[PATCH] 2.5.32 (repost) : [i2c] drivers/media/video/bt819.c

From: Frank Davis (fdavis@si.rr.com)
Date: Tue Aug 27 2002 - 17:50:12 EST


Linus,
  Here's the bt819 i2c-old --> i2c patch. Please review for inclusion.

Regards,
Frank

--- drivers/media/video/bt819.c.old Sun May 26 14:07:35 2002
+++ drivers/media/video/bt819.c Thu Jul 4 16:41:25 2002
@@ -39,15 +39,32 @@
 
 #include <linux/videodev.h>
 
-#include <linux/i2c-old.h>
+#include <linux/i2c.h>
 #include <linux/video_decoder.h>
 
 #define DEBUG(x) x /* Debug driver */
 
 /* ----------------------------------------------------------------------- */
 
+static unsigned short normal_i2c[] = {34>>1, I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
+static unsigned short probe[2] = { I2C_CLIENT_END , I2C_CLIENT_END };
+static unsigned short probe_range[2] = { I2C_CLIENT_END , I2C_CLIENT_END };
+static unsigned short ignore[2] = { I2C_CLIENT_END , I2C_CLIENT_END };
+static unsigned short ignore_range[2] = { I2C_CLIENT_END , I2C_CLIENT_END };
+static unsigned force[2] = { I2C_CLIENT_END , I2C_CLIENT_END };
+
+static struct i2c_client_address_data addr_data = {
+ normal_i2c , normal_i2c_range,
+ probe , probe_range,
+ ignore , ignore_range,
+ force
+};
+
+static struct i2c_client client_template;
+
 struct bt819 {
- struct i2c_bus *bus;
+ struct i2c_client *client;
         int addr;
         unsigned char reg[32];
 
@@ -59,6 +76,7 @@
         int contrast;
         int hue;
         int sat;
+ struct semaphore lock;
 };
 
 struct timing {
@@ -82,71 +100,17 @@
 
 /* ----------------------------------------------------------------------- */
 
-static int bt819_write(struct bt819 *dev, unsigned char subaddr,
- unsigned char data)
+static int bt819_probe(struct i2c_adapter *adap)
 {
- int ack;
-
- LOCK_I2C_BUS(dev->bus);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
- i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
- ack = i2c_sendbyte(dev->bus, data, I2C_DELAY);
- dev->reg[subaddr] = data;
- i2c_stop(dev->bus);
- UNLOCK_I2C_BUS(dev->bus);
- return ack;
+ return i2c_probe(adap, &addr_data, bt819_attach);
 }
 
 static int bt819_setbit(struct bt819 *dev, int subaddr, int bit, int data)
 {
- return bt819_write(dev, subaddr, (dev->reg[subaddr] & ~(1 << bit)) | (data ? (1 << bit) : 0));
-}
-
-static int bt819_write_block(struct bt819 *dev, unsigned const char *data,
- unsigned int len)
-{
- int ack;
- unsigned subaddr;
-
- ack = 0;
- while (len > 1) {
- LOCK_I2C_BUS(dev->bus);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
- ack = i2c_sendbyte(dev->bus, (subaddr = *data++), I2C_DELAY);
- ack = i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++),
- I2C_DELAY);
- len -= 2;
- while (len > 1 && *data == ++subaddr) {
- data++;
- ack =
- i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++), I2C_DELAY);
- len -= 2;
- }
- i2c_stop(dev->bus);
- UNLOCK_I2C_BUS(dev->bus);
- }
- return ack;
-}
-
-static int bt819_read(struct bt819 *dev, unsigned char subaddr)
-{
- int data;
-
- LOCK_I2C_BUS(dev->bus);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
- i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr | 1, I2C_DELAY);
- data = i2c_readbyte(dev->bus, 1);
- i2c_stop(dev->bus);
- UNLOCK_I2C_BUS(dev->bus);
- return data;
+ return i2c_smbus_write_byte_data(dev->client, subaddr, (dev->reg[subaddr] & ~(1 << bit)) | (data ? (1 << bit) : 0));
 }
 
-static int bt819_init(struct i2c_device *device)
+static int bt819_init(struct i2c_client *client)
 {
         struct bt819 *decoder;
 
@@ -178,7 +142,7 @@
 
         struct timing *timing;
 
- decoder = device->data;
+ decoder = client->data;
         timing = &timing_data[decoder->norm];
 
         init[3 * 2 - 1] = (((timing->vdelay >> 8) & 0x03) << 6) |
@@ -192,31 +156,38 @@
         init[8 * 2 - 1] = timing->hscale >> 8;
         init[9 * 2 - 1] = timing->hscale & 0xff;
 
- bt819_write(decoder, 0x1f, 0x00);
+ i2c_smbus_write_byte_data(client, 0x1f, 0x00);
         mdelay(1);
- return bt819_write_block(decoder, init, sizeof(init));
+ return i2c_master_send(client, init, sizeof(init));
 
 }
 
 /* ----------------------------------------------------------------------- */
 
-static int bt819_attach(struct i2c_device *device)
+static int bt819_attach(struct i2c_adapter *adap, int addr , unsigned long flags, int kind)
 {
         int i;
         struct bt819 *decoder;
+ struct i2c_client *client;
 
- MOD_INC_USE_COUNT;
-
- device->data = decoder = kmalloc(sizeof(struct bt819), GFP_KERNEL);
+ client = kmalloc(sizeof(*client), GFP_KERNEL);
+ if(client == NULL)
+ return -ENOMEM;
+ client_template.adapter = adap;
+ client_template.addr = addr;
+ memcpy(client, &client_template, sizeof(*client));
+
+ decoder = kmalloc(sizeof(struct bt819), GFP_KERNEL);
         if (decoder == NULL) {
                 MOD_DEC_USE_COUNT;
                 return -ENOMEM;
         }
 
         memset(decoder, 0, sizeof(struct bt819));
- strcpy(device->name, "bt819");
- decoder->bus = device->bus;
- decoder->addr = device->addr;
+ strcpy(client->name, "bt819");
+ client->data = decoder;
+ decoder->client = client;
+ decoder->addr = addr;
         decoder->norm = VIDEO_MODE_NTSC;
         decoder->input = 0;
         decoder->enable = 1;
@@ -226,34 +197,39 @@
         decoder->sat = 32768;
         decoder->initialized = 0;
 
- i = bt819_init(device);
+ i = bt819_init(client);
         if (i < 0) {
                 printk(KERN_ERR "%s: bt819_attach: init status %d\n",
- decoder->bus->name, i);
+ decoder->client->name, i);
         } else {
                 printk(KERN_INFO "%s: bt819_attach: chip version %x\n",
- decoder->bus->name, bt819_read(decoder,
+ decoder->client->name, i2c_smbus_read_byte_data(client,
                                                       0x17) & 0x0f);
         }
+ init_MUTEX(&decoder->lock);
+ i2c_attach_client(client);
+ MOD_INC_USE_COUNT;
         return 0;
 }
 
-static int bt819_detach(struct i2c_device *device)
+static int bt819_detach(struct i2c_client *client)
 {
- kfree(device->data);
+ i2c_detach_client(client);
+ kfree(client->data);
+ kfree(client);
         MOD_DEC_USE_COUNT;
         return 0;
 }
 
-static int bt819_command(struct i2c_device *device, unsigned int cmd, void *arg)
+static int bt819_command(struct i2c_client *client, unsigned int cmd, void *arg)
 {
         int temp;
 
- struct bt819 *decoder = device->data;
+ struct bt819 *decoder = client->data;
         //return 0;
 
         if (!decoder->initialized) { // First call to bt819_init could be
- bt819_init(device); // without #FRST = 0
+ bt819_init(client); // without #FRST = 0
                 decoder->initialized = 1;
         }
 
@@ -277,7 +253,7 @@
                         int status;
                         int res;
 
- status = bt819_read(decoder, 0x00);
+ status = i2c_smbus_read_byte_data(client, 0x00);
                         res = 0;
                         if ((status & 0x80)) {
                                 res |= DECODER_STATUS_GOOD;
@@ -302,7 +278,7 @@
                         *iarg = res;
 
                         DEBUG(printk(KERN_INFO "%s-bt819: get status %x\n",
- decoder->bus->name, *iarg));
+ decoder->client->name, *iarg));
                 }
                 break;
 
@@ -312,37 +288,38 @@
                         struct timing *timing;
 
                         DEBUG(printk(KERN_INFO "%s-bt819: set norm %x\n",
- decoder->bus->name, *iarg));
+ decoder->client->name, *iarg));
 
                         if (*iarg == VIDEO_MODE_NTSC) {
                                 bt819_setbit(decoder, 0x01, 0, 1);
                                 bt819_setbit(decoder, 0x01, 1, 0);
- bt819_write(decoder, 0x18, 0x68);
- bt819_write(decoder, 0x19, 0x5d);
+ i2c_smbus_write_byte_data(client, 0x18, 0x68);
+ i2c_smbus_write_byte_data(client, 0x19, 0x5d);
                                 //bt819_setbit(decoder, 0x1a, 5, 1);
                                 timing = &timing_data[VIDEO_MODE_NTSC];
                         } else {
                                 bt819_setbit(decoder, 0x01, 0, 1);
                                 bt819_setbit(decoder, 0x01, 1, 1);
- bt819_write(decoder, 0x18, 0x7f);
- bt819_write(decoder, 0x19, 0x72);
+ i2c_smbus_write_byte_data(client, 0x18, 0x7f);
+ i2c_smbus_write_byte_data(client, 0x19, 0x72);
                                 //bt819_setbit(decoder, 0x1a, 5, 0);
                                 timing = &timing_data[VIDEO_MODE_PAL];
                         }
 
- bt819_write(decoder, 0x03,
+ i2c_smbus_write_byte_data(client, 0x03,
                                     (((timing->vdelay >> 8) & 0x03) << 6) |
                                     (((timing->
                                        vactive >> 8) & 0x03) << 4) |
                                     (((timing->
                                        hdelay >> 8) & 0x03) << 2) |
                                     ((timing->hactive >> 8) & 0x03));
- bt819_write(decoder, 0x04, timing->vdelay & 0xff);
- bt819_write(decoder, 0x05, timing->vactive & 0xff);
- bt819_write(decoder, 0x06, timing->hdelay & 0xff);
- bt819_write(decoder, 0x07, timing->hactive & 0xff);
- bt819_write(decoder, 0x08, timing->hscale >> 8);
- bt819_write(decoder, 0x09, timing->hscale & 0xff);
+
+ i2c_smbus_write_byte_data(client, 0x04, timing->vdelay & 0xff);
+ i2c_smbus_write_byte_data(client, 0x05, timing->vactive & 0xff);
+ i2c_smbus_write_byte_data(client, 0x06, timing->hdelay & 0xff);
+ i2c_smbus_write_byte_data(client, 0x07, timing->hactive & 0xff);
+ i2c_smbus_write_byte_data(client, 0x08, timing->hscale >> 8);
+ i2c_smbus_write_byte_data(client, 0x09, timing->hscale & 0xff);
                         decoder->norm = *iarg;
                 }
                 break;
@@ -352,7 +329,7 @@
                         int *iarg = arg;
 
                         DEBUG(printk(KERN_INFO "%s-bt819: set input %x\n",
- decoder->bus->name, *iarg));
+ decoder->client->name, *iarg));
 
                         if (*iarg < 0 || *iarg > 7) {
                                 return -EINVAL;
@@ -377,7 +354,7 @@
                         int *iarg = arg;
 
                         DEBUG(printk(KERN_INFO "%s-bt819: set output %x\n",
- decoder->bus->name, *iarg));
+ decoder->client->name, *iarg));
 
                         /* not much choice of outputs */
                         if (*iarg != 0) {
@@ -393,7 +370,7 @@
 
                         DEBUG(printk
                               (KERN_INFO "%s-bt819: enable output %x\n",
- decoder->bus->name, *iarg));
+ decoder->client->name, *iarg));
 
                         if (decoder->enable != enable) {
                                 decoder->enable = enable;
@@ -414,21 +391,21 @@
                         DEBUG(printk
                               (KERN_INFO
                                "%s-bt819: set picture brightness %d contrast %d colour %d\n",
- decoder->bus->name, pic->brightness,
+ decoder->client->name, pic->brightness,
                                pic->contrast, pic->colour));
 
 
                         if (decoder->bright != pic->brightness) {
                                 /* We want -128 to 127 we get 0-65535 */
                                 decoder->bright = pic->brightness;
- bt819_write(decoder, 0x0a,
+ i2c_smbus_write_byte_data(client, 0x0a,
                                             (decoder->bright >> 8) - 128);
                         }
 
                         if (decoder->contrast != pic->contrast) {
                                 /* We want 0 to 511 we get 0-65535 */
                                 decoder->contrast = pic->contrast;
- bt819_write(decoder, 0x0c,
+ i2c_smbus_write_byte_data(client, 0x0c,
                                             (decoder->
                                              contrast >> 7) & 0xff);
                                 bt819_setbit(decoder, 0x0b, 2,
@@ -439,14 +416,14 @@
                         if (decoder->sat != pic->colour) {
                                 /* We want 0 to 511 we get 0-65535 */
                                 decoder->sat = pic->colour;
- bt819_write(decoder, 0x0d,
+ i2c_smbus_write_byte_data(client, 0x0d,
                                             (decoder->sat >> 7) & 0xff);
                                 bt819_setbit(decoder, 0x0b, 1,
                                              ((decoder->
                                                sat >> 15) & 0x01));
 
                                 temp = (decoder->sat * 201) / 237;
- bt819_write(decoder, 0x0e,
+ i2c_smbus_write_byte_data(client, 0x0e,
                                             (temp >> 7) & 0xff);
                                 bt819_setbit(decoder, 0x0b, 0,
                                              (temp >> 15) & 0x01);
@@ -455,7 +432,7 @@
                         if (decoder->hue != pic->hue) {
                                 /* We want -128 to 127 we get 0-65535 */
                                 decoder->hue = pic->hue;
- bt819_write(decoder, 0x0f,
+ i2c_smbus_write_byte_data(client, 0x0f,
                                             128 - (decoder->hue >> 8));
                         }
                 }
@@ -472,22 +449,30 @@
 
 static struct i2c_driver i2c_driver_bt819 = {
         "bt819", /* name */
- I2C_DRIVERID_VIDEODECODER, /* ID */
- I2C_BT819, I2C_BT819 + 1,
-
- bt819_attach,
+ I2C_DRIVERID_BT819, /* ID */
+ I2C_DF_NOTIFY,
+ bt819_probe,
         bt819_detach,
         bt819_command
 };
 
+static struct i2c_client client_template = {
+ "bt819_client",
+ -1,
+ 0,
+ 0,
+ NULL,
+ &i2c_driver_bt819
+};
+
 static int bt819_setup(void)
 {
- return i2c_register_driver(&i2c_driver_bt819);
+ return i2c_add_driver(&i2c_driver_bt819);
 }
 
 static void bt819_exit(void)
 {
- i2c_unregister_driver(&i2c_driver_bt819);
+ i2c_del_driver(&i2c_driver_bt819);
 }
 
 module_init(bt819_setup);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sat Aug 31 2002 - 22:00:21 EST