Re: aic7xxx problems?

From: Justin T. Gibbs (gibbs@scsiguy.com)
Date: Wed Oct 02 2002 - 12:10:58 EST


>> Hi
>>
>> Maybe You can help me out with this one...
>> I have hp DLT connected to an adaptec SCSI board.
>
> From the perspective of the controller, the target has taken the
> full command but has yet to REQ for either a cdb transfer retry
> or a new phase. This looks like a target problem or a cabling
> problem that prevents the initiator from seeing a REQ or two.

Actually, in reviewing your message more fully, the problem is that
the timeout for the rewind operation is too short for your configuration.
The timeout should go away if you bump up the timeout in the st driver
so that your tape drive can rewind in peace.

--
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:35 EST