On Tue, Aug 27, 2002 at 08:22:03PM +0200, Steffen Persvold wrote:
> I have an idea that this happens because the packets are comming out of
> order into the receiving node (i.e the bonding device is alternating
> between each interface when sending, and when the receiving node gets the
> packets it is possible that the first interface get packets number 0, 2,
> 4 and 6 in one interrupt and queues it to the network stack before packet
> 1, 3, 5 is handled on the other interface).
You pointed your finger on this exact common problem.
You can use the XOR bonding mode (modprobe bonding mode=2), which uses a
hash of mac addresses to select the outgoing interface. This is interesting
if you have lots of L2 hosts on the same network switch.
Or if you have a few hosts on the same switch, you'd better use the "nexthop"
parameter of "ip route". IIRC, it should be something like :
ip route add <destination> nexthop dev eth0 nexthop dev eth1
but read the help, I'm not certain.
Cheers,
Willy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Aug 31 2002 - 22:00:20 EST