tg3 and Netgear GA302T x 2 locks machine

From: Ben Greear (greearb@candelatech.com)
Date: Thu Oct 03 2002 - 23:19:37 EST

Next message: immortal1015: "How to replace the network cards"
Previous message: Muli Ben-Yehuda: "Re: export of sys_call_table"
Next in thread: Ben Greear: "Re: tg3 and Netgear GA302T x 2 locks machine"
Reply: Ben Greear: "Re: tg3 and Netgear GA302T x 2 locks machine"
Reply: David S. Miller: "Re: tg3 and Netgear GA302T x 2 locks machine"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Got my two new Netgear GA302t nics today. They seem to use the
tg3 driver....

I put them into the 64/66 slots on my Tyan dual amd motherboard..
Running kernel 2.4.20-pre8

eth2 is plugged into eth3 over cross-over cable.

The tg3 found and used them, mostly:

tg3.c:v1.1 (Aug 30, 2002)
eth2: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:40:f4:47:20:56
eth3: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:40:f4:47:22:fd
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is off for TX and off for RX.
...
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is off for TX and off for RX.
tg3: eth3: Link is down.
tg3: eth3: Link is up at 1000 Mbps, full duplex.
tg3: eth3: Flow control is on for TX and on for RX.

I tried to start traffic with pktgen, and the machine hangs solid.
The last thing I see is:

[root@localhost root]# tg3: eth2: transmit timed out, resetting

Any ideas? Is this NIC supposed to work with tg3?

Thanks,
Ben

-- Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: immortal1015: "How to replace the network cards"
Previous message: Muli Ben-Yehuda: "Re: export of sys_call_table"
Next in thread: Ben Greear: "Re: tg3 and Netgear GA302T x 2 locks machine"
Reply: Ben Greear: "Re: tg3 and Netgear GA302T x 2 locks machine"
Reply: David S. Miller: "Re: tg3 and Netgear GA302T x 2 locks machine"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:42 EST