>matt@ecsc.co.uk wrote:
>I experienced problems with the sundance on the dfe580tx a while back
>too, and I made a patch for 2.4.18 a while back (it on my site (in the
>sig)), donald becker then released v1.08 on his site a while back
>(www.scyld.com) which fixed the problem (my patch now includes this).
>Please apply this patch and try again, (or try db's original version).
>Fyi, the dfe580tx doesn't support mii-diag afaik. The best error check
>was to check the output of ifconfig and see whether the RX bytes
>equalled the TX bytes (unless running lo, these shouldn't be the same,
>and they were the first time I had a problem).
>Hope this helps,
>Matt
>On Wed, 2002-08-14 at 18:37, Holger.Woehle@arcor.net wrote:
> Hello,
> i have a strange problem with two of my machines:
> They are identical P4 systems with Intel Chipset with two epro100 adapters
> onboard and a d-link dfe-580TX quad ethernet card.
> I am using Kernel 2.4.18 and sundance.o v1.07a 7/9/2002.
Hello,
i used the new V1.09 driver but nothing changed.
I have the suspicion that i run into a irq problem with the D-LINK being a
PCI-PCI bridge.
Can that be the reason ?
# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 4).
Prefetchable 32 bit memory at 0xe4000000 [0xe43fffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 4).
Master Capable. Latency=64. Min Gnt=6.
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 5).
Master Capable. No bursts. Min Gnt=14.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev
5).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 5).
I/O at 0xf000 [0xf00f].
Bus 0, device 31, function 2:
USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev
5).
IRQ 5.
I/O at 0xb000 [0xb01f].
Bus 0, device 31, function 3:
SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 5).
IRQ 3.
I/O at 0x500 [0x50f].
Bus 0, device 31, function 4:
USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B) (rev
5).
IRQ 11.
I/O at 0xb800 [0xb81f].
Bus 2, device 1, function 0:
PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 3).
Master Capable. Latency=32. Min Gnt=6.
Bus 2, device 6, function 0:
Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 8).
IRQ 11.
Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xe3200000 [0xe3200fff].
I/O at 0xa000 [0xa03f].
Non-prefetchable 32 bit memory at 0xe3100000 [0xe31fffff].
Bus 2, device 7, function 0:
Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (#2) (rev 8).
IRQ 9.
Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0xe3201000 [0xe3201fff].
I/O at 0xa400 [0xa43f].
Non-prefetchable 32 bit memory at 0xe3000000 [0xe30fffff].
Bus 2, device 8, function 0:
VGA compatible controller: ATI Technologies Inc Rage XL (rev 39).
IRQ 9.
Master Capable. Latency=32. Min Gnt=8.
Non-prefetchable 32 bit memory at 0xe2000000 [0xe2ffffff].
I/O at 0xa800 [0xa8ff].
Non-prefetchable 32 bit memory at 0xe3202000 [0xe3202fff].
Bus 3, device 4, function 0:
Ethernet controller: D-Link System Inc Sundance Ethernet (rev 18).
IRQ 3.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0x9000 [0x907f].
Bus 3, device 5, function 0:
Ethernet controller: D-Link System Inc Sundance Ethernet (#2) (rev 18).
IRQ 7.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0x9400 [0x947f].
Bus 3, device 6, function 0:
Ethernet controller: D-Link System Inc Sundance Ethernet (#3) (rev 18).
IRQ 5.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0x9800 [0x987f].
Bus 3, device 7, function 0:
Ethernet controller: D-Link System Inc Sundance Ethernet (#4) (rev 18).
IRQ 10.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0x9c00 [0x9c7f].
# pci-config
pci-config.c:v2.02 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Device #1 at bus 0 device/function 0/0, 1a308086.
Device #2 at bus 0 device/function 1/0, 1a318086.
Device #3 at bus 0 device/function 30/0, 244e8086.
Device #4 at bus 0 device/function 31/0, 24408086.
Device #5 at bus 0 device/function 31/1, 244b8086.
Device #6 at bus 0 device/function 31/2, 24428086.
Device #7 at bus 0 device/function 31/3, 24438086.
Device #8 at bus 0 device/function 31/4, 24448086.
with regards
Holger
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:39 EST