0:0FF3 (13 bytes) = not used yet + * + * 0:1000 - 4FFF = kernel messages buffer contents (16 kB). + * + * Warning: This code is 16-bits, while the rest of the kernel is 32-bits. + * I couldn't find a way to link this file together with 32-bits + * files, just because of relative references which caused + * relocation issues. As a last resort, every variable is referenced + * "variable-base+CODEORIGIN" which is absolute and links well :-/ + * If someone finds a better way to do this, I'd like to learn from + * him. + */ +#include <linux/version.h> +#include <asm/kmsgdump.h> + +#define _pause jmp .+2 +.text +.code16 + +.global kmsgdump +.global kmsgdump_end + +/* + * I use this only for development, it's a bios bootstrap. + * You only have to define UNDER_DEVEL and the binary object + * can be copied to a raw diskette and will boot from it. + * Moreover, the code contains the KMSGDUMP identifier so that + * the diskette is useable as-is. + */ +#ifdef UNDER_DEVEL +bootstrap: + jmp 0f + .byte 0x90 + .ascii "KMSGDUMP" +0: + cli + xorw %ax, %ax + movw %ax, %ss + movw $0x7C00 , %sp + pushw %ss + popw %es + movw %cs, %ax + movw %ax, %ds + movw $1000,%cx + movw $(kmsgdump-bootstrap+0x7c00), %si + movw $CODEORIGIN, %di + cld + rep + movsb +/* movw $MASK_SYSRQMODE, MODEFLAGS*/ + movw $(MASK_PANICDUMP|MASK_PANICBOOT|MASK_OUTPUTFAT|MASK_SAFEDUMP), MODEFLAGS + +# read remaining sectors + + movw $0x0203, %ax + movw $(bootstrap-kmsgdump+CODEORIGIN+0x200), %bx + movw $0x0002, %cx + movw $0x0000, %dx + int $0x13 + +# pre-read messages + mov $0x220, %ax /* ah=2 (read), al=32 (32 sectors) */ + mov $(BEGINOFMESSAGES), %bx + mov $0x0005, %cx + mov $0, %dx /* head always begins with 0 */ + int $0x13 + + ljmp $0, $CODEORIGIN +#endif /* UNDER_DEVEL */ + +kmsgdump: + cli + xorw %ax, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + movw $(TOPOFSTACK), %sp + call hardware_reset + sti + testb $(MASK_SYSRQMODE | MASK_PANICMAN), MODEFLAGS + jz automatic + +/* Here is the manual mode loop (either SysRq or Panic with MANUAL flag set). + * Each second, a short beep is sent so that the user knows the computer + * is waiting for him/her to press a key. + * When 'B' is hit, the system immediately reboots. When 'H' is hit, the + * system halts, and when another key is hit, the system attempts a dump + * and beeps two more times in case of success. It then goes on waiting + * for a key in case the user wants another dump. + */ +manual_dump: +/* reinitialize display to color_80x25 */ + movw $0xe, %ax /* force a switch to graph mode to help in reinitialization */ + int $0x10 + movw $VIDEOMODE, %ax + int $0x10 +/* hide the cursor */ + movb $1, %ah + movw $0xFFFF,%cx + int $0x10 +/* redraw the screen */ + xorw %cx, %cx + call clearwindow +/* display title */ + movw $MKWORD(0,22), %dx + movw $(title-kmsgdump+CODEORIGIN), %si + call displayline +/* display separation and help line */ + movw $MKWORD(HELPLINE, 0), %dx + call movecursor + movw $MKWORD(0x0A, 177), %ax /* write a line of hashes */ + movb $0, %bh + movw $(RIGHTCOL+1), %cx /* a full line */ + int $0x10 + movw $MKWORD(HELPLINE, 12), %dx /* display help at column 12 */ + movw $(helpline-kmsgdump+CODEORIGIN), %si + call displayline + +# now we'll have to print the messages buffer in the lower window. +redrawmessages: + movw $MKWORD(HELPLINE+2,0), %cx /* first line of the messages window */ + pushw %cx /* save this, it will serve us later */ + call clearwindow + popw %dx /* restore top of window */ + mov $(BEGINOFMESSAGES), %si /* SI points to the beginning of the messages */ + xorw %di,%di /* first line */ + jmp findline +1: lodsb + or %al,%al /* end of data ? */ + jnz 3f + movw %di, currentline-kmsgdump+CODEORIGIN /* we fix the end at this point. */ + jmp waitevent /* and don't show anything */ +3: cmp $10, %al + jnz 1b /* while not LF, look for an end of line */ + inc %di /* count one more line */ +findline: + cmpw currentline-kmsgdump+CODEORIGIN, %di + jb 1b +showmessages: + cmpw $(LOG_BUF_LEN+BEGINOFMESSAGES), %si /* end of buffer reached */ + jnb waitevent + call displayline + cmp $BOTTOMLINE, %dh /* stop displaying when screen is full */ + ja waitevent + or %al,%al /* or when end of messages is reached */ + jnz showmessages +# redisplay current parameters after each pressed key +waitevent: + cmpb $0, mustredraw-kmsgdump+CODEORIGIN /* if we must redraw the messages window, let's do it */ + movb $0, mustredraw-kmsgdump+CODEORIGIN + jnz redrawmessages + +/* now, we'll display current settings (drive, format, status ...) */ + movw $MKWORD(2, 8), %dx /* row 2, col 8 */ + movw $(msgprinter-kmsgdump+CODEORIGIN), %si + call displayline + + movb DRIVENUM,%al + addb $'A', %al /* A and B if < 0x80 */ + test $0x80, %al + jz 1f + subb $(0x80-'C'+'A'), %al /* C and D if >= 0x80 */ +1: movb %al, unitname-kmsgdump+CODEORIGIN /* write the drive letter into the string */ + movw $MKWORD(2, 40), %dx /* row 2, col 40*/ + movw $(msgunit-kmsgdump+CODEORIGIN), %si + call displayline +/* SI is already positionned at msgFAT, so we avoid "movw $msgFAT,%si" */ + testb $(MASK_OUTPUTFAT), MODEFLAGS + jnz 2f + movw $(msgRAW-kmsgdump+CODEORIGIN), %si +2: call displayline + movw $MKWORD(3, 8), %dx /* row 3, col 8 */ + movw $(kversion-kmsgdump+CODEORIGIN), %si + call displayline + +1: movb $STATUS_WAITING, %al + call showstatus +8: call waitkey + jnz 1f /* a key has been hit */ + call beep /* no key hit: let's beep once a second */ + jmp waitevent /* loop while no key is pressed */ +1: cmpb $0x50, %ah /* down arrow */ + jnz 5f +7: incw currentline-kmsgdump+CODEORIGIN /* go one line below */ +1: movb $1, mustredraw-kmsgdump+CODEORIGIN + mov $1, %ah /* we check if another key has been hit to speed up scrolling */ + int $0x16 + jnz 8b /* handle this new key */ + jmp waitevent +5: cmpb $0x48, %ah /* up arrow */ + jnz 6f + subw $1,currentline-kmsgdump+CODEORIGIN /* one line back */ + jc 7b /* aie, negative line. Let's correct this */ + jmp 1b +6: cmpb $'b', %al /* 'B' stands for 'boot' */ + jz do_reboot + cmpb $'h', %al /* 'H' stands for 'halt' */ + jz do_halt + cmpb $'f', %al /* 'F' stands for 'change Format' */ + jnz 3f + xorw $(MASK_OUTPUTFAT), MODEFLAGS + jmp waitevent +3: cmpb $'u', %al /* 'U' stands for 'change Unit' */ + jnz 4f + xorb $1, DRIVENUM /* altern first/second drive */ + jmp waitevent +4: cmpb $'t', %al /* 'T' stands for 'prinTer' */ + jnz 5f + call probeprinter + jmp waitevent +5: cmpb $'i', %al /* 'T' stands for 'prinTer' */ + jnz 6f + movw $MKWORD(HELPLINE+2,0), %cx /* first line of the messages window */ + pushw %cx /* save this, it will serve us later */ + call clearwindow + popw %dx /* restore top of window */ + movw $(aboutmsg-kmsgdump+CODEORIGIN), %si +5: call displayline + or %al, %al + jnz 5b + jmp waitevent +6: cmpb $'p', %al /* 'P' stands for 'Print' */ + jnz 7f + call printbuffer + jmp 8f /* display same return codes as for diskette */ +7: cmpb $'d', %al /* 'D' stands for 'dump' */ + jnz waitevent + call do_dump +8: movb $STATUS_WERR, %al /* assume a dump error for now */ + jc 9f /* on error, we return immediately after ony one beep */ + movb $STATUS_DUMPOK, %al /* else we say that's good */ + call beep /* make 3 audible beeps once successfully dumped */ + call beep +9: call showstatus + call beep + movw $16,%cx /* wait 1 second after the message is displayed */ +0: call sleep54 + loop 0b + jmp waitevent + +/* clears the screen from the upper left corner defined by CX to the bottom right of the screen */ +clearwindow: + movw $MKWORD(BOTTOMLINE,RIGHTCOL), %dx /* bottom of screen */ + movw $0x0600, %ax /* clear the messages window */ + movb $ATTRIB, %bh + int $0x10 + ret + +/* probes the next printer, and if not found, the next one, ... until + we find one which is OK, or we fall back to the current one. +*/ +probeprinter: + movb $STATUS_PROBING, %al + call showstatus + movw $3, %cx /* we allow to automatically probe 3 printers */ +0: movb currentlpt-kmsgdump+CODEORIGIN, %al + incw %ax + cmpb $'3', %al + jbe 1f + mov $'1', %al +1: movb %al, currentlpt-kmsgdump+CODEORIGIN + subb $'1', %al + movzbw %al, %dx /* printer number */ + movb $1, %ah /* initialize printer */ + int $0x17 + testb $0x2F, %ah /* status = OK ? */ + loopnz 0b /* no, probe next printer */ +2: ret + +/* prints all the buffer on the current printer. On error, CF is set. */ +printbuffer: + mov $(BEGINOFMESSAGES), %si /* SI points to the beginning of the messages */ + movb $STATUS_PRINTING, %al + call showstatus + movb currentlpt-kmsgdump+CODEORIGIN, %al + subb $'1', %al + movzbw %al, %dx /* printer number */ +0: cmpw $(BEGINOFMESSAGES+LOG_BUF_LEN), %si + jae 9f /* end of buffer */ + lodsb + or %al, %al /* end of data */ + jz 9f + cmp $10, %al /* line feed : we'll insert a carriage return */ + jnz 1f + mov $MKWORD(0, 13), %ax /* print carriage return */ + int $0x17 + mov $10, %al /* line feed */ +1: movb $0, %ah /* print character */ + int $0x17 + testb $0x2F, %ah /* status = OK ? */ + jz 0b /* fetch next char */ + stc + ret +9: movw $MKWORD(0, 12), %ax /* form feed*/ + int $0x17 + clc + ret + +/* Automatic dump mode, without user operation. The function was called + * from panic(). Mode flags also allow an immediate reboot without a dump, + * which is the same than playing with "panic_timeout" in case of a kernel + * panic. + */ +automatic: + testb $(MASK_PANICDUMP), MODEFLAGS + jz 1f + testb $(MASK_SAFEDUMP), MODEFLAGS + jz 0f + /* a safe dump is requested. we must ensure the diskette contains a "KMSGDUMP" + label before scratching it. */ + xorw %ax,%ax /* reinitialize drive */ + movzbw DRIVENUM, %dx + int $0x13 + + movw $0x201, %ax /* read 1 sector */ + movw $(FREEMEMORY), %bx /* pointer to the buffer */ + movw $0x1, %cx /* from sector 1 */ + call int13retry + jc 1f /* read error, don't dump */ + cmpl $0x47534d4b, FREEMEMORY+3 /* "KMSG" */ + jnz 1f + cmpl $0x504d5544, FREEMEMORY+7 /* "DUMP" */ + jnz 1f +0: call do_dump +1: testb $(MASK_PANICBOOT), MODEFLAGS + jnz do_reboot + jmp do_halt + +/* beep(): + * Make a 54 ms beep, and silently pause during 54 ms + */ +beep: call sound_on + call sleep54 + call sound_off + call sleep54 + ret + +sleep54: + pushw %ax + movw CLOCKTICKS, %ax + incw %ax +0: cmpw CLOCKTICKS, %ax + jnb 0b + popw %ax + ret + +/* waitkey(): + * Wait at most 3 second for a key press. + * If no key is pressed during that time, 0 is returned in AX and ZF is set. + * If a key is pressed, its lower case ascii code is returned in AL, its scan + * code in AH and the ZF is cleared. + */ +waitkey: + pushw %cx + movw CLOCKTICKS, %cx + addw $55, %cx /* 55/18.2 = 3 seconds */ +0: movb $1, %ah /* function="tell if a key was pressed" */ + int $0x16 + jnz 1f + cmpw CLOCKTICKS, %cx + jnb 0b + xorw %ax,%ax /* timeout, no key */ + jmp 2f +1: movb $0, %ah + int $0x16 + cmpb $'A',%al + jb 2f + cmpb $'Z',%al + ja 2f + orb $0x20,%al +2: popw %cx + orw %ax,%ax /* ZF=(AX==0) */ + ret + + +/* hardware_reset(): + Reconfigure what can be wrong now in hardware : + - interrupt controller + - timers + - keyboard + - disk units +*/ +hardware_reset: +/* PIC reconfiguration consists in mapping PIC#1 IRQ 0 to software INT 8. + * Although not needed, PIC#2 is initialized in case we meet buggy chipsets. + */ + + movb $0x11, %al /* reconfiguration */ + out %al, $0x20 +# out %al, $0xA0 + _pause + movb $8, %al /* map irq 0 to int 0x08 */ + out %al, $0x21 +# movb $0x70, %al /* map irq 8 to int 0x70 */ +# out %al, $0xA1 + _pause + movb $4, %al /* master mode for PIC#1 */ + out %al, $0x21 +# movb $2, %al /* slave mode for PIC#2 */ +# out %al, $0xa1 + _pause + movb $1, %al /* 8086 mode */ + out %al, $0x21 +# out %al, $0xA1 + _pause + movb $0xFF, %al /* all IRQs are masked at the moment */ + out %al, $0x21 +# out %al, $0xA1 + _pause + +/* Disable internal speaker output if it was enabled */ + + call sound_off + +/* PIT reconfiguration : set Timer0 clock to 18.2 Hz */ + + movb $0x34, %al /* timer 0 in interrupt mode */ + out %al, $0x43 + _pause + movb $0, %al /* divide by 65536 (1193182 Hz -> 18.2 Hz) */ + out %al, $0x40 /* LSB first */ + _pause + out %al, $0x40 /* MSB next */ + _pause + +/* PIT reconfiguration (cont'd) : set Timer2 clock to 880 Hz for the buzzer */ + + movb $0xb6, %al /* timer 2 in square wave mode */ + out %al, $0x43 + _pause + movw $1355, %ax /* divider set to 1193182/1355 = 880 Hz */ + out %al, $0x42 /* LSB first */ + _pause + movb %ah, %al + out %al, $0x42 /* MSB next */ + _pause + + movb $0xBC, %al /* only irq 0,1,6 unmasked */ + out %al, $0x21 + _pause + +/* Keyboard reset: The keyboard may be misconfigured. We will send it a + reconfiguration (max speed) so that the Bios will at least reconfigure it + and its controller (i8042). +*/ + + mov $0x305, %ax /* set speed */ + xorw %bx, %bx /* full speed */ + int $0x16 + +/* Reset the minimum so that int 13 works */ + movw $0x3F2, %dx + movb $0x0, %al + outb %al, %dx + _pause + _pause + movb $0xC, %al + outb %al, %dx + _pause + _pause + + xorw %ax, %ax + xorw %dx, %dx + int $0x13 + ret + +/* sound_off(): disable internal speaker output. */ +sound_off: + push %ax + in $0x61, %al + andb $0xFC, %al + jmp 1f /* same code below */ + +/* sound_on(): enable internal speaker output. */ +sound_on: + push %ax + in $0x61, %al + orb $3, %al +1: _pause + out %al, $0x61 + pop %ax + ret + +/* HALT the CPU */ +do_halt: + movb $STATUS_HALTING, %al + call showstatus +0: cli + hlt + jmp 0b /* just in case of NMIs */ + + +/* REBOOT the CPU */ +do_reboot: + movb $STATUS_BOOTING, %al + call showstatus + cli +/* Make sure [40:72] doesn't contain 0x1234, which the Bios will interprete as + Ctrl-Alt-Del. */ + movw $0, 0x472 + ljmp $0xFFFF,$0 /* branch to bios boot strap */ + +/* + * do_dump(): + * This function dumps the message buffer onto a disk. CF is set if an error + * occured. + * + */ +do_dump: + movb DRIVENUM, %dl + xorw %ax, %ax + int $0x13 /* reinitialize drive */ + xorw %si, %si /* assume first data sector = 0 */ + testb $(MASK_OUTPUTFAT), MODEFLAGS + jz 1f + movw $(FATSIZE*2+2), %si /* when FAT is used, data go further */ +1: call makefat + jc 2f + call dumpdata +2: ret + +/* + * Shows, in the status line, the message matching the status code in AL. + * AX, BX, DX and FLAGS contents are lost. CX and SI are kept. + */ +showstatus: + cbw + pushw %si + pushw %cx + testb $(MASK_SYSRQMODE | MASK_PANICMAN), MODEFLAGS + jz 2f /* is not in interactive mode, don't show anything */ + pushw %ax + movw $MKWORD(3, 40), %dx + movw $(msgstatus-kmsgdump+CODEORIGIN), %si + call displayline + popw %si + cmpw $STATUS_MAXMSG, %si + ja 2f + shlw $4, %si + addw $(statwait-kmsgdump+CODEORIGIN), %si +1: call displayline +2: popw %cx + popw %si + ret +/* + * sets the cursor to the begin of the line in DH, col in DL, and displays the message from SI + * which ends with \n, \r or \0. On return, AL contains the byte that ended the line, and SI + * points to the next byte. + * if LF is encountered, the cursor is positionned at the beginning of the next line and + * LF is returned in AL, the cursor position in DX. + * If DH is set to -1, then the cursor isn't moved. The new cursor position is returned into + * DX so it's possible to recall displayline immediately. + */ +displayline: + cmpb $-1,%dh + jz 0f + call movecursor +0: cld +1: movb $ATTRIB, %bl /* use standard text attribute by default */ + lodsb + cmp $0377, %al /* a 0377 char means next one will be highlit */ + jnz 3f + movb $HIGHLIGHT, %bl + lodsb +3: cmp $13, %al /* CR is ignored */ + jz 1b + or %al, %al /* end of messages */ + jz 2f + cmp $10, %al /* LF: position onto next line and return from function */ + jnz 5f + pushw %ax + call findcursor /* DX gets the current cursor position */ + movb $255, %dl /* if we pass the end of the line, we'll begin on a new row */ + call movecursor + popw %ax /* restore LF in AX */ + jmp 2f /* and we return */ +5: movb $0, %bh /* current page = 0 */ + movw $1, %cx /* 1 char */ + movb $9, %ah /* write char with attribute */ + int $0x10 + call findcursor /* DX gets the current cursor position */ + inc %dx /* next position */ + call movecursor + jmp 1b +movecursor: + cmp $RIGHTCOL, %dl /* did we override the end of the line ? */ + jbe 1f /* no */ + inc %dh /* yes, so position onto the next line */ + movb $0, %dl +1: movb $2, %ah +4: movb $0, %bh + int $0x10 +2: ret +findcursor: + mov $3, %ah + jmp 4b + +#if defined(UNDER_DEVEL) & defined(DEBUG) +showhex: + pushfw + pushaw + movw %ax, %si + movw $4, %cx +0: pushw %cx + rolw $4, %si + movw %si, %ax + andb $0xF, %al + addb $'0', %al + cmpb $'9', %al + jbe 1f + addb $7, %al +1: movb $0xE, %ah + int $0x10 + popw %cx + loop 0b +#ifdef STEP_BY_STEP + movb $0, %ah + int $0x16 +#endif + popaw + popfw + ret +#endif + + +/* + * makefat(): + * writes a 18-sectors/track FAT on the diskette, at logical sector 0. + * CF is set if an error occurs. + * SI is preserved. + * + */ +makefat: + cld + pushw %si + movb $STATUS_FORMATING, %al + call showstatus +/* make DI point to the first free memory */ + movw $(FREEMEMORY), %di + pushw %di /* will be used later */ +/* initialize the data area : 1 boot, 1 fat, 1 root */ + movw $((FATSIZE+2)<<8), %cx + cld + xorw %ax, %ax + rep + stosw + popw %di + pushw %di +/* make boot sector */ + movw $(bootsect-kmsgdump+CODEORIGIN), %si + movw $(rootsect-bootsect), %cx + rep + movsb + +/* make fat1 (which is also fat2) */ + movw $(FREEMEMORY+0x200), %di + movw $2, %bx /* first usable cluster is always 2 */ + movw $(LOG_BUF_LEN >> 9), %cx /* #of sectors per FAT */ + + addw %bx, %cx /* decide now of the "end of chain" */ + incw %bx + movb $0xF0, %al /* FAT ID */ + stosb + movw $-1, %ax /* beginning of FAT */ + stosw +0: movw %bx, %ax + stosb + incw %bx /* next cluster */ + cmpw %cx, %bx /* did we reach the last cluster ? */ + jb 1f + movw $0xFFF, %bx /* yes: mark "end of chain" */ +1: shlb $4, %ah + movb $0, %al + orw %bx, %ax + rolw $4, %ax + stosw /* write 2 bytes at once */ + incw %bx /* next cluster */ + testb $0x10, %bh /* are we above the "end of chain" magic number ? */ + jz 0b /* not yet, let's go on for 2 more clusters */ + +/* make root sector */ + movw $(FREEMEMORY+0x200+FATSIZE<<9), %di + movw $(datasect-rootsect), %cx + rep + movsb + movw $(FIRSTCLUSTER), 14(%di) /* file begins at cluster 2 */ + movw $(LOG_BUF_LEN), 16(%di) /* file length in bytes */ + +/* in memory, we now have : + * BOOT | FAT | ROOT. + * We'll use a trick to write the two FATs : + * we first write (BOOT+FAT), and then append (FAT+ROOT) + */ + popw %di /* beginning of the area to write */ + movw $(1+FATSIZE), %cx /* one boot sector + N FAT sectors */ + xorw %si, %si /* write onto the first sector */ + pushw %cx /* fortunately, it will be the same size after... */ + call wrsect /* let's write the boot sector onto the disk */ + popw %cx /* 1+FATSIZE, let's save one byte of code */ + jc 0f +/* now write fat2 + root */ + movw $(FREEMEMORY+0x200), %di + call wrsect /* let's write the boot sector onto the disk */ +0: popw %si + ret + +/* + * dumpdata(): + * writes <LOG_BUF_LEN> bytes of data on drive DRIVENUM, from logical sector %si. + * CF is set if an error occured. + * + */ +dumpdata: + clc + pushw %si + movb $STATUS_DUMPING, %al + call showstatus + movw $(LOG_BUF_LEN >> 9), %cx /* #of sectors that will be written */ + movw $(BEGINOFMESSAGES), %di + call wrsect + popw %si + ret + +/* this function calls int 13 and if any error occurs, it will retry twice. + * all registers are kept except flags. + */ +int13retry: + pushaw + clc + int $0x13 + jnc 0f + popaw + pushaw + clc + int $0x13 +0: popaw + ret + +/* + * wrsect(): + * starts writing CX sectors of data from ES:DI to the diskette at logical sector SI. + * first logical sector is numbered 0. This function can write more than one track at + * a time, and is limited to the buffer's address in ES segment. + * all registers are modified, particularly : + * - SI which contains the first sector that should be written next time + * - DI which points to next data to be written + * - CX which tells how many sectors should be still written in case of CF=1 + */ +wrsect: +0: jcxz 9f /* when there are no more sectors to write, we return */ + pushw %cx /* save this number of remaining sectors to write */ + movw %si, %ax + + movw $(NBHEADS*NBSECT), %cx /* we'll compute the starting track number */ + divb %cl + xchgb %al, %ch /* al = 0, ch = track number */ + xchgb %ah, %al /* ah = 0, al = head*nbsect + sect */ + movb $(NBSECT), %cl + divb %cl + movb %al, %dh /* dh = head number */ + xchgb %cl, %ah /* ah = NBSECT, cl = sector number (0-based) */ + subb %cl, %ah /* ah = number of sectors before end of track */ + popw %bx /* number of sectors to write */ + movzbw %ah, %ax /* max #of sectors left on this track */ + cmpw %ax, %bx /* does it fit ? */ + ja 1f /* no, let's use AX */ + movw %bx, %ax /* take all the remainder */ +1: + subw %ax, %bx /* subtract these sectors from the rest */ + addw %ax, %si /* increment the start sector for the next round */ + pushw %bx /* save the actual number of sectors to be written */ + movb $3, %ah /* 3=write, AL is already set to #sectors */ + incb %cl /* CL was 0-based and needs to be 1-based */ + movw %di, %bx /* pointer to beginning of data */ + movb DRIVENUM, %dl + /* at this point, AL=#sectors, AH=3(write), BX=buffer addr, */ + /* CL=starting sector, CH=track, DL=drivenum, DH=head num */ + /* let's compute the next DI now */ + pushw %ax + shlw $9, %ax /* AL*512 = data size */ + addw %ax, %di + popw %ax + call int13retry + popw %cx /* restore the number of remaining sectors */ + jnc 0b /* if no error, let's continue */ +9: ret + +/* data needed to make a tiny FAT file system. */ +bootsect: + /* Warning : DOS expects first byte to be either EB or E9 (jump) ! */ + .byte 0xEB,(bootcode-bootsect-2),0x90 + .ascii "KMSGDUMP" + .hword 512 /* 512 bytes/sector */ + .byte 1 /* 1 sector/cluster */ + .hword 1 /* 1 reserved sector */ + .byte 2 /* 2 FATs */ + .hword 16 /* 16 root directory entries (1 root sector) */ + + .hword NBCLUSTERS /* total clusters */ + .byte 0xF0 /* media descriptor */ + .hword FATSIZE /* # of sectors per FAT */ + .hword NBSECT /* # of sectors/track */ + .hword NBHEADS /* # of heads */ + /* now some code to redirect the boot to the first hard disk. This way, + after an automatic dump, even if the diskette is left in the drive and + the bios doesn't automatically go to the hard disk, the diskette will + try to do it itself. + */ +bootcode: + /* first we'll copy the boot code elsewhere. */ + cli + cld + xorw %ax,%ax + movw %ax,%es + movw %ax,%ds + movw $0x7c00,%si /* current source */ + movw $0x8000,%di /* new destination */ + movw $256,%cx /* 256 words = this entire sector */ + pushw %si + repz + movsw + popw %bx /* current code will be erased */ + jmp .+3+0x8000-0x7c00 /* jump to fresh copy of this code */ + incw %cx /* cx=1 : read from sector 1 (cx was 0, so now it's 1).*/ + movw $0x80, %dx /* 0x80 = first hard drive */ + movw $0x201,%ax /* 2=read, 1=1 sector */ + int $0x13 + jnc bootsect-(0x8000-0x7c00) /* jump to new code if no error */ + int $0x19 /* or try to reboot */ + jmp . /* hang if int 19 returns. */ + +rootsect: .ascii "MESSAGESTXT" + .byte 0x20 /* archived file attribute */ +datasect: /* end of FAT-specific data */ + +mustredraw: .byte 0 +currentline: .hword 0 +title: .asciz "Linux Kernel Messages Dumper - v0.4.3" +helpline: .asciz "> \377Boot \377Dump \377Format \377Halt \377Info \377Print prin\377Ter \377Unit \377U\377p \377D\377o\377w\377n <" +/* it's important to respect the same order for the following parts. */ +msgprinter: .ascii "Printer : \377L\377P\377T\377" +currentlpt: .asciz "1" +msgunit: .ascii "Drive Unit and Format : \377" /* no zero string -> will display drive letter */ +unitname: .asciz "A/" +msgFAT: .asciz "\377F\377A\377T\3771\3772" +msgRAW: .asciz "\377R\377A\377W " +kversion: .ascii "Kernel version : " + .asciz UTS_RELEASE +msgstatus: .asciz "Status : " + +/* these messages must be *exactly* 15 chars long, and terminated by a 0 (ie: 16 bytes tot) */ +statwait: .asciz "Press a key " +statform: .asciz "Formating FAT12" +statdump: .asciz "Dumping msgs " +statdmpd: .asciz "Messages dumped" +statboot: .asciz "Rebooting... " +stathalt: .asciz "System halted. " +statprob: .asciz "Probing printer" +statprnt: .asciz "Printing msgs " +statwerr: .asciz "Dump failed ! " +aboutmsg: .ascii "KMSGDUMP 0.4.3 - (C) 2000/12/23 - Willy Tarreau <willy AT meta-x.org>\n" + .ascii "<\377B> reboots, <\377D> dumps messages onto the floppy, <\377F> changes floppy\n" + .ascii "format, <\377H> halts the system, <\377P> prints the messages on the selected\n" + .ascii "printer, <\377T> selects a printer, <\377U> changes the floppy unit, \377U\377p/\377D\377o\377w\377n arrows\n" + .ascii "scroll messages up/down, and <\377I> shows this help. When an action completes\n" + .ascii "successfully (print, dump), you should hear 3 short beeps.\n" + .ascii "When dumping data onto a floppy, be warned that FLOPPY CONTENTS WILL BE \377L\377O\377S\377T.\n" + .asciz "Hit <\377U\377p> key to list kernel messages again." +/* just a public label at the end of the code so we know its lenght. */ +kmsgdump_end: diff -urN -X dontdiff linux-2.5.47/arch/i386/kernel/Makefile linux-2.5.47-kmd/arch/i386/kernel/Makefile --- linux-2.5.47/arch/i386/kernel/Makefile 2002-11-10 22:28:05.000000000 -0500 +++ linux-2.5.47-kmd/arch/i386/kernel/Makefile 2002-11-16 15:51:48.000000000 -0500 @@ -28,6 +28,8 @@ obj-$(CONFIG_X86_NUMAQ) += numaq.o obj-$(CONFIG_PROFILING) += profile.o obj-$(CONFIG_EDD) += edd.o +obj-$(CONFIG_KMSGDUMP) += kmsgdump.o + EXTRA_AFLAGS := -traditional diff -urN -X dontdiff linux-2.5.47/arch/i386/kernel/process.c linux-2.5.47-kmd/arch/i386/kernel/process.c --- linux-2.5.47/arch/i386/kernel/process.c 2002-11-10 22:28:01.000000000 -0500 +++ linux-2.5.47-kmd/arch/i386/kernel/process.c 2002-11-16 16:33:47.000000000 -0500 @@ -48,6 +48,25 @@ #include <asm/math_emu.h> #endif +#if defined(CONFIG_KMSGDUMP) +static long no_idt[2]; +static inline void kb_wait(void) +{ + int i; + + for (i=0; i<0x10000; i++) + if ((inb_p(0x64) & 0x02) == 0) + break; +} + + +#include <asm/kmsgdump.h> +#ifdef CONFIG_X86_LOCAL_APIC +void disconnect_bsp_APIC(void); +void disable_local_APIC(void); +#endif +#endif + #include <linux/irq.h> #include <linux/err.h> @@ -375,6 +394,277 @@ dump->u_fpvalid = dump_fpu (regs, &dump->i387); } + +#ifdef CONFIG_KMSGDUMP +extern void dump_syslog(char * buf); + +/* checkpoint counter used to try to recover from recursive system crashes */ +static int chkpnt = 0; + +/* boot-time default flags. These are single character indicators except for T (track number) + and U (unit number) which must be followed by a number. To avoid confusion with default + values, each flag has its complement and you are strongly encouraged to use one of each. + + flags available are : + Name Description Default Complement + F FAT mode Yes R + R Raw mode F + A Automatic mode Yes I + I Interactive mode A + B Boot after dump Yes H only used in automatic mode + H Halt after dump B only used in automatic mode + S Safe mode Yes O only used in automatic mode + O Overwrite disk S only used in automatic mode + E Enable dumping Yes D only used in automatic mode + D Disable dumping E only used in automatic mode + Txxx Track xxx 0 (N/A) first track is 0 per default + Uxxx Unit xxx 0 (N/A) bios drive is 0 (A:) per default +*/ +char kmsgdump_flags[16]= +#ifdef CONFIG_KMSGDUMP_FAT + "F" /* Fat */ +#else + "R" /* Raw */ +#endif +#ifdef CONFIG_KMSGDUMP_AUTO + "AEB" /* Auto, Dump, Boot */ +#else + "IE" /* Interactive, Dump */ +#endif +#ifdef CONFIG_KMSGDUMP_SAFE + "S" +#else + "O" +#endif + "T0U0"; /* Safe,Track0,Unit0 */ + +/* + * machine_dump() : Added on 19990628 by Willy Tarreau <willy AT meta-x.org> + * + * This is used to dump the kernel messages buffer onto a floppy diskette. + * The system is rebooted to real mode so it will be unuseable after a call + * to this function which never returns. + * The argument to this function is the caller type (DUMP_FROM_PANIC=0 or + * DUMP_FROM_SYSRQ=1). + * + * Note 1 : Part of this code has been shamelessly stolen from machine_restart(). + * Perhaps it should be better to implement a generic rebooting function. + * Note 2 : I couldn't manage to get the <reboot_thru_bios> method to work + * here. The bios never calls my code. After hundreds of reboots, + * I finally accepted the fact that the PC is stronger than the human + * and only kept the reset method. But be careful, Linus' comment + * about it not working properly on some hardware still applies here. + * Note 3 : I don't know what means we have on other architectures to dump + * messages, but it will be interesting to add this feature to all archs. + */ + +void machine_dump(int callertype) +{ + int modeflags=MASK_OUTPUTFAT | MASK_PANICDUMP | MASK_PANICBOOT | MASK_SAFEDUMP; + int track=0; /* by default, track 0 */ + int unit=0; /* and drive A */ + + if (chkpnt<100) { + unsigned long l, r; + chkpnt=100; + cli(); + chkpnt++; +#if __SMP__ + /* + * Stop all CPUs and turn off local APICs and the IO-APIC, so + * other OSs see a clean IRQ state. + */ + smp_send_stop(); + disable_IO_APIC(); + chkpnt++; +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + /* if this CPU is using local APIC, we must disable it */ + if (test_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability)) { + disable_local_APIC(); + disconnect_bsp_APIC(); + rdmsr(MSR_IA32_APICBASE, l, r); + l &= ~MSR_IA32_APICBASE_ENABLE; + wrmsr(MSR_IA32_APICBASE, l, r); + } +#endif + } + /* Write 0x09 to CMOS register number 0x0f, which the BIOS POST + routine will recognize as telling it to : + - re-initialize a few parts of hardware ; + - load registers from a structure pointed to at [40:67] ; + - branch to the program at offset 0x14 in this structure. + + [Note: funciton 0x0A is easier to use, but doesn't re-initialize + anything and might not work on specific harware. ] + */ + + if (chkpnt<200) { + unsigned long flags; + chkpnt=200; + spin_lock_irqsave(&rtc_lock, flags); + outb_p (0x8f, 0x70); + chkpnt++; + outb_p (0x09, 0x71); + chkpnt++; + spin_unlock_irqrestore(&rtc_lock, flags); + } + + /* Remap the kernel at virtual address zero, as well as offset zero + from the kernel segment. This assumes the kernel segment starts at + virtual address PAGE_OFFSET. */ + + if (chkpnt<300) { + chkpnt=300; + memcpy (swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, + sizeof (swapper_pg_dir [0]) * KERNEL_PGD_PTRS); + chkpnt++; + } + + /* Make sure the first page is mapped to the start of physical memory. + It is normally not mapped, to trap kernel NULL pointer dereferences. + */ + + if (chkpnt<400) { + int page; + + chkpnt=400; + for (page=0; page < ((FREEMEMORY+PAGE_SIZE-1) >> PAGE_SHIFT); page++) + pg0[page] = _PAGE_RW | _PAGE_PRESENT; + chkpnt++; + } + + /* + * Use `swapper_pg_dir' as our page directory. + */ + + if (chkpnt<500) { + chkpnt=500; + asm volatile("movl %0,%%cr3": :"r" (__pa(swapper_pg_dir))); + chkpnt++; + } + + /* to avoid that the bios thinks we pressed Ctrl-Alt-Del : */ + if (chkpnt<600) { + chkpnt=600; +#ifdef REALLY_USE_REBOOT_SETUP + reboot_setup("c", NULL); + chkpnt++; + *((unsigned short *)0x472) = reboot_mode; +#else + *((unsigned short *)0x472) = 0x0; +#endif + chkpnt++; + } + /* For the switch to real mode, copy some code to low memory, out of + the way of BIOS variables. */ + + if (chkpnt<700) { + chkpnt=700; + memset ((char *)CODEORIGIN, 0, 0x1000-CODEORIGIN); /* get a clean first page */ + chkpnt++; + + /* the main real mode code */ + memcpy ((char *)CODEORIGIN, kmsgdump, kmsgdump_end-kmsgdump); + chkpnt++; + } + + /* configure parameters from kmsgdump_flags */ + if (chkpnt<800) { + char *c; + int *var = NULL; + int val = 0; + chkpnt = 800; + + c = kmsgdump_flags; + while (*c) { + switch(*c) { + case 'F' : modeflags |= MASK_OUTPUTFAT; break; + case 'R' : modeflags &= ~MASK_OUTPUTFAT; break; + case 'I' : modeflags |= MASK_PANICMAN; break; + case 'A' : modeflags &= ~MASK_PANICMAN; break; + case 'B' : modeflags |= MASK_PANICBOOT; break; + case 'H' : modeflags &= ~MASK_PANICBOOT; break; + case 'S' : modeflags |= MASK_SAFEDUMP; break; + case 'O' : modeflags &= ~MASK_SAFEDUMP; break; + case 'E' : modeflags |= MASK_PANICDUMP; break; + case 'D' : modeflags &= ~MASK_PANICDUMP; break; + case 'T' : var = &track; val = 0; break; + case 'U' : var = &unit; val = 0; break; + } + if (*c>='0' && *c<='9') + val=(val*10)+(*c-'0'); + c++; + /* when the number ends, assign it to the variable */ + if ((*c<'0' || *c>'9') && (var != NULL)) { + *var = val; + } + } + chkpnt++; + + *(char *)DRIVENUM = unit; + chkpnt++; + *(char *)TRACKNUM = track; + chkpnt++; + + /* this will be configurable one day too :-) */ + *(char *)MODEFLAGS = modeflags; + chkpnt++; + } + + + if (chkpnt<900) { + chkpnt=900; + if (callertype == DUMP_FROM_SYSRQ) + *(char *)MODEFLAGS |= MASK_SYSRQMODE; + chkpnt++; + } + + + if (chkpnt<1000) { + chkpnt=1000; + memset (phys_to_virt(BEGINOFMESSAGES), 0, LOG_BUF_LEN); /* pre-initialize the messages buffer */ + chkpnt++; + dump_syslog(phys_to_virt(BEGINOFMESSAGES)); /* get last messages */ + chkpnt++; + } + + /* We only have to inform the Bios to where we need to jump, + and initialize an image of the register bank in memory. */ + if (chkpnt<1100) { + chkpnt=1100; + *((unsigned short *)(BOOTSTACKFRAME+0x16)) = 0; /* CS */ + chkpnt++; + *((unsigned short *)(BOOTSTACKFRAME+0x14)) = CODEORIGIN; /* IP */ + chkpnt++; + + *((unsigned short *)0x467) = ((int)BOOTSTACKFRAME) & 0xFFFF; + chkpnt++; + *((unsigned short *)0x469) = ((int)BOOTSTACKFRAME)>>4 & 0xF000; + chkpnt++; + } + + /* now we have to hardly reset the CPU. */ + if (chkpnt<1200) { + chkpnt=1200; + for (;;) { + int i; + for (i=0; i<100; i++) { + kb_wait(); + udelay(50); + outb(0xfe,0x64); /* pulse reset low */ + udelay(50); + } + /* That didn't work - force a triple fault.. */ + __asm__ __volatile__("lidt %0": :"m" (no_idt)); + __asm__ __volatile__("int3"); + } + chkpnt++; + } +} +#endif /* CONFIG_KMSGDUMP */ + /* * Capture the user space registers if the task is not running (in user space) */ diff -urN -X dontdiff linux-2.5.47/Documentation/kmsgdump.txt linux-2.5.47-kmd/Documentation/kmsgdump.txt --- linux-2.5.47/Documentation/kmsgdump.txt 1969-12-31 19:00:00.000000000 -0500 +++ linux-2.5.47-kmd/Documentation/kmsgdump.txt 2002-11-16 15:38:32.000000000 -0500 @@ -0,0 +1,363 @@ + - Documentation for KMSGDUMP v0.4 - + [Sun Sep 19 19:30:32 CEST 1999] - Willy Tarreau + + +1. What is KMSGDUMP ? +~~~~~~~~~~~~~~~~~~~~~ + +KMSGDUMP is an extension to the Linux kernel which allows the user on the +console to dump the last kernel messages onto a floppy diskette, thus +avoiding to take a pen and a paper to copy them when the system is stuck. +Only 3"1/2, 1.44 MB diskettes are supported by default. Other capacities +might work, provided you change the geometry in the file "kmsgdump.h". + + +2. How does it work ? +~~~~~~~~~~~~~~~~~~~~~ + +There are two ways of getting a dump : + + - by pressing SysRQ+D (RightAlt - PrintScrn - D together) ; + - after a kernel panic has occured, a dump may be automatically + generated. + +Before anything else, you MUST KNOW that in order to get maximal +chances to complete the dump succesfully, the CPU is rebooted in +real mode and disk accesses are made via the Bios. This ensures +that even if kernel memory is really corrupted, the dump still +has chances to work, but this also implies that after a dump has +occured, it is IMPOSSIBLE TO CONTINUE TO WORK WITH THE CURRENT +KERNEL. You will have to REBOOT. So when your kernel still responds, +you'd better get a similar dump by entering one of the following +commands : + +# dmesg > /dev/fd0 ( for RAW mode ) + +or + +# dmesg | mwrite a:messages.txt ( for FAT mode ) + + +Second, be sure that FLOPPY CONTENTS WILL BE LOST AFTER A DUMP. +Even if there are cases in which you can dump at the end of a diskette without +losing the beginning, consider that by default the beginning of the diskette +will be ERASED and you won't be able to recover what's on it. You have been +warned. + + +3. Modes of operation +~~~~~~~~~~~~~~~~~~~~~ + +There are two modes of operation : manual and automated. + +Manual mode (or interactive mode) is always entered if you hit SysRQ+D. +But it is also entered during a kernel panic if the current mode is set +to "manual". This mode is recommended for a developper's workstation, +or a kernel running under an emulator such as vmware. It's recommended +to disable interactive mode on servers which may crash when nobody is +near to reboot them. + +Automatic mode can only be entered during a kernel panic and if automatic +mode was previously configured. Sometimes, the system is really weird and +even kmsgdump can cause recursive crashes (this has been reported to me once). +For this reason I've added a checkpoint mechanism to the code : every little +part of code is checkpointed, and if a crash occurs again, the same part is +not executed again, to prevent loopings. So there are more chances to get +to the reset routine which will, in the worst case, reboot the system, but +not let it loop undefinetely. + +3.1. Manual mode +~~~~~~~~~~~~~~~~ + +Under manual mode, the screen initialized to color 80x25 mode (bios mode 3) +with a blue background. + + [Note: some people asked me to set other colors to avoid confusion + with another OS' BSOD, but I couldn't find good associations. + Even though I've received an interesting comment about the way + to choose colors readable on any color or monochrome display, + I'm waiting for suggestions, and for the moment we'll say that + these are the colors of Midnight Commander and call this "BSOL" + (blue screen of life) because this one is interactive.] + +The screen is divided in two portions. The upper one displays the current +status (kernel version, drive unit, printer, format...), and the lower one +the messages captured before switching to real mode. The internal speaker +beeps if a key has not been hit within 3 seconds. This is simply to get +someone's attention, mainly in cases where no monitor is connected to the +PC. + +The interface is not case-sensitive about keys pressed. Keys used are : + Upper arrow : scroll messages to the beginning + Lower arrow : scroll messages to the end + B : immediately reBoot the system + D : Dump messages onto the selected floppy with selected format. Warning: + no check is done before, and the floppy will simply be overwritten by + the messages. + F : select Format, by switching between RAW and FAT12 + H : immediately Halt the system. + I : display Information, little help about the keys. + P : Print messages on the currently selected printer. If you press this key + by accident, wait about one minute for the bios routine to timeout, and + you'll here the beeps again, stating that you can play again. + T : select next available prinTer. The system tests if a printer is + connected at the other end of the cable, and skips the empty ports. + U : change drive Unit. Although dump is possible on hard disks, they are + never proposed in the interface to avoid dramatical mistakes. + +Other keys are simply ignored. + +After a succesful dump or print, 3 quick beeps are played. In case of an error, +only one beep is played. This is important if you act blindly with a keyboard +and no monitor. + +3.2. Automatic mode +~~~~~~~~~~~~~~~~~~~ + +Automated operation is performed by the system only when a kernel panic +occurs. In this case, the system waits for the "panic_timeout" delay +to let you a few seconds if you want to try to play with SysRQ (sync, +unmount filesystems, ...). This delay is configurable by entering a +number of seconds in "/proc/sys/kernel/panic". + +After that, the system is rebooted to real mode, and depending on the +mode of operation chosen, either the interactive mode is entered (see above) +or it is the automatic mode, which we'll describe here. + +3.2.1. Start of operation +~~~~~~~~~~~~~~~~~~~~~~~~~ +Some checks are performed. First, the system sees if the dump feature is +enabled or not. If not, operation ends (see below). If dump is enabled, +and if the "safe" flag is enabled, the diskette is verified to be a real +"KMSGDUMP" diskette and not another one (read section 4 to know how to +prepare a secure diskette for KMSGDUMP). If the diskette isn't a right one, +operation ends. If the diskette is a right one, or if the check has been +disabled, the dump is performed with the current parameters (unit, format...). + +3.2.2. End of operation +~~~~~~~~~~~~~~~~~~~~~~~ +After completion of an automatic dump, or when a dump is aborted, the system +can either halt or reboot. In case of redundant servers, you may prefer halt +a buggy system, because another one ensures the service continues to work. +But in other cases, you may prefer rebooting to quickly restart services. +This is also configurable (read section 4). + + +4. How a crash can be prepared +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +4.1. Kernel options +~~~~~~~~~~~~~~~~~~~ + +First, choose the kernel compilation options which matches better your +situation. This may seem obvious, but you can reduce the risks of crash +by not enabling drivers designated for hardware you don't have. Specially +on servers, use only a reduced feature set, because you know exactly what +you need (eg: don't enable NTFS and QNX filesystems if you don't need them). + +Configure KMSGDUMP options to match your needs. Don't ask to auto-dump if +you don't have a floppy drive. In this case, you might prefer to enable +interactive mode to display messages on the screen and eventually print +them. + +When you use SCSI hard disks, you can sometimes reduce the reset time to +help the system recover faster. Eg: on my system, I have an AHA2940UW which +waits 15 seconds by default. All peripherals still work well with 1 second, +so 14 seconds are won. + +If you have changed your messages buffer size (which is 16 kB by default), +you should accord the size in "include/asm/kmsgdump.h", parameter LOG_BUG_LEN. +Some people required 32 kB. But you shouldn't exceed 60 kB since the dump is +done in real mode (16 bits). + +4.2. Configure KMSGDUMP +~~~~~~~~~~~~~~~~~~~~~~~ + +If your kernel supports SYSCTL, you can adjust KMSGDUMP parameters by +writing a string to /proc/sys/kernel/kmsgdump. This string consists in +a concatenation of flags. Most of them are only booleans. For each boolean, +a complementary flag exists to avoid any ambiguous interpretation. +For the moment, the flags are : + + Name Description Default Complement + F FAT mode Yes R + R Raw mode F + A Automatic mode Yes I + I Interactive mode A + B Boot after dump Yes H only used in automatic mode + H Halt after dump B only used in automatic mode + S Safe mode Yes O only used in automatic mode + O Overwrite disk S only used in automatic mode + E Enable dumping Yes D only used in automatic mode + D Disable dumping E only used in automatic mode + Txxx Track xxx 0 (N/A) first track is 0 per default + Uxxx Unit xxx 0 (N/A) bios drive is 0 (A:) per default + +Note: default means "default if none specified". + +Example: if you enter the following command, a kernel panic will generate + a dump in FAT mode after verifying that the disk has been prepared + for a dump, and then it will reboot : + + # echo "FABSE" > /proc/sys/kernel/kmsgdump + +This one will ask to dump raw messages at the end of the diskette in drive B +and halt : + + # echo "RABOET79U1" > /proc/sys/kernel/kmsgdump + +And this one will ask for a quick reboot : + + # echo "DB" > /proc/sys/kernel/kmsgdump + + +4.3. Prepare a disk for kmsgdump +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If safe mode is required, before an automatic dump, the system will read +the beginning of the floppy in the drive and will look for the word "KMSGDUMP" +at offset 3 of the first sector. This is the label of the diskette. The dump +will only be performed if this word is found as-is. So if you enable safe mode +don't forget to prepare your diskettes with the following command, provided +your diskette is in drive A : + + # echo "012KMSGDUMP" > /dev/fd0 + +Please note that when the dump is performed in FAT mode, this word is written +to the same place. This has two side effects : + - a diskette on which a dump has been done in FAT mode is re-usable without + intervention. + - you can prepare a diskette by entering kmsgdump (SysRQ+D) and doing a + FAT mode dump. + +On the other hand, when a RAW dump is done at the beginning of the disk, it +cannot be used again as a "safe kmsgdump disk". Moreover, letting it in the +drive when rebooting will cause the system to hang if the bios tries to boot +from the floppy first. + +4.4. Prepare the PC for a crash +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Because you'll have to leave a diskette in a drive, you may have to setup +your bios to boot from hard disk or anything but the floppy first because +the bios will find anything but a bootable system on this floppy. The problem +is with older systems on which the boot sequence cannot be changed. For this +reason, when a diskette is formated in FAT mode, a small code is inserted on +the boot sector which tries to redirect the boot to the first hard disk seen +by the bios. This is *generally* the bootable disk, but this may not be the +right on specific systems, so you may have to do some tests before considering +this option to be the right one for you. + +If your system is a server, you may reduce the time the bios tests the PC to +ensure quick reboot. On some systems, you can turn on the option "Quick +power-on self test", and disable testings of memory above 1MB. + + +5. Reading the messages back +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +5.1. FAT-formated disks +~~~~~~~~~~~~~~~~~~~~~~~ + +If the disk has been formated as FAT12, you'll find on it a file +named "MESSAGES.TXT" which contains all messages buffer. If the +buffer is not full, the end of the file is filled with zeroes, so +it's better to delete them using "tr" under linux. + + - under Linux, either mount the disk : + + # mount -rt msdos /dev/fd0 /mnt + # cat /mnt/messages.txt | tr -d '\000' + # umount /mnt + + or read it using mtools : + + # mtype a:messages.txt | tr -d '\000' + + - under DOS, you can simply run EDIT : + + C:\> edit a:messages.txt + + - under Windows, you can open the file with Wordpad. Avoid using + Notepad since it doesn't understand linefeeds only. + +5.2. RAW disks +~~~~~~~~~~~~~~ + +Raw disks will be readable under linux by using the utility DD. By +default, the dump will be performed from the first sector of the disk. +Example with 16 kB messages : + + # dd if=/dev/fd0 bs=512 count=32 | tr -d '\000' + +If you specified "T79" in the parameters to dump on track 79 of the disk, +you have to do some calculations : + +A 1.44 MB disk has 18 sectors/track, 2 heads and 512 bytes/sector so +18*2*512 equals 18432 bytes/track. You'll have to skip 18432 bytes for +each unwanted track. But you can also count only with kilobytes : if you +consider that a track is exactly 18 kilobytes, then skip the number of +tracks times 18 kilobytes : + + # expr 79 \* 18 + 1422 + # dd if=/dev/fd0 bs=1024 skip=1422 count=16 | tr -d '\000' + +The default dd utility reads all data from the start of the disk so this can +be quite long. There are other implementations on the net which do an "lseek" +before the first read. + + +6. Other speed improvements +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Here are some advices to make a system reboot faster, especially if +you don't use filesystem journalling. + +When a file server crashes, it may FSCK during a long time. There are good docs +about how to dramatically reduce FSCK time, but at least consider these +methods : + + - in /etc/fstab, set the sixth field (fs_passno) to 1 for the root fs, + and 2 for every other fs. FSCK will know it what it can parallelize + depending on hardware dependencies. In the better case, you can devide + the total time by the number of physical disks. + (man fstab and man fsck for more info). + + - when possible, mount filesystems read-only. On an anonymous FTP server, + for example, it's not always necessary to mount everything RW. So before + copying files onto an fs, remount it RW : + + # mount -wo remount /mount/point + + At the end, remount it RO : + + # mount -ro remount /mount/point + + - change the number of bytes by inode and the block size when formating + your FS. I personnaly use 16384 bytes/inode, a block size of 4096 bytes, + the sparse flag set (reduces the number of superblocks). This makes me + waste about 1% space, but total mount time is about 1 second for a total + of 8 FS's, 11 gigs on 5 separate disks and the total FSCK time after a + loosy power-off is less than 3 minutes. + +And of course, don't start services you don't need ! Sendmail itself can take +a long time if it cannot resolve the domain name. + + +7. For more information and/or suggestions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For more informations, you can email me at : + + willy AT meta-x.org + +( be patient, I read my mail when I can, and can't always reply. I'm + used to "tail -1000 $MAIL|less" or "less +G $MAIL" ) + +For suggestions, you can either email them to me, or share them with +the Linux Kernel Mailing List : + + linux-kernel@vger.kernel.org + +Enjoy using it, + +Willy + diff -urN -X dontdiff linux-2.5.47/drivers/char/sysrq.c linux-2.5.47-kmd/drivers/char/sysrq.c --- linux-2.5.47/drivers/char/sysrq.c 2002-11-10 22:28:29.000000000 -0500 +++ linux-2.5.47-kmd/drivers/char/sysrq.c 2002-11-16 15:46:13.000000000 -0500 @@ -81,6 +81,24 @@ }; #endif +#if defined(__i386__) && defined(CONFIG_KMSGDUMP) +extern void machine_dump(int); + +static void sysrq_handle_dump(int key, struct pt_regs *pt_regs, + struct kbd_struct *kbd, struct tty_struct *tty) { + machine_dump(1);/* 1 = "dump called from SysRq, so interactive mode expected" */ +} + +static struct sysrq_key_op sysrq_dump_op = { + handler: sysrq_handle_dump, + help_msg: "Dump", + action_msg: "Trying to dump through real mode\n", +}; +#endif + + + + #ifdef CONFIG_VT /* unraw sysrq handler */ static void sysrq_handle_unraw(int key, struct pt_regs *pt_regs, @@ -369,7 +387,11 @@ #else /* c */ NULL, #endif -/* d */ NULL, +#if defined(__i386__) && defined(CONFIG_KMSGDUMP) +/* d */ &sysrq_dump_op, +#else +/* d */ NULL, +#endif /* e */ &sysrq_term_op, /* f */ NULL, /* g */ NULL, diff -urN -X dontdiff linux-2.5.47/include/asm-i386/kmsgdump.h linux-2.5.47-kmd/include/asm-i386/kmsgdump.h --- linux-2.5.47/include/asm-i386/kmsgdump.h 1969-12-31 19:00:00.000000000 -0500 +++ linux-2.5.47-kmd/include/asm-i386/kmsgdump.h 2002-11-16 15:38:32.000000000 -0500 @@ -0,0 +1,91 @@ +/* + * file : asm/kmsgdump.h + * version : 0.4.1/1999102301 + * author : Willy Tarreau <willy AT meta-x.org> + * + * Contents: several constants common to the ASM and C parts + * + */ + +/* LOG_BUF_LEN : should match </usr/src/linux/kernel/printk.c>'s */ +#ifndef LOG_BUF_LEN +#define LOG_BUF_LEN (16384) +#endif + +#define CODEORIGIN 0x0700 +#define TOPOFSTACK 0x0FB0 +#define BEGINOFMESSAGES 0x1000 +#define FREEMEMORY (BEGINOFMESSAGES+LOG_BUF_LEN) + +#define BOOTSTACKFRAME 0xFB0 +#define DRIVENUM 0xFF0 +#define TRACKNUM 0xFF1 +#define MODEFLAGS 0xFF2 + +/* bits definitions for MODEFLAGS */ +#define MASK_SYSRQMODE 0x80 +#define MASK_OUTPUTFAT 0x40 +#define MASK_PANICMAN 0x20 +#define MASK_PANICDUMP 0x10 +#define MASK_PANICBOOT 0x08 +#define MASK_SAFEDUMP 0x04 + +/* type of function which requested a dump */ +#define DUMP_FROM_PANIC 0 +#define DUMP_FROM_SYSRQ 1 + +#ifdef __ASSEMBLY__ + +#define CLOCKTICKS 0x46C +#define VIDEOMODE 3 +#define HELPLINE 5 +#define BOTTOMLINE 24 +#define RIGHTCOL 79 +#define ATTRIB 0x1B +#define HIGHLIGHT 0x1F + +/* specify here the format of the diskette, 1.44 MB by default */ +#define NBHEADS 2 +#define NBSECT 18 +#define NBTRACKS 80 + +/* let's compute some useful parameters from the diskette geometry */ +#define SECTPERCLUST 1 +#define FIRSTCLUSTER 2 + +/* At the moment, most versions of gas are broken so you can't activate + the following line which is the correct one. However, as long as the + constant SECTPERCLUST equals 1, the next line can be used as a replacement. + If you change the value of SECTPERCLUST, you'll have to change the + definition of NBCLUSTERS WITHOUT involving the divide operation which older + gas interpret as a comment. Versions from binutils 2.9.4 and later seem OK. +*/ + +#if THIS_GAS_IS_REALLY_GOOD +# define NBCLUSTERS ((NBHEADS*NBTRACKS*NBSECT)/SECTPERCLUST) +#else +# define NBCLUSTERS (NBHEADS*NBTRACKS*NBSECT) +#endif + +#define FATSIZE ((NBCLUSTERS*3+1023)>>10) + +#define STATUS_WAITING 0 +#define STATUS_FORMATING 1 +#define STATUS_DUMPING 2 +#define STATUS_DUMPOK 3 +#define STATUS_BOOTING 4 +#define STATUS_HALTING 5 +#define STATUS_PROBING 6 +#define STATUS_PRINTING 7 +#define STATUS_WERR 8 +#define STATUS_MAXMSG 8 + +#define MKWORD(h,l) ((h)<<8|(l)) + +#else /* C headers */ + +extern void kmsgdump(void); +extern void kmsgdump_end(void); + +#endif + diff -urN -X dontdiff linux-2.5.47/include/linux/sysctl.h linux-2.5.47-kmd/include/linux/sysctl.h --- linux-2.5.47/include/linux/sysctl.h 2002-11-10 22:28:16.000000000 -0500 +++ linux-2.5.47-kmd/include/linux/sysctl.h 2002-11-16 15:38:32.000000000 -0500 @@ -117,6 +117,7 @@ KERN_MSGMNI=42, /* int: msg queue identifiers */ KERN_SEM=43, /* struct: sysv semaphore limits */ KERN_SPARC_STOP_A=44, /* int: Sparc Stop-A enable */ + KERN_KMSGDUMP=44, /* string: kmsgdump flags. Reuse Stop-A ID */ KERN_SHMMNI=45, /* int: shm array identifiers */ KERN_OVERFLOWUID=46, /* int: overflow UID */ KERN_OVERFLOWGID=47, /* int: overflow GID */ diff -urN -X dontdiff linux-2.5.47/kernel/panic.c linux-2.5.47-kmd/kernel/panic.c --- linux-2.5.47/kernel/panic.c 2002-11-10 22:28:31.000000000 -0500 +++ linux-2.5.47-kmd/kernel/panic.c 2002-11-16 15:49:22.000000000 -0500 @@ -17,6 +17,10 @@ #include <linux/sysrq.h> #include <linux/interrupt.h> +#if defined(__i386__) && defined(CONFIG_KMSGDUMP) +extern void machine_dump(int); +#endif + asmlinkage void sys_sync(void); /* it's really int */ int panic_timeout; @@ -66,6 +70,26 @@ smp_send_stop(); #endif +#if defined(__i386__) && defined(CONFIG_KMSGDUMP) + /* We allow SysRq to be used for <panic_timeout> seconds, and + then the dump is forced. This way, if IRQs are frozen and + keyboard doesn't respond anymore, the system can dump messages + and reboot itself. + This code has been voluntarily inserted before notifier_call_chain + to ensure proper execution in case of crash. Please tell me if this + can be wrong. + */ + printk(KERN_EMERG "Dumping messages in %d seconds : last chance for Alt-SysRq...", + panic_timeout); + sti(); + for(panic_timeout*=10; panic_timeout>0; panic_timeout--) { + CHECK_EMERGENCY_SYNC; + mdelay(100); + } + machine_dump(0); /* 0 tells machine_dump that it's called from panic() */ +#endif + + notifier_call_chain(&panic_notifier_list, 0, buf); if (panic_timeout > 0) diff -urN -X dontdiff linux-2.5.47/kernel/printk.c linux-2.5.47-kmd/kernel/printk.c --- linux-2.5.47/kernel/printk.c 2002-11-10 22:28:32.000000000 -0500 +++ linux-2.5.47-kmd/kernel/printk.c 2002-11-16 15:38:32.000000000 -0500 @@ -307,6 +307,36 @@ return error; } +#if defined(__i386__) && defined(CONFIG_KMSGDUMP) +/* + * dump_syslog() : Added on 19991020 by Willy Tarreau <willy AT meta-x.org> + * This function is only used by machine_dump. It basically does the same + * as do_syslog(3), but avoids to check if *buf is writeable because this + * sometimes made the system crash in case of real instability (common + * case when machine_dump is called). + */ + +void dump_syslog(char *buf) { + unsigned long i, j, count; + + if (!buf) + return; + /* + * The logged_chars, log_start, and log_size values may + * change from an interrupt, so we disable interrupts. + */ + spin_lock_irq(&logbuf_lock); + count = LOG_BUF_LEN; + if (count > logged_chars) + count = logged_chars; + j = log_start; + for (i = 0; (i < count) && (j != log_end); i++, j++) { + buf[i] = LOG_BUF(j); + } + spin_unlock_irq(&logbuf_lock); +} +#endif + asmlinkage long sys_syslog(int type, char * buf, int len) { if ((type != 3) && !capable(CAP_SYS_ADMIN)) diff -urN -X dontdiff linux-2.5.47/kernel/sysctl.c linux-2.5.47-kmd/kernel/sysctl.c --- linux-2.5.47/kernel/sysctl.c 2002-11-10 22:28:04.000000000 -0500 +++ linux-2.5.47-kmd/kernel/sysctl.c 2002-11-16 15:38:32.000000000 -0500 @@ -77,6 +77,10 @@ extern int sem_ctls[]; #endif +#if defined(__i386__) && defined(CONFIG_KMSGDUMP) +extern char kmsgdump_flags[]; +#endif + #ifdef __sparc__ extern char reboot_command []; extern int stop_a_enabled; @@ -238,6 +242,10 @@ {KERN_SYSRQ, "sysrq", &sysrq_enabled, sizeof (int), 0644, NULL, &proc_dointvec}, #endif +#if defined(__i386__) && defined(CONFIG_KMSGDUMP) + {KERN_KMSGDUMP, "kmsgdump", &kmsgdump_flags, 16, + 0644, NULL, &proc_dostring, &sysctl_string }, +#endif {KERN_CADPID, "cad_pid", &cad_pid, sizeof (int), 0600, NULL, &proc_dointvec}, {KERN_MAX_THREADS, "threads-max", &max_threads, sizeof(int),

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Nov 23 2002 - 22:00:18 EST