Hi there..
Just received a 3ware 7500-8 RAID card and am trying to get it installed
on a dual Athlon system with 4GB of RAM, running 2.4.19.
SCSI support and SCSI disk support are enabled.
Low level support for 3w-xxxx is enabled.
The RAID has been flashed to the latest hardware revision.
Kernel loads up fine, and gets to initializing the card, where it waits
for a while as it attempts to init and reinit, etc, the card. Ultimately,
it simply resets the card and takes the card offline. 'dmesg' reports
the following in the kernel log:
scsi0 : Found a 3ware Storage Controller at 0xc400, IRQ: 11, P-chip: 1.3
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
3w-xxxx: scsi0: Reset succeeded.
3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
scsi: device set offline - not ready or command retry failed after host reset:
host 0 channel 0 id 0 lun 0
Any ideas what the problem might be?
Ken Savage kens1835@shaw.ca
AllResearch.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 07 2002 - 22:00:34 EST