- new locking
- new_eh
- use ->page/->offset
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.2.5.41/drivers/scsi/in2000.c linux.2.5.41-ac2/drivers/scsi/in2000.c
--- linux.2.5.41/drivers/scsi/in2000.c 2002-10-02 21:32:55.000000000 +0100
+++ linux.2.5.41-ac2/drivers/scsi/in2000.c 2002-10-09 16:23:17.000000000 +0100
@@ -317,13 +317,15 @@
static void in2000_execute(struct Scsi_Host *instance);
-int in2000_queuecommand (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int in2000_queuecommand (Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
{
+struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
Scsi_Cmnd *tmp;
unsigned long flags;
- hostdata = (struct IN2000_hostdata *)cmd->host->hostdata;
+ instance = cmd->host;
+ hostdata = (struct IN2000_hostdata *)instance->hostdata;
DB(DB_QUEUE_COMMAND,printk("Q-%d-%02x-%ld(",cmd->target,cmd->cmnd[0],cmd->pid))
@@ -355,7 +357,7 @@
if (cmd->use_sg) {
cmd->SCp.buffer = (struct scatterlist *)cmd->buffer;
cmd->SCp.buffers_residual = cmd->use_sg - 1;
- cmd->SCp.ptr = (char *)cmd->SCp.buffer->address;
+ cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page)+cmd->SCp.buffer->offset;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
}
else {
@@ -391,9 +393,7 @@
* queue and calling in2000_execute().
*/
- save_flags(flags);
- cli();
-
+ spin_lock_irqsave(instance->host_lock, flags);
/*
* Add the cmd to the end of 'input_Q'. Note that REQUEST_SENSE
* commands are added to the head of the queue so that the desired
@@ -418,8 +418,7 @@
in2000_execute(cmd->host);
DB(DB_QUEUE_COMMAND,printk(")Q-%ld ",cmd->pid))
-
- restore_flags(flags);
+ spin_unlock_irqrestore(instance->host_lock, flags);
return 0;
}
@@ -762,7 +761,7 @@
++cmd->SCp.buffer;
--cmd->SCp.buffers_residual;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
- cmd->SCp.ptr = cmd->SCp.buffer->address;
+ cmd->SCp.ptr = page_address(cmd->SCp.buffer->page) + cmd->SCp.buffer->offset;
}
/* Set up hardware registers */
@@ -855,7 +854,7 @@
/* Get the spin_lock and disable further ints, for SMP */
- CLISPIN_LOCK(instance, flags);
+ spin_lock_irqsave(instance->host_lock, flags);
#ifdef PROC_STATISTICS
hostdata->int_cnt++;
@@ -993,7 +992,7 @@
write1_io(0, IO_LED_OFF);
/* release the SMP spin_lock and restore irq state */
- CLISPIN_UNLOCK(instance, flags);
+ spin_unlock_irqrestore(instance->host_lock, flags);
return;
}
@@ -1011,7 +1010,7 @@
write1_io(0, IO_LED_OFF);
/* release the SMP spin_lock and restore irq state */
- CLISPIN_UNLOCK(instance, flags);
+ spin_unlock_irqrestore(instance->host_lock, flags);
return;
}
@@ -1433,7 +1432,7 @@
hostdata->state = S_UNCONNECTED;
/* release the SMP spin_lock and restore irq state */
- CLISPIN_UNLOCK(instance, flags);
+ spin_unlock_irqrestore(instance->host_lock, flags);
return;
}
DB(DB_INTR,printk("UNEXP_DISC-%ld",cmd->pid))
@@ -1609,7 +1608,7 @@
DB(DB_INTR,printk("} "))
/* release the SMP spin_lock and restore irq state */
- CLISPIN_UNLOCK(instance, flags);
+ spin_unlock_irqrestore(instance->host_lock, flags);
}
@@ -1619,11 +1618,14 @@
#define RESET_CARD_AND_BUS 1
#define B_FLAG 0x80
+/*
+ * Caller must hold instance lock!
+ */
+
static int reset_hardware(struct Scsi_Host *instance, int type)
{
struct IN2000_hostdata *hostdata;
int qt,x;
-unsigned long flags;
hostdata = (struct IN2000_hostdata *)instance->hostdata;
@@ -1638,16 +1640,16 @@
write_3393(hostdata,WD_CONTROL, CTRL_IDI | CTRL_EDI | CTRL_POLLED);
write_3393(hostdata,WD_SYNCHRONOUS_TRANSFER,
calc_sync_xfer(hostdata->default_sx_per/4,DEFAULT_SX_OFF));
- save_flags(flags);
- cli();
+
write1_io(0,IO_FIFO_WRITE); /* clear fifo counter */
write1_io(0,IO_FIFO_READ); /* start fifo out in read mode */
write_3393(hostdata,WD_COMMAND, WD_CMD_RESET);
+ /* FIXME: timeout ?? */
while (!(READ_AUX_STAT() & ASR_INT))
- ; /* wait for RESET to complete */
+ cpu_relax(); /* wait for RESET to complete */
x = read_3393(hostdata,WD_SCSI_STATUS); /* clear interrupt */
- restore_flags(flags);
+
write_3393(hostdata,WD_QUEUE_TAG,0xa5); /* any random number */
qt = read_3393(hostdata,WD_QUEUE_TAG);
if (qt == 0xa5) {
@@ -1662,7 +1664,7 @@
-int in2000_reset(Scsi_Cmnd *cmd, unsigned int reset_flags)
+static int in2000_bus_reset(Scsi_Cmnd *cmd)
{
unsigned long flags;
struct Scsi_Host *instance;
@@ -1672,10 +1674,9 @@
instance = cmd->host;
hostdata = (struct IN2000_hostdata *)instance->hostdata;
- printk("scsi%d: Reset. ", instance->host_no);
- save_flags(flags);
- cli();
+ printk(KERN_WARNING "scsi%d: Reset. ", instance->host_no);
+ spin_lock_irqsave(instance->host_lock, flags);
/* do scsi-reset here */
reset_hardware(instance, RESET_CARD_AND_BUS);
@@ -1694,13 +1695,22 @@
hostdata->outgoing_len = 0;
cmd->result = DID_RESET << 16;
- restore_flags(flags);
- return 0;
+ spin_unlock_irqrestore(instance->host_lock, flags);
+ return SUCCESS;
}
+static int in2000_host_reset(Scsi_Cmnd *cmd)
+{
+ return FAILED;
+}
+static int in2000_device_reset(Scsi_Cmnd *cmd)
+{
+ return FAILED;
+}
-int in2000_abort (Scsi_Cmnd *cmd)
+
+static int in2000_abort (Scsi_Cmnd *cmd)
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
@@ -1709,13 +1719,10 @@
uchar sr, asr;
unsigned long timeout;
- save_flags (flags);
- cli();
-
instance = cmd->host;
hostdata = (struct IN2000_hostdata *)instance->hostdata;
- printk ("scsi%d: Abort-", instance->host_no);
+ printk(KERN_DEBUG "scsi%d: Abort-", instance->host_no);
printk("(asr=%02x,count=%ld,resid=%d,buf_resid=%d,have_data=%d,FC=%02x)- ",
READ_AUX_STAT(),read_3393_count(hostdata),cmd->SCp.this_residual,cmd->SCp.buffers_residual,
cmd->SCp.have_data_in,read1_io(IO_FIFO_COUNT));
@@ -1725,6 +1732,7 @@
* from the inout_Q.
*/
+ spin_lock_irqsave(instance->host_lock, flags);
tmp = (Scsi_Cmnd *)hostdata->input_Q;
prev = 0;
while (tmp) {
@@ -1733,11 +1741,11 @@
prev->host_scribble = cmd->host_scribble;
cmd->host_scribble = NULL;
cmd->result = DID_ABORT << 16;
- printk("scsi%d: Abort - removing command %ld from input_Q. ",
+ printk(KERN_WARNING "scsi%d: Abort - removing command %ld from input_Q. ",
instance->host_no, cmd->pid);
cmd->scsi_done(cmd);
- restore_flags(flags);
- return SCSI_ABORT_SUCCESS;
+ spin_unlock_irqrestore(instance->host_lock, flags);
+ return SUCCESS;
}
prev = tmp;
tmp = (Scsi_Cmnd *)tmp->host_scribble;
@@ -1756,7 +1764,7 @@
if (hostdata->connected == cmd) {
- printk("scsi%d: Aborting connected command %ld - ",
+ printk(KERN_WARNING "scsi%d: Aborting connected command %ld - ",
instance->host_no, cmd->pid);
printk("sending wd33c93 ABORT command - ");
@@ -1800,7 +1808,6 @@
in2000_execute (instance);
- restore_flags(flags);
return SCSI_ABORT_SUCCESS;
}
@@ -1813,9 +1820,9 @@
for (tmp=(Scsi_Cmnd *)hostdata->disconnected_Q; tmp;
tmp=(Scsi_Cmnd *)tmp->host_scribble)
if (cmd == tmp) {
- restore_flags(flags);
- printk("Sending ABORT_SNOOZE. ");
- return SCSI_ABORT_SNOOZE;
+ spin_unlock_irqrestore(instance->host_lock, flags);
+ printk(KERN_DEBUG "scsi%d: unable to abort disconnected command.\n", instance->host_no);
+ return FAILED;
}
/*
@@ -1830,10 +1837,10 @@
in2000_execute (instance);
- restore_flags(flags);
+ spin_unlock_irqrestore(instance->host_lock, flags);
printk("scsi%d: warning : SCSI command probably completed successfully"
" before abortion. ", instance->host_no);
- return SCSI_ABORT_NOT_RUNNING;
+ return SUCCESS;
}
@@ -1845,7 +1852,7 @@
static char setup_used[MAX_SETUP_ARGS];
static int done_setup = 0;
-void __init in2000_setup (char *str, int *ints)
+static void __init in2000_setup (char *str, int *ints)
{
int i;
char *p1,*p2;
@@ -1931,7 +1938,7 @@
};
-int __init in2000_detect(Scsi_Host_Template * tpnt)
+static int __init in2000_detect(Scsi_Host_Template * tpnt)
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
@@ -2115,7 +2122,11 @@
#endif
+ /* FIXME: not strictly needed I think but the called code expects
+ to be locked */
+ spin_lock_irqsave(instance->host_lock, flags);
x = reset_hardware(instance,(hostdata->args & A_NO_SCSI_RESET)?RESET_CARD:RESET_CARD_AND_BUS);
+ spin_unlock_irqrestore(instance->host_lock, flags);
hostdata->microcode = read_3393(hostdata,WD_CDB_1);
if (x & 0x01) {
@@ -2158,7 +2169,7 @@
* supposed to do...
*/
-int in2000_biosparam(Disk *disk, struct block_device *dev, int *iinfo)
+static int in2000_biosparam(Disk *disk, struct block_device *dev, int *iinfo)
{
int size;
@@ -2190,7 +2201,7 @@
}
-int in2000_proc_info(char *buf, char **start, off_t off, int len, int hn, int in)
+static int in2000_proc_info(char *buf, char **start, off_t off, int len, int hn, int in)
{
#ifdef PROC_INTERFACE
@@ -2260,8 +2271,7 @@
return len;
}
- save_flags(flags);
- cli();
+ spin_lock_irqsave(instance->host_lock, flags);
bp = buf;
*bp = '\0';
if (hd->proc & PR_VERSION) {
@@ -2340,7 +2350,7 @@
; /* insert your own custom function here */
}
strcat(bp,"\n");
- restore_flags(flags);
+ spin_unlock_irqrestore(instance->host_lock, flags);
*start = buf;
if (stop) {
stop = 0;
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.2.5.41/drivers/scsi/in2000.h linux.2.5.41-ac2/drivers/scsi/in2000.h
--- linux.2.5.41/drivers/scsi/in2000.h 2002-10-02 21:32:55.000000000 +0100
+++ linux.2.5.41-ac2/drivers/scsi/in2000.h 2002-10-09 16:17:42.000000000 +0100
@@ -397,13 +397,15 @@
# define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \
flags)
-int in2000_detect(Scsi_Host_Template *) in2000__INIT;
-int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-int in2000_abort(Scsi_Cmnd *);
-void in2000_setup(char *, int *) in2000__INIT;
-int in2000_proc_info(char *, char **, off_t, int, int, int);
-int in2000_biosparam(struct scsi_disk *, struct block_device *, int *);
-int in2000_reset(Scsi_Cmnd *, unsigned int);
+static int in2000_detect(Scsi_Host_Template *) in2000__INIT;
+static int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int in2000_abort(Scsi_Cmnd *);
+static void in2000_setup(char *, int *) in2000__INIT;
+static int in2000_proc_info(char *, char **, off_t, int, int, int);
+static int in2000_biosparam(struct scsi_disk *, struct block_device *, int *);
+static int in2000_host_reset(Scsi_Cmnd *);
+static int in2000_bus_reset(Scsi_Cmnd *);
+static int in2000_device_reset(Scsi_Cmnd *);
#define IN2000_CAN_Q 16
@@ -411,19 +413,21 @@
#define IN2000_CPL 2
#define IN2000_HOST_ID 7
-#define IN2000 { proc_name: "in2000", /* name of /proc/scsi directory entry */ \
- proc_info: in2000_proc_info, /* pointer to proc info function */ \
- name: "Always IN2000", /* device name */ \
- detect: in2000_detect, /* returns number of in2000's found */ \
- queuecommand: in2000_queuecommand, /* queue scsi command, don't wait */ \
- abort: in2000_abort, /* abort current command */ \
- reset: in2000_reset, /* reset scsi bus */ \
- bios_param: in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \
- can_queue: IN2000_CAN_Q, /* max commands we can queue up */ \
- this_id: IN2000_HOST_ID, /* host-adapter scsi id */ \
- sg_tablesize: IN2000_SG, /* scatter-gather table size */ \
- cmd_per_lun: IN2000_CPL, /* commands per lun */ \
- use_clustering: DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \
+#define IN2000 { proc_name: "in2000", /* name of /proc/scsi directory entry */ \
+ proc_info: in2000_proc_info, /* pointer to proc info function */ \
+ name: "Always IN2000", /* device name */ \
+ detect: in2000_detect, /* returns number of in2000's found */ \
+ queuecommand: in2000_queuecommand, /* queue scsi command, don't wait */ \
+ eh_abort_handler: in2000_abort, /* abort current command */ \
+ eh_bus_reset_handler: in2000_bus_reset, /* reset scsi bus */ \
+ eh_device_reset_handler: in2000_device_reset, /* reset scsi device */ \
+ eh_host_reset_handler: in2000_host_reset, /* reset scsi hba */ \
+ bios_param: in2000_biosparam, /* figures out BIOS parameters for lilo, etc */ \
+ can_queue: IN2000_CAN_Q, /* max commands we can queue up */ \
+ this_id: IN2000_HOST_ID, /* host-adapter scsi id */ \
+ sg_tablesize: IN2000_SG, /* scatter-gather table size */ \
+ cmd_per_lun: IN2000_CPL, /* commands per lun */ \
+ use_clustering: DISABLE_CLUSTERING, /* ENABLE_CLUSTERING may speed things up */ \
}
#endif /* IN2000_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 15 2002 - 22:00:32 EST