Re: Kernel 2.5.40 DMA and mm issues

From: Nick Sanders (sandersn@btinternet.com)
Date: Sat Oct 05 2002 - 06:07:39 EST


On Friday 04 October 2002 9:12 pm, Zwane Mwaikambo wrote:
> On Fri, 4 Oct 2002, Nick Sanders wrote:
> > I get the same 'DMA disabled' messages with 2.5 but DMA is never actually
> > disabled so I wouldn't rely on them being accurate (see below)
> >
> > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1
> > PCI: Hardcoded IRQ 14 for device 00:11.1
> > VP_IDE: chipset revision 6
> > VP_IDE: not 100% native mode: will probe irqs later
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on
> > pci00:11.1 ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
> > ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio hda: WDC
> > WD400BB-00CAA0, ATA DISK drive
> > hdb: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive
> > hda: DMA disabled
> > hdb: DMA disabled
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > hdc: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
> > hdc: DMA disabled
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: host protected area => 1
> > hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63,
> > UDMA(100)
>
> IIRC not according to that line.
>

What line? All I meant was that the 'hda: DMA disabled' lines didn't actually
disable DMA unless it's reenabled quietly somewhere later on.

Nick

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:49 EST