I tried to boot 2.5.39 on my home machine and got the
following oops on boot with CONFIG_KALLSYMS=y (thanks Ingo!).
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0060:[<c01a7979>] Not tainted
EFLAGS: 00010286
EIP is at attach+0x1d/0x30
eax: c0276724 ebx: 00000000 ecx: c40c8060 edx: c40c8078
esi: c0276700 edi: 00000000 ebp: 00000000 esp: c40ddf94
ds: 0068 es: 0068 ss: 0068
Process swapper (pid: 1, threadinfo=c40dc000 task=c40da040)
Stack: 00000000 c01a7a5a c40c8060 c40c8060 c01a7c20 c40c8060 c40c8060 c40c8060
c40d7720 c028b879 c40c8060 00000001 c02b9bf4 00000000 00000000 00000000
c027e6f2 c0105030 c010504c c0105030 00000000 00000000 00000000 c0105495
Call Trace:
[<c01a7a5a>] device_attach+0x3a/0x40
[<c01a7c20>] device_register+0xd0/0x120
[<c0105030>] init+0x0/0x160
[<c010504c>] init+0x1c/0x160
[<c0105030>] init+0x0/0x160
[<c0105495>] kernel_thread_helper+0x5/0x10
Code: 89 13 89 4c 24 08 5b e9 37 0d 00 00 8d b4 26 00 00 00 00 57
Spurious 8959A interrupt: IRQ7
Kernel panic: Attempted to kill init!
The "Spurious 8959A interrupt" message occurred only once among several
boot attempts with slightly differently configured kernels (taking more and more
stuff out like sound and usb). The traceback was the same each time however.
The box is a Gateway P450 single PIII with Jabil motherboard. I have a
Promise Ultra/66 disk controller installed. Support for the 20262 was
compiled into 2.5.39 with CONFIG_BLK_DEV_PDC202XX_OLD=y and CONFIG_BLK_DEV_PDC202XX=y.
Support for the PIIX4 was provided with CONFIG_BLK_DEV_PIIX=y.
I tried booting with the onboard IDE and then the PDC20262 with the same oops above.
Either of those work with 2.4.x kernels.
Here is a snippet from dmesg from a normal 2.4.18 boot:
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at port 0x02f8 (irq = 10) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:DMA, hdd:pio
PDC20262: IDE controller on PCI bus 00 dev 78
PCI: Found IRQ 5 for device 00:0f.0
PDC20262: chipset revision 1
PDC20262: not 100% native mode: will probe irqs later
PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide0: BM-DMA at 0x10c0-0x10c7, BIOS settings: hda:DMA, hdb:DMA
ide2: BM-DMA at 0x10c8-0x10cf, BIOS settings: hde:DMA, hdf:pio
hda: ST330620A, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8584A, ATAPI CD/DVD-ROM drive
ide0 at 0x1440-0x1447,0x1436 on irq 5
ide1 at 0x170-0x177,0x376 on irq 15
hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66)
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Steven
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Sep 30 2002 - 22:00:48 EST