AMD 768 erratum 10 (solved: AMD 760MPX DMA lockup)

From: Jan Kasprzak (kas@informatics.muni.cz)
Date: Wed Sep 25 2002 - 08:24:22 EST


        Hello, all!

two weeks ago I've posted to the LKML the following message:

[...]
: my dual athlon box is unstable in some situations. I can consistently
: lock it up by running the following code:
:
: fd = open("/dev/hda3", O_RDWR);
: for (i=0; i<1024*1024; i++) {
: read(fd, buffer, 8192);
: lseek(fd, -8192, SEEK_CUR);
: write(fd, buffer, 8192);
: }
[...]

        I think I have been hit by AMD 768 southbridge erratum number 10.
After plugging in the PS/2 mouse, the server is able to run 10 iterations
of bonnie++ without any problem (w/o PS/2 mouse it locks up in first
or second iterations).

        I want to ask everyone who replied to me that the above code
works for him on the 760MPX-based system to re-run the above code
(or run bonnie++ benchmark several times in a loop), but _without_
the PS/2 mouse connected?

        Since this is an official AMD errata, we should have a work-around
for this, or at least the big fat warning during boot, when the 768
southbridge is detected - something like the following:

WARNING: Using the system with AMD 768 southbridge without the PS/2
WARNING: mouse plugged in can cause instabilities. See the AMD 768 erratum #10

        The AMD 768 Revision Guide is at the following URL:

http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/24472.pdf

the erratum #10 is described on page 7 (pstotext output, manually edited):

: 10 Multiprocessor System May Hang While in FULL APIC Mode
: and IOAPIC Interrupt is Masked
:
: Products Affected. B1, B2
:
: Normal Specified Operation. The AMD-768 peripheral bus controller is
: designed to support FULL APIC mode in multiprocessor systems for system
: management events. If an interrupt is masked in the APIC controller of
: the AMD-768, then the corresponding interrupt message should not be
: sent to the processor via the 3-wire APIC bus.
:
: Non-conformance. The AMD-768 peripheral bus controller will send an
: interrupt message via the 3-wire APIC bus regardless if the interrupt
: is masked or not.
:
: Potential Effect on System. Since the processor had previously masked
: the APIC interrupt, it is not expecting to receive future APIC messages
: for the masked interrupt. The APIC controller will continuously send
: the interrupt message via the 3-wire bus until a processor accepts the
: message, causing the system to hang.
:
: A system hang has been observed when executing a server shutdown
: command in Novell Netware versions 5.0 or 5.1 while using a serial
: mouse. During the server shutdown sequence, software writes an invalid
: CPU ID to the IOAPIC redirection table, and the system does not
: complete the shutdown.
:
: Note: No failure has been observed when using a PS/2 mouse.
:
: Suggested Workaround. None.
:
: Resolution Status: No fix planned.

-- 
| Jan "Yenya" Kasprzak  <kas at {fi.muni.cz - work | yenya.net - private}> |
| GPG: ID 1024/D3498839      Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E |
| http://www.fi.muni.cz/~kas/   Czech Linux Homepage: http://www.linux.cz/ |
|----------- If you want the holes in your knowledge showing up -----------|
|----------- try teaching someone.                  -- Alan Cox -----------|
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Sep 30 2002 - 22:00:22 EST