On Sun, 2002-10-06 at 18:14, GrandMasterLee wrote:
> I just reassigned all my LUNs to be a part of the same host
> configuration on the storage(polling by HBAs and host, versus splitting
> LUNs by HBA). I do get more than 1 LUN now, but only EVEN luns. I'll see
> if I can identify why that is.
After defining LSI in drivers/scsi/scsi_scan.c I can get half my luns,
but still not all. I'm not sure what else I need to do. I now can see
LUNs 0,2,4,6,8, etc but not 1,3,5,7,etc. I'm not sure what else to do,
but maybe now that I've done this, I can get information from QLogic
about what should be happening. Or does this still seem like a kernel
config issue?
TIA
> > > You just need to get the Vendor and Model info from /proc/scsi/scsi
> > >
> > > I am using qlogic 2300s with sparse luns working fine on 2.4.18.
> >
> > using the LB static bindings and *failover* still works?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:57 EST