Hello
i have a reproducible system freeze using SuSE 8.0 with original kernel 2.4.19
(same with SuSE 2.4.18 kernel).
Hardware:
Asus P2B-Dual with 2x PIII 700 MHz (Bios 1013 - current)
896 MB RAM
Promise PDC20267 off board IDE Controller (current bios release)
aic7880 scsi-controller for CD-writers
nvidia graphic card
RTL-8139A based network card
/dev/hda: _NEC DV-5700B DVD-ROM on piix onboard controller, ide0
/dev/hdc: IBM IC35L060AVVA07-0 on PDC20267 ide1
/dev/hdd: IBM IC35L080AVVA07-0 on PDC20267 ide1
/dev/hde: IBM IC35L060AVVA07-0 on PDC20267 ide2
So far I have had a complete system freeze once a month, but now i started the
oracle installer and then this freeze happens within a minute during
installation and can be reproduced. But the freeze does not always happen
exactly at the same action. The system gets unstable first, so that for
example a bash gets a "segementation violation". But then some seconds later
the system will freeze and i have to power off.
I tried the following:
- run memtest86, everything OK
- stopped most of the other services
- started oracle installation from a remote X server, so that there is no
XFree running on the SMP-mashine, only xdm without local X-server
- tried boot parameter "idex=serialize"
- tried ext3 and reiserfs as file system for the installation target partition
=> no changes, the system still freezes.
I haven't done any kernel programming so far, but i would be able to give more
input, if someone has an idea what to do.
Holger Grosenick
partititions:
(The oracle installer copies data from hdc11 / reiser to hdd1 / ext3)
-------------------------------------------------------------
major minor #blocks name
33 0 60051600 hde
33 1 30208 hde1
33 2 8192016 hde2
33 3 660744 hde3
33 4 1 hde4
33 5 1570936 hde5
33 6 1032664 hde6
33 7 3584416 hde7
33 8 4608040 hde8
33 9 5120104 hde9
33 10 1024096 hde10
33 11 34228120 hde11
22 0 60051600 hdc
22 1 30208 hdc1
22 2 8192016 hdc2
22 3 660744 hdc3
22 4 1 hdc4
22 5 1570936 hdc5
22 6 1032664 hdc6
22 7 3584416 hdc7
22 8 4608040 hdc8
22 9 5120104 hdc9
22 10 1024096 hdc10
22 11 34228120 hdc11
22 64 80418240 hdd
22 65 80418208 hdd1
interrups
-----------------------------------------------------------
CPU0 CPU1
0: 147718 151530 IO-APIC-edge timer
1: 2646 2683 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
4: 26150 26083 IO-APIC-edge serial
5: 1662 1359 IO-APIC-edge SoundBlaster
11: 14748 14638 IO-APIC-level ide1, ide2, usb-uhci
12: 171 165 IO-APIC-level aic7xxx
14: 4 2 IO-APIC-edge ide0
15: 5609 5383 IO-APIC-level eth0
NMI: 0 0
LOC: 299187 299066
ERR: 0
MIS: 0
lspci -vvv
-----------------------------------------------------------
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev
03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >
SERR- <PERR-
Latency: 64
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev
03) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+
FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: e0000000-e1dfffff
Prefetchable memory behind bridge: e1f00000-e3ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 0
00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if
80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 0
Region 4: I/O ports at d800 [size=16]
00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if
00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d400 [size=32]
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:09.0 Unknown mass storage controller: Promise Technology, Inc. 20267 (rev
02)
Subsystem: Promise Technology, Inc. Ultra100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b400 [size=8]
Region 3: I/O ports at b000 [size=4]
Region 4: I/O ports at a800 [size=64]
Region 5: Memory at df800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [58] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at a400 [size=256]
Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=256]
00:0b.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at a000 [disabled] [size=256]
Region 1: Memory at de800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15)
(prog-if 00 [VGA]
)
Subsystem: Elsa AG: Unknown device 0c3a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR-
FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >
SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at e1ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
module-list, all compiled for the current kernel release,
no high memory support
---------------------------------------------------------------
snd-pcm-oss 35364 0 (autoclean)
snd-mixer-oss 9312 1 (autoclean)
snd-seq-midi 3168 0 (autoclean) (unused)
snd-emu8000-synth 4804 0 (autoclean)
snd-emux-synth 24064 0 (autoclean) [snd-emu8000-synth]
snd-seq-virmidi 2664 0 (autoclean) [snd-emux-synth]
snd-util-mem 1088 0 (autoclean) [snd-emu8000-synth
snd-emux-synth]
snd-seq-oss 24896 0 (autoclean)
snd-seq-midi-event 2744 0 (autoclean) [snd-seq-midi snd-seq-virmidi
snd-seq-oss]
snd-opl3-synth 8732 0
snd-seq-instr 4608 0 [snd-opl3-synth]
snd-seq-midi-emul 4192 0 [snd-emux-synth snd-opl3-synth]
snd-seq 39500 2 [snd-seq-midi snd-emux-synth snd-seq-virmidi
snd-seq-oss snd-seq-midi-event snd-opl3-synth snd-seq-instr
snd-seq-midi-emul]
snd-ainstr-fm 1460 0 [snd-opl3-synth]
snd-sbawe 16096 1 [snd-emu8000-synth]
snd-sb16-dsp 5888 0 [snd-sbawe]
snd-pcm 46816 0 [snd-pcm-oss snd-sb16-dsp]
snd-sb16-csp 15776 0 [snd-sbawe]
snd-sb-common 6248 0 [snd-sbawe snd-sb16-dsp snd-sb16-csp]
snd-opl3-lib 5408 0 [snd-opl3-synth snd-sbawe]
snd-hwdep 3648 0 [snd-sb16-csp snd-opl3-lib]
snd-timer 10496 0 [snd-seq snd-pcm snd-opl3-lib]
snd-mpu401-uart 2864 0 [snd-sbawe snd-sb16-dsp]
snd-rawmidi 12288 0 [snd-seq-midi snd-seq-virmidi
snd-mpu401-uart]
snd-seq-device 3952 0 [snd-seq-midi snd-emu8000-synth
snd-emux-synth snd-seq-oss snd-opl3-synth snd-seq snd-sbawe snd-opl3-lib
snd-rawmidi]
snd 25224 0 [snd-pcm-oss snd-mixer-oss snd-seq-midi
snd-emu8000-synth snd-emux-synth snd-seq-virmidi snd-util-mem snd-seq-oss
snd-seq-midi-event snd-opl3-synth snd-seq-instr snd-seq snd-sbawe
snd-sb16-dsp snd-pcm snd-sb16-csp snd-sb-common snd-opl3-lib snd-hwdep
snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 3396 10 [snd]
isa-pnp 27580 0 [snd-sbawe]
sr_mod 12888 0 (autoclean)
sg 25156 0 (autoclean)
uhci 24968 0 (unused)
usbcore 55296 1 [uhci]
8139too 13984 1
reiserfs 157504 1 (autoclean)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Aug 31 2002 - 22:00:16 EST