> > > > I've noticed that 8250 UART based serial port performance is poorer in
> > > > 2.5.x than 2.4.x and 2.2.x, on a couple of my machines.
> > > >
> > > > The 486 SX-20 with 4 MB RAM, running 2.2.21 reliably achieves about 650
> > > > BPS download from another machine, with the port runnnig at 9600 bps.
> > > > With 2.5.40, many characters are lost at 9600, making, e.g. a ZModem
> > > > transfer retry for almost every block.
> > >
> > > Have you tried 'hdparm -u'?
> >
> > Hmmm, I can do, but I thought it was a Bad Thing (tm) for ISA based
> > controllers? I could be wrong...
>
> Shouldn't it be fixed, it should work normally anyway.
Not sure, without interupt unmasking, I would expect excessive disk activity to potentially cause data loss, but there isn't excessive disk activity going on anyway.
If you look at:
http://www.uwsg.iu.edu/hypermail/linux/kernel/0207.3/0373.html
though, you'll see why I was asking for clarification before trying 'hdparm -u', because the laptop in question has a broken floppy drive, so if I corrupt the root filesystem, I've got to take it apart, and put the hard disk in another machine to re-install. Not a five minute job, by any means!
John.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:51 EST