[PATCH][RESEND] CPUFreq core for 2.5.31

From: Dominik Brodowski (devel@brodo.de)
Date: Tue Aug 13 2002 - 04:38:24 EST


Linus, lkml,

The following patch adds the cpufreq core code to 2.5.31. The
cpufreq core offers a common interface to the CPU clock speed
features of both ARM and x86 CPUs.

For communication with user space, sysctl entries are placed in
/proc/sys/cpu/{0,1,...,NR_CPUS-1}/ . Entries provided are:

        speed-min (readonly)
        speed-max (readonly)
        speed-sync (readonly - all CPUs need the same frequency,
                               changes affect all CPUs)
        speed (read/write)

In order for this code to be built, an architecture must define the
CONFIG_CPU_FREQ configuration symbol. The merged ARM code already
has the necessary configuration in place; the x86 part will be sent
later with the x86 specific patch.

Specifically on ARM CPUs, the core is especially important, since
various ARM system on a chip implementations derive peripheral clocks
from the CPU clock (eg, LCD controllers, SDRAM controllers, etc).
The core allows these peripherals to take action either prior and/or
after the actual CPU clock adjustment so we don't go out of tolerance.

Comments welcome; however please ensure that the cpufreq development
list at cpufreq@www.linux.org.uk receives a copy of all comments.

  Dominik

--- linux/kernel/Makefile.orig Sun Jul 28 22:38:14 2002
+++ linux/kernel/Makefile Sun Jul 28 22:38:44 2002
@@ -10,7 +10,7 @@
 O_TARGET := kernel.o
 
 export-objs = signal.o sys.o kmod.o context.o ksyms.o pm.o exec_domain.o \
- printk.o platform.o suspend.o dma.o
+ printk.o platform.o suspend.o dma.o cpufreq.o
 
 obj-y = sched.o fork.o exec_domain.o panic.o printk.o \
             module.o exit.o itimer.o time.o softirq.o resource.o \
@@ -22,6 +22,7 @@
 obj-$(CONFIG_UID16) += uid16.o
 obj-$(CONFIG_MODULES) += ksyms.o
 obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
 obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
 obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
 
--- /dev/null Sat May 12 19:23:16 2001
+++ linux/kernel/cpufreq.c Fri Jul 19 00:23:31 2002
@@ -0,0 +1,723 @@
+/*
+ * linux/kernel/cpufreq.c
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2002 Dominik Brodowski <devel@brodo.de>
+ *
+ * $Id: cpufreq.c,v 1.32 2002/07/18 22:23:31 db Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * CPU speed changing core functionality. We provide the following
+ * services to the system:
+ * - notifier lists to inform other code of the freq change both
+ * before and after the freq change.
+ * - the ability to change the freq speed
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/cpufreq.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/sysctl.h>
+#include <linux/slab.h>
+
+#include <asm/semaphore.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <linux/interrupt.h> /* requires system.h */
+
+
+/*
+ * This list is for kernel code that needs to handle
+ * changes to devices when the CPU clock speed changes.
+ */
+static struct notifier_block *cpufreq_notifier_list;
+static DECLARE_MUTEX (cpufreq_notifier_sem);
+
+/*
+ * This is internal information about the actual transition
+ * driver.
+ */
+static struct cpufreq_driver *cpufreq_driver;
+static struct cpufreq_freqs cpufreq_freq_limit;
+static DECLARE_MUTEX (cpufreq_driver_sem);
+
+/*
+ * Some data for the CPUFreq core - loops_per_jiffy / frequency values at boot
+ */
+static unsigned long cpufreq_ref_loops;
+static unsigned int cpufreq_ref_freq;
+
+
+
+/**
+ * scale - "old * mult / div" calculation for large values (32-bit-arch safe)
+ * @old: old value
+ * @div: divisor
+ * @mult: multiplier
+ *
+ * Needed for loops_per_jiffy calculation. We do it this way to
+ * avoid math overflow on 32-bit machines. Maybe we should make
+ * this architecture dependent? If you have a better way of doing
+ * this, please replace!
+ *
+ * new = old * mult / div
+ */
+static unsigned long scale(unsigned long old, u_int div, u_int mult)
+{
+ unsigned long low_part, high_part;
+
+ high_part = old / div;
+ low_part = (old % div) / 100;
+ high_part *= mult;
+ low_part = low_part * mult / div;
+
+ return high_part + low_part * 100;
+}
+
+
+/**
+ * cpufreq_setup - cpufreq command line parameter parsing
+ *
+ * cpufreq command line parameter. Use:
+ * cpufreq=59000-221000
+ * to set the CPU frequency to 59 to 221MHz.
+ */
+static int __init cpufreq_setup(char *str)
+{
+ unsigned int min, max;
+
+ min = 0;
+ max = simple_strtoul(str, &str, 0);
+ if (*str == '-') {
+ min = max;
+ max = simple_strtoul(str + 1, NULL, 0);
+ }
+
+ down(&cpufreq_driver_sem);
+ cpufreq_freq_limit.max = max;
+ cpufreq_freq_limit.min = min;
+ up(&cpufreq_driver_sem);
+
+ return 1;
+}
+__setup("cpufreq=", cpufreq_setup);
+
+
+/**
+ * adjust_jiffies - adjust the system "loops_per_jiffy"
+ *
+ * This function alters the system "loops_per_jiffy" for the clock
+ * speed change. We ignore CPUFREQ_DRIVER.MINMAX here.
+ */
+static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
+{
+ if ((val == CPUFREQ_PRECHANGE && ci->cur < ci->new) ||
+ (val == CPUFREQ_POSTCHANGE && ci->cur > ci->new))
+ loops_per_jiffy = scale(cpufreq_ref_loops, cpufreq_ref_freq,
+ ci->new);
+}
+
+
+
+/*********************************************************************
+ * NOTIFIER LIST INTERFACE *
+ *********************************************************************/
+
+
+/**
+ * cpufreq_register_notifier - register a driver with cpufreq
+ * @nb: notifier function to register
+ *
+ * Add a driver to the list of drivers that which to be notified about
+ * CPU clock rate changes. The driver will be called three times on
+ * clock change.
+ *
+ * This function may sleep, and has the same return conditions as
+ * notifier_chain_register.
+ */
+int cpufreq_register_notifier(struct notifier_block *nb)
+{
+ int ret;
+
+ down(&cpufreq_notifier_sem);
+ ret = notifier_chain_register(&cpufreq_notifier_list, nb);
+ up(&cpufreq_notifier_sem);
+
+ return ret;
+}
+EXPORT_SYMBOL(cpufreq_register_notifier);
+
+
+/**
+ * cpufreq_unregister_notifier - unregister a driver with cpufreq
+ * @nb: notifier block to be unregistered
+ *
+ * Remove a driver from the CPU frequency notifier lists.
+ *
+ * This function may sleep, and has the same return conditions as
+ * notifier_chain_unregister.
+ */
+int cpufreq_unregister_notifier(struct notifier_block *nb)
+{
+ int ret;
+
+ down(&cpufreq_notifier_sem);
+ ret = notifier_chain_unregister(&cpufreq_notifier_list, nb);
+ up(&cpufreq_notifier_sem);
+
+ return ret;
+}
+EXPORT_SYMBOL(cpufreq_unregister_notifier);
+
+
+
+/*********************************************************************
+ * GET / SET PROCESSOR SPEED *
+ *********************************************************************/
+
+/**
+ * cpu_setfreq - change the CPU clock frequency.
+ * @freq: frequency (in kHz) at which we should run.
+ *
+ * Set the CPU clock frequency, informing all registered users of
+ * the change. We bound the frequency according to the cpufreq
+ * command line parameter, information obtained from the cpufreq
+ * driver, and the parameters the registered users will allow.
+ *
+ * This function must be called from process context.
+ *
+ * We return 0 if successful, -EINVAL if no CPUFreq architecture
+ * driver is registered, and -ENXIO if the driver is invalid.
+ */
+int cpufreq_set(unsigned int cpu, unsigned int freq)
+{
+ struct cpufreq_freqs cpufreq;
+ int ret;
+
+ if (in_interrupt())
+ panic("cpufreq_set() called from interrupt context!");
+
+ down(&cpufreq_driver_sem);
+ down(&cpufreq_notifier_sem);
+
+ if (!cpufreq_driver) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = -ENXIO;
+ if (!cpufreq_driver->setspeed || !cpufreq_driver->validate)
+ goto out;
+
+ /*
+ * Don't allow the CPU to be clocked over the limit.
+ */
+ if (cpufreq_driver->sync) {
+ cpufreq.cpu = CPUFREQ_ALL_CPUS;
+ cpu = 0;
+ } else {
+ if (cpu >= NR_CPUS) {
+ ret = -EINVAL;
+ goto out;
+ }
+ cpufreq.cpu = cpu;
+ }
+ cpufreq.min = cpufreq_driver->freq[cpu].min;
+ cpufreq.max = cpufreq_driver->freq[cpu].max;
+ cpufreq.cur = cpufreq_driver->freq[cpu].cur;
+ cpufreq.new = freq;
+
+
+ /*
+ * Find out what the registered devices will currently tolerate,
+ * and limit the requested clock rate to these values. Drivers
+ * must not rely on the 'new' value - it is only a guide.
+ */
+ notifier_call_chain(&cpufreq_notifier_list, CPUFREQ_MINMAX, &cpufreq);
+
+ if (freq < cpufreq.min)
+ freq = cpufreq.min;
+ if (freq > cpufreq.max)
+ freq = cpufreq.max;
+
+ /*
+ * Ask the CPU specific code to validate the speed. If the speed
+ * is not acceptable, make it acceptable. Current policy is to
+ * round the frequency down to the value the processor actually
+ * supports.
+ */
+ freq = cpufreq_driver->validate(cpu, freq);
+
+ if (cpufreq_driver->freq[cpu].cur != freq) {
+ cpufreq.cur = cpufreq_driver->freq[cpu].cur;
+ cpufreq.new = freq;
+
+ notifier_call_chain(&cpufreq_notifier_list, CPUFREQ_PRECHANGE,
+ &cpufreq);
+
+ if (cpufreq_driver->sync)
+ adjust_jiffies(CPUFREQ_PRECHANGE, &cpufreq);
+ else
+ BUG();
+
+ /*
+ * Actually set the CPU frequency.
+ */
+ preempt_disable();
+ cpufreq_driver->setspeed(cpu, freq);
+ preempt_enable();
+ cpufreq_driver->freq[cpu].cur = freq;
+ adjust_jiffies(CPUFREQ_POSTCHANGE, &cpufreq);
+
+ notifier_call_chain(&cpufreq_notifier_list, CPUFREQ_POSTCHANGE,
+ &cpufreq);
+
+ ret = 0;
+ }
+
+ out:
+ up(&cpufreq_notifier_sem);
+ up(&cpufreq_driver_sem);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_set);
+
+
+/**
+ * cpufreq_setmax - set the CPU to maximum frequency
+ * @cpu: the CPU affected by this call
+ *
+ * Sets the CPUs to maximum frequency.
+ */
+int cpufreq_setmax(unsigned int cpu)
+{
+ unsigned int max_freq = 0;
+
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return -EINVAL;
+ }
+ if (cpufreq_driver->sync)
+ max_freq = cpufreq_driver->freq->max;
+ else if (cpu < NR_CPUS)
+ max_freq = cpufreq_driver->freq[cpu].max;
+
+ up(&cpufreq_driver_sem);
+ return cpufreq_set(cpu, max_freq);
+}
+EXPORT_SYMBOL_GPL(cpufreq_setmax);
+
+
+/**
+ * cpufreq_get - get the CPU frequency in kHz (zero means failure)
+ * @cpu: number of the CPU this inquiry is made for
+ *
+ * Returns the CPU frequency in kHz or zero on failure.
+ */
+unsigned int cpufreq_get(unsigned int cpu)
+{
+ unsigned int current_freq = 0;
+
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return 0;
+ }
+
+ if (cpufreq_driver->sync)
+ current_freq = cpufreq_driver->freq->cur;
+ else if (cpu < NR_CPUS)
+ current_freq = cpufreq_driver->freq[cpu].max;
+
+ up(&cpufreq_driver_sem);
+ return current_freq;
+}
+EXPORT_SYMBOL(cpufreq_get);
+
+
+#ifdef CONFIG_PM
+/**
+ * cpufreq_restore - restore the CPU clock frequency after resume
+ *
+ * Restore the CPU clock frequency so that our idea of the current
+ * frequency reflects the actual hardware.
+ */
+int cpufreq_restore(void)
+{
+ int ret = 0;
+
+ if (in_interrupt())
+ panic("cpufreq_restore() called from interrupt context!");
+
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return -EINVAL;
+ }
+ ret = -ENXIO;
+ if (cpufreq_driver->setspeed) {
+ if (cpufreq_driver->sync)
+ cpufreq_driver->setspeed(0, cpufreq_driver->freq->cur);
+ else {
+ int i;
+ for (i=0; i < NR_CPUS; i++)
+ cpufreq_driver->setspeed(i, cpufreq_driver->freq[i].cur);
+ }
+ ret = 0;
+ }
+
+ up(&cpufreq_driver_sem);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_restore);
+#endif
+
+
+
+/*********************************************************************
+ * SYSCTL INTERFACE *
+ *********************************************************************/
+
+#ifdef CONFIG_SYSCTL
+
+struct ctl_table_header *cpufreq_sysctl_table;
+
+int
+cpufreq_procctl_min(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp)
+{
+ char buf[16];
+ int len, left = *lenp;
+ unsigned int printout = -1;
+
+ if (!left || write || filp->f_pos) {
+ *lenp = 0;
+ return 0;
+ }
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver)
+ printout = cpufreq_freq_limit.min;
+ else {
+ if (cpufreq_driver->sync)
+ printout = cpufreq_driver->freq->min;
+ else if (((int) ctl->extra1) < NR_CPUS)
+ printout = cpufreq_driver->freq[(int) ctl->extra1].min;
+ }
+ up(&cpufreq_driver_sem);
+
+ len = sprintf(buf, "%d\n", printout);
+ if (len > left)
+ len = left;
+ if (copy_to_user(buffer, buf, len))
+ return -EFAULT;
+
+ *lenp = len;
+ filp->f_pos += len;
+ return 0;
+}
+
+
+int
+cpufreq_procctl_max(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp)
+{
+ char buf[16];
+ int len, left = *lenp;
+ unsigned int printout = -1;
+
+ if (!left || write || filp->f_pos) {
+ *lenp = 0;
+ return 0;
+ }
+
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver)
+ printout = cpufreq_freq_limit.max;
+ else {
+ if (cpufreq_driver->sync)
+ printout = cpufreq_driver->freq->max;
+ else if (((int) ctl->extra1) < NR_CPUS)
+ printout = cpufreq_driver->freq[(int) ctl->extra1].max;
+ }
+ up(&cpufreq_driver_sem);
+
+ len = sprintf(buf, "%d\n", printout);
+ if (len > left)
+ len = left;
+ if (copy_to_user(buffer, buf, len))
+ return -EFAULT;
+
+ *lenp = len;
+ filp->f_pos += len;
+ return 0;
+}
+
+
+int
+cpufreq_procctl_sync(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp)
+{
+ char buf[16];
+ int len, left = *lenp;
+ unsigned int printout = 0;
+
+ if (!left || write || filp->f_pos) {
+ *lenp = 0;
+ return 0;
+ }
+
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver)
+ printout = -1;
+ else
+ printout = cpufreq_driver->sync;
+ up(&cpufreq_driver_sem);
+
+ len = sprintf(buf, "%d\n", printout);
+ if (len > left)
+ len = left;
+ if (copy_to_user(buffer, buf, len))
+ return -EFAULT;
+
+ *lenp = len;
+ filp->f_pos += len;
+ return 0;
+}
+
+
+int
+cpufreq_procctl(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp)
+{
+ char buf[16], *p;
+ int len, left = *lenp;
+ unsigned int cpu = 0;
+
+ if (!left || (filp->f_pos && !write)) {
+ *lenp = 0;
+ return 0;
+ }
+
+ if (write) {
+ unsigned int freq;
+
+ len = left;
+ if (left > sizeof(buf))
+ left = sizeof(buf);
+ if (copy_from_user(buf, buffer, left))
+ return -EFAULT;
+ buf[sizeof(buf) - 1] = '\0';
+
+ freq = simple_strtoul(buf, &p, 0);
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return -EINVAL;
+ }
+ if (cpufreq_driver->sync)
+ cpu = CPUFREQ_ALL_CPUS;
+ else
+ cpu = (int) ctl->extra1;
+ up(&cpufreq_driver_sem);
+ cpufreq_set(cpu, freq);
+ } else {
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return -EINVAL;
+ }
+ if (cpufreq_driver->sync)
+ cpu = CPUFREQ_ALL_CPUS;
+ else
+ cpu = (int) ctl->extra1;
+ up(&cpufreq_driver_sem);
+
+ len = sprintf(buf, "%d\n", cpufreq_get(cpu));
+ if (len > left)
+ len = left;
+ if (copy_to_user(buffer, buf, len))
+ return -EFAULT;
+ }
+
+ *lenp = len;
+ filp->f_pos += len;
+ return 0;
+}
+
+int
+cpufreq_sysctl(ctl_table *table, int *name, int nlen,
+ void *oldval, size_t *oldlenp,
+ void *newval, size_t newlen, void **context)
+{
+ unsigned int cpu = 0;
+
+ if (oldval && oldlenp) {
+ size_t oldlen;
+
+ if (get_user(oldlen, oldlenp))
+ return -EFAULT;
+
+ if (oldlen != sizeof(unsigned int))
+ return -EINVAL;
+
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return -EINVAL;
+ }
+ if (cpufreq_driver->sync)
+ cpu = CPUFREQ_ALL_CPUS;
+ else
+ cpu = (int) table->extra1;
+ up(&cpufreq_driver_sem);
+
+ if (put_user(cpufreq_get(cpu), (unsigned int *)oldval) ||
+ put_user(sizeof(unsigned int), oldlenp))
+ return -EFAULT;
+ }
+ if (newval && newlen) {
+ unsigned int freq;
+
+ if (newlen != sizeof(unsigned int))
+ return -EINVAL;
+
+ if (get_user(freq, (unsigned int *)newval))
+ return -EFAULT;
+
+ down(&cpufreq_driver_sem);
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return -EINVAL;
+ }
+ if (cpufreq_driver->sync)
+ cpu = CPUFREQ_ALL_CPUS;
+ else
+ cpu = (int) table->extra1;
+ up(&cpufreq_driver_sem);
+
+ cpufreq_set(cpu, freq);
+ }
+ return 1;
+}
+
+#endif
+
+
+
+
+/*********************************************************************
+ * REGISTER / UNREGISTER CPUFREQ DRIVER *
+ *********************************************************************/
+
+
+/**
+ * cpufreq_register - register a CPU Frequency driver
+ * @driver_data: A struct cpufreq_driver containing the values submitted by the CPU Frequency driver.
+ *
+ * driver_data should contain the following elements:
+ * freq.min is the minimum frequency the CPU / the CPUs can be set to
+ * (optional), freq.max is the maximum frequency (optional), freq.cur
+ * is the current frequency, validate points to a function returning
+ * the closest available CPU frequency, and setspeed points to a
+ * function performing the actual transition.
+ *
+ * All other variables are currently ignored.
+ *
+ *
+ * Registers a CPU Frequency driver to this core code. This code
+ * returns zero on success, -EBUSY when another driver got here first
+ * (and isn't unregistered in the meantime).
+ *
+ */
+int cpufreq_register(struct cpufreq_driver *driver_data)
+{
+ int i, j;
+
+ if (cpufreq_driver)
+ return -EBUSY;
+
+ if (!driver_data || !driver_data->freq)
+ return -EINVAL;
+
+ down(&cpufreq_driver_sem);
+
+ cpufreq_driver = driver_data;
+
+ /*
+ * If the user doesn't tell us the maximum frequency,
+ * or if it is invalid, use the values determined
+ * by the cpufreq-arch-specific initialization functions.
+ * The validatespeed code is responsible for limiting
+ * this further.
+ */
+
+ if (cpufreq_driver->sync)
+ j = 1;
+ else
+ j = NR_CPUS;
+ for (i=0; i<j; i++) {
+ if (!cpufreq_driver->freq[i].max ||
+ (cpufreq_freq_limit.max &&
+ (cpufreq_freq_limit.max < cpufreq_driver->freq[i].max)))
+ cpufreq_driver->freq[i].max = cpufreq_freq_limit.max;
+
+ if (!cpufreq_driver->freq[i].min ||
+ (cpufreq_driver->freq[i].min < cpufreq_freq_limit.min))
+ cpufreq_driver->freq[i].min = cpufreq_freq_limit.min;
+
+ if (cpufreq_driver->sync) {
+ cpufreq_ref_loops = loops_per_jiffy;
+ cpufreq_ref_freq = cpufreq_driver->freq->cur;
+ } else
+ BUG();
+ }
+
+ printk(KERN_INFO "CPU clock: %d.%03d MHz (%d.%03d-%d.%03d MHz)\n",
+ cpufreq_driver->freq[0].cur / 1000, cpufreq_driver->freq[0].cur % 1000,
+ cpufreq_driver->freq[0].min / 1000, cpufreq_driver->freq[0].min % 1000,
+ cpufreq_driver->freq[0].max / 1000, cpufreq_driver->freq[0].max % 1000);
+
+ up(&cpufreq_driver_sem);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_register);
+
+
+/**
+ * cpufreq_unregister:
+ *
+ * Unregister the current CPUFreq driver. Only call this if you have
+ * the right to do so, i.e. if you have succeeded in initialising before!
+ * Returns zero if successful, and -EINVAL if the cpufreq_driver is
+ * currently not initialised.
+ */
+int cpufreq_unregister(void)
+{
+ down(&cpufreq_driver_sem);
+
+ if (!cpufreq_driver) {
+ up(&cpufreq_driver_sem);
+ return -EINVAL;
+ }
+
+ cpufreq_driver = NULL;
+
+ up(&cpufreq_driver_sem);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_unregister);
+
--- /dev/null Sat May 12 19:23:16 2001
+++ linux/include/linux/cpufreq.h Fri Jul 19 00:23:30 2002
@@ -0,0 +1,113 @@
+/*
+ * linux/include/linux/cpufreq.h
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2002 Dominik Brodowski <devel@brodo.de>
+ *
+ *
+ * $Id: cpufreq.h,v 1.11 2002/07/18 22:23:30 db Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _LINUX_CPUFREQ_H
+#define _LINUX_CPUFREQ_H
+
+#include <linux/config.h>
+#include <linux/notifier.h>
+
+
+/* sysctl ctl_table entries */
+#define CTL_CPU_VARS_SPEED_MAX(cpunr) { \
+ ctl_name: CPU_NR_FREQ_MAX, \
+ procname: "speed-max", \
+ mode: 0444, \
+ proc_handler: cpufreq_procctl_max, \
+ extra1: (void*) (cpunr), }
+
+#define CTL_CPU_VARS_SPEED_MIN(cpunr) { \
+ ctl_name: CPU_NR_FREQ_MIN, \
+ procname: "speed-min", \
+ mode: 0444, \
+ proc_handler: cpufreq_procctl_min, \
+ extra1: (void*) (cpunr), }
+
+#define CTL_CPU_VARS_SPEED(cpunr) { \
+ ctl_name: CPU_NR_FREQ_MIN, \
+ procname: "speed", \
+ mode: 0644, \
+ proc_handler: cpufreq_procctl, \
+ strategy: cpufreq_sysctl, \
+ extra1: (void*) (cpunr), }
+
+#define CTL_CPU_VARS_SPEED_SYNC { \
+ ctl_name: CPU_NR_FREQ_SYNC, \
+ procname: "speed-sync", \
+ mode: 0444, \
+ proc_handler: cpufreq_procctl_sync }
+
+/* speed setting interface */
+
+int cpufreq_setmax(unsigned int cpu);
+int cpufreq_set(unsigned int cpu, unsigned int khz);
+unsigned int cpufreq_get(unsigned int cpu);
+
+#ifdef CONFIG_PM
+int cpufreq_restore(void);
+#endif
+
+
+/* notifier interface */
+
+/*
+ * The max and min frequency rates that the registered device
+ * can tolerate. Never set any element this structure directly -
+ * always use cpufreq_updateminmax.
+ */
+struct cpufreq_freqs {
+ unsigned int cpu;
+ unsigned int min;
+ unsigned int max;
+ unsigned int cur;
+ unsigned int new;
+};
+
+static inline
+void cpufreq_updateminmax(struct cpufreq_freqs *freq,
+ unsigned int min,
+ unsigned int max)
+{
+ if (freq->min < min)
+ freq->min = min;
+ if (freq->max > max)
+ freq->max = max;
+}
+
+#define CPUFREQ_MINMAX (0)
+#define CPUFREQ_PRECHANGE (1)
+#define CPUFREQ_POSTCHANGE (2)
+
+#define CPUFREQ_ALL_CPUS (60000)
+
+int cpufreq_register_notifier(struct notifier_block *nb);
+int cpufreq_unregister_notifier(struct notifier_block *nb);
+
+
+
+/* cpufreq driver interface */
+
+typedef unsigned int (*cpufreq_verify_t) (unsigned int cpu, unsigned int kHz);
+typedef void (*cpufreq_setspeed_t) (unsigned int cpu, unsigned int kHz);
+
+struct cpufreq_driver {
+ struct cpufreq_freqs *freq;
+ cpufreq_verify_t validate;
+ cpufreq_setspeed_t setspeed;
+ unsigned int sync; /* synchronized frequencies */
+};
+
+int cpufreq_register(struct cpufreq_driver *driver_data);
+int cpufreq_unregister(void);
+
+#endif
--- linux-original/include/linux/sysctl.h Thu Jul 18 23:24:26 2002
+++ linux/include/linux/sysctl.h Thu Jul 18 23:47:07 2002
@@ -631,6 +631,78 @@
         ABI_FAKE_UTSNAME=6, /* fake target utsname information */
 };
 
+/* /proc/sys/cpu */
+enum {
+ CPU_NR = 1, /* compatibilty reasons */
+ CPU_NR_0 = 1,
+ CPU_NR_1 = 2,
+ CPU_NR_2 = 3,
+ CPU_NR_3 = 4,
+ CPU_NR_4 = 5,
+ CPU_NR_5 = 6,
+ CPU_NR_6 = 7,
+ CPU_NR_7 = 8,
+ CPU_NR_8 = 9,
+ CPU_NR_9 = 10,
+ CPU_NR_10 = 11,
+ CPU_NR_11 = 12,
+ CPU_NR_12 = 13,
+ CPU_NR_13 = 14,
+ CPU_NR_14 = 15,
+ CPU_NR_15 = 16,
+ CPU_NR_16 = 17,
+ CPU_NR_17 = 18,
+ CPU_NR_18 = 19,
+ CPU_NR_19 = 20,
+ CPU_NR_20 = 21,
+ CPU_NR_21 = 22,
+ CPU_NR_22 = 23,
+ CPU_NR_23 = 24,
+ CPU_NR_24 = 25,
+ CPU_NR_25 = 26,
+ CPU_NR_26 = 27,
+ CPU_NR_27 = 28,
+ CPU_NR_28 = 29,
+ CPU_NR_29 = 30,
+ CPU_NR_30 = 31,
+ CPU_NR_31 = 32,
+};
+
+/* /proc/sys/cpu/{0,1,...,(NR_CPUS-1)} */
+enum {
+ CPU_NR_FREQ_MAX = 1,
+ CPU_NR_FREQ_MIN = 2,
+ CPU_NR_FREQ = 3,
+ CPU_NR_FREQ_SYNC = 4
+};
+
+
+/* for the CPU enumeration we need some more definitions */
+/* include macros */
+#ifdef CONFIG_CPU_FREQ
+#include <linux/cpufreq.h>
+#define CTL_CPU_VARS_CPUFREQ(cpunr) CTL_CPU_VARS_SPEED_MAX(cpunr), \
+ CTL_CPU_VARS_SPEED_MIN(cpunr), \
+ CTL_CPU_VARS_SPEED(cpunr), \
+ CTL_CPU_VARS_SPEED_SYNC,
+#else
+#define CTL_CPU_VARS_CPUFREQ(cpunr)
+#endif
+
+/* one ctl_table_vars_{0,1,...,(NR_CPUS-1)} for each CPU - this is only the
+ * macro for the definitions in kernel/sysctl.c */
+#define CTL_TABLE_CPU_VARS(cpunr) static ctl_table ctl_cpu_vars_##cpunr[] = {\
+ CTL_CPU_VARS_CPUFREQ(cpunr)\
+ { ctl_name: 0, }, }
+
+/* the ctl_table entry for each CPU - kernel/sysctl.c */
+#define CPU_ENUM(s) { \
+ ctl_name: (CPU_NR + s), \
+ procname: #s, \
+ mode: 0555, \
+ child: ctl_cpu_vars_##s }
+
+
 #ifdef __KERNEL__
 
 extern asmlinkage long sys_sysctl(struct __sysctl_args *);
--- linux-original/kernel/sysctl.c Thu Jul 18 23:24:57 2002
+++ linux/kernel/sysctl.c Thu Jul 18 23:44:06 2002
@@ -93,6 +93,24 @@
                   void *buffer, size_t *lenp);
 #endif
 
+#ifdef CONFIG_CPU_FREQ
+extern int cpufreq_sysctl(ctl_table *table, int *name, int nlen,
+ void *oldval, size_t *oldlenp,
+ void *newval, size_t newlen, void **context);
+extern int
+cpufreq_procctl(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp);
+extern int
+cpufreq_procctl_max(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp);
+extern int
+cpufreq_procctl_min(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp);
+extern int
+cpufreq_procctl_sync(ctl_table *ctl, int write, struct file *filp,
+ void *buffer, size_t *lenp);
+#endif
+
 #ifdef CONFIG_BSD_PROCESS_ACCT
 extern int acct_parm[];
 #endif
@@ -115,6 +133,7 @@
 static ctl_table fs_table[];
 static ctl_table debug_table[];
 static ctl_table dev_table[];
+static ctl_table cpu_table[];
 extern ctl_table random_table[];
 
 /* /proc declarations: */
@@ -152,6 +171,7 @@
         {CTL_FS, "fs", NULL, 0, 0555, fs_table},
         {CTL_DEBUG, "debug", NULL, 0, 0555, debug_table},
         {CTL_DEV, "dev", NULL, 0, 0555, dev_table},
+ {CTL_CPU, "cpu", NULL, 0, 0555, cpu_table},
         {0}
 };
 
@@ -345,6 +365,212 @@
 static ctl_table dev_table[] = {
         {0}
 };
+
+
+/* ctl_table ctl_cpu_vars_{0,1,...,(NR_CPUS-1)} */
+/* due to NR_CPUS tweaking, a lot of if/endifs are required, sorry */
+ CTL_TABLE_CPU_VARS(0);
+#if NR_CPUS > 1
+ CTL_TABLE_CPU_VARS(1);
+#endif
+#if NR_CPUS > 2
+ CTL_TABLE_CPU_VARS(2);
+#endif
+#if NR_CPUS > 3
+ CTL_TABLE_CPU_VARS(3);
+#endif
+#if NR_CPUS > 4
+ CTL_TABLE_CPU_VARS(4);
+#endif
+#if NR_CPUS > 5
+ CTL_TABLE_CPU_VARS(5);
+#endif
+#if NR_CPUS > 6
+ CTL_TABLE_CPU_VARS(6);
+#endif
+#if NR_CPUS > 7
+ CTL_TABLE_CPU_VARS(7);
+#endif
+#if NR_CPUS > 8
+ CTL_TABLE_CPU_VARS(8);
+#endif
+#if NR_CPUS > 9
+ CTL_TABLE_CPU_VARS(9);
+#endif
+#if NR_CPUS > 10
+ CTL_TABLE_CPU_VARS(10);
+#endif
+#if NR_CPUS > 11
+ CTL_TABLE_CPU_VARS(11);
+#endif
+#if NR_CPUS > 12
+ CTL_TABLE_CPU_VARS(12);
+#endif
+#if NR_CPUS > 13
+ CTL_TABLE_CPU_VARS(13);
+#endif
+#if NR_CPUS > 14
+ CTL_TABLE_CPU_VARS(14);
+#endif
+#if NR_CPUS > 15
+ CTL_TABLE_CPU_VARS(15);
+#endif
+#if NR_CPUS > 16
+ CTL_TABLE_CPU_VARS(16);
+#endif
+#if NR_CPUS > 17
+ CTL_TABLE_CPU_VARS(17);
+#endif
+#if NR_CPUS > 18
+ CTL_TABLE_CPU_VARS(18);
+#endif
+#if NR_CPUS > 19
+ CTL_TABLE_CPU_VARS(19);
+#endif
+#if NR_CPUS > 20
+ CTL_TABLE_CPU_VARS(20);
+#endif
+#if NR_CPUS > 21
+ CTL_TABLE_CPU_VARS(21);
+#endif
+#if NR_CPUS > 22
+ CTL_TABLE_CPU_VARS(22);
+#endif
+#if NR_CPUS > 23
+ CTL_TABLE_CPU_VARS(23);
+#endif
+#if NR_CPUS > 24
+ CTL_TABLE_CPU_VARS(24);
+#endif
+#if NR_CPUS > 25
+ CTL_TABLE_CPU_VARS(25);
+#endif
+#if NR_CPUS > 26
+ CTL_TABLE_CPU_VARS(26);
+#endif
+#if NR_CPUS > 27
+ CTL_TABLE_CPU_VARS(27);
+#endif
+#if NR_CPUS > 28
+ CTL_TABLE_CPU_VARS(28);
+#endif
+#if NR_CPUS > 29
+ CTL_TABLE_CPU_VARS(29);
+#endif
+#if NR_CPUS > 30
+ CTL_TABLE_CPU_VARS(30);
+#endif
+#if NR_CPUS > 31
+ CTL_TABLE_CPU_VARS(31);
+#endif
+#if NR_CPUS > 32
+#error please extend CPU enumeration
+#endif
+
+/* due to NR_CPUS tweaking, a lot of if/endifs are required, sorry */
+static ctl_table cpu_table[NR_CPUS + 1] = {
+ CPU_ENUM(0),
+#if NR_CPUS > 1
+ CPU_ENUM(1),
+#endif
+#if NR_CPUS > 2
+ CPU_ENUM(2),
+#endif
+#if NR_CPUS > 3
+ CPU_ENUM(3),
+#endif
+#if NR_CPUS > 4
+ CPU_ENUM(4),
+#endif
+#if NR_CPUS > 5
+ CPU_ENUM(5),
+#endif
+#if NR_CPUS > 6
+ CPU_ENUM(6),
+#endif
+#if NR_CPUS > 7
+ CPU_ENUM(7),
+#endif
+#if NR_CPUS > 8
+ CPU_ENUM(8),
+#endif
+#if NR_CPUS > 9
+ CPU_ENUM(9),
+#endif
+#if NR_CPUS > 10
+ CPU_ENUM(10),
+#endif
+#if NR_CPUS > 11
+ CPU_ENUM(11),
+#endif
+#if NR_CPUS > 12
+ CPU_ENUM(12),
+#endif
+#if NR_CPUS > 13
+ CPU_ENUM(13),
+#endif
+#if NR_CPUS > 14
+ CPU_ENUM(14),
+#endif
+#if NR_CPUS > 15
+ CPU_ENUM(15),
+#endif
+#if NR_CPUS > 16
+ CPU_ENUM(16),
+#endif
+#if NR_CPUS > 17
+ CPU_ENUM(17),
+#endif
+#if NR_CPUS > 18
+ CPU_ENUM(18),
+#endif
+#if NR_CPUS > 19
+ CPU_ENUM(19),
+#endif
+#if NR_CPUS > 20
+ CPU_ENUM(20),
+#endif
+#if NR_CPUS > 21
+ CPU_ENUM(21),
+#endif
+#if NR_CPUS > 22
+ CPU_ENUM(22),
+#endif
+#if NR_CPUS > 23
+ CPU_ENUM(23),
+#endif
+#if NR_CPUS > 24
+ CPU_ENUM(24),
+#endif
+#if NR_CPUS > 25
+ CPU_ENUM(25),
+#endif
+#if NR_CPUS > 26
+ CPU_ENUM(26),
+#endif
+#if NR_CPUS > 27
+ CPU_ENUM(27),
+#endif
+#if NR_CPUS > 28
+ CPU_ENUM(28),
+#endif
+#if NR_CPUS > 29
+ CPU_ENUM(29),
+#endif
+#if NR_CPUS > 30
+ CPU_ENUM(30),
+#endif
+#if NR_CPUS > 31
+ CPU_ENUM(31),
+#endif
+#if NR_CPUS > 32
+#error please extend CPU enumeration
+#endif
+ {
+ ctl_name: 0,
+ }
+};
+
 
 extern void init_irq_proc (void);
 
--- /dev/null Sat May 12 19:23:16 2001
+++ linux/Documentation/cpufreq Sat Jul 20 00:12:08 2002
@@ -0,0 +1,304 @@
+ CPU frequency and voltage scaling code in the Linux(TM) kernel
+
+
+ L i n u x C P U F r e q
+
+
+
+
+ Dominik Brodowski <devel@brodo.de>
+ David Kimdon <dwhedon@debian.org>
+
+
+
+ Clock scaling allows you to change the clock speed of the CPUs on the
+ fly. This is a nice method to save battery power, because the lower
+ the clock speed, the less power the CPU consumes.
+
+
+
+Contents:
+---------
+1. Supported architectures
+2. User interface
+2.1 Sample script for command line interface
+3. CPUFreq core and interfaces
+3.1 General information
+3.2 CPUFreq notifiers
+3.3 CPUFreq architecture drivers
+4. Mailing list and Links
+
+
+
+1. Supported architectures
+==========================
+
+Some architectures detect the lowest and highest possible speed
+settings, while others rely on user information on this. For the
+latter, a boot parameter is required. For the former, you can specify
+a boot parameter to set limits on the speed settings which may occur.
+The boot parameter has the following syntax:
+
+ cpufreq=minspeed-maxspeed
+
+with both minspeed and maxspeed given in kHz. To set the lower
+limit to 59 MHz and the upper limit to 221 MHz, specify:
+
+ cpufreq=59000-221000
+
+Check the "Speed Limits Detection" information below on whether
+the driver detects the lowest and highest allowed speed setting
+automatically.
+
+
+ARM Integrator:
+ SA 1100, SA1110
+--------------------------------
+ Speed Limits Detection: On Integrators, the minimum speed is set
+ and the maximum speed has to be specified using the boot
+ parameter. On SA11x0s, the frequencies are fixed (59 - 287 MHz)
+
+
+AMD Elan:
+ SC400, SC410
+--------------------------------
+ Speed Limits Detection: Not implemented. You need to specify the
+ minimum and maximum frequency in the boot parameter (see above).
+
+
+
+2. User Interface
+=================
+
+CPUFreq uses a "sysctl" interface which is located in
+ /proc/sys/cpu/0/
+ /proc/sys/cpu/1/ ... (SMP only)
+
+In these directories, you will find four files of importance for
+CPUFreq: speed-max, speed-min, speed-sync and speed:
+
+speed shows the current CPU frequency in kHz,
+speed-min the minimum supported CPU frequency, and
+speed-max the maximum supported CPU frequency.
+speed-sync is one if all CPUs need to run on the same clock
+ frequency, else zero.
+
+Please note that you might have to specify the speed limits as a boot
+parameter depending on the architecture (see above).
+
+
+To change the CPU frequency, "echo" the desired CPU frequency (in kHz)
+to speed. For example, to set the CPU speed to the lowest/highest
+allowed frequency do:
+
+root@notebook:# cat /proc/sys/cpu/0/speed-min > /proc/sys/cpu/0/speed
+root@notebook:# cat /proc/sys/cpu/0/speed-max > /proc/sys/cpu/0/speed
+
+
+2.1 Sample script for command line interface
+**********************************************
+
+
+Michael Ossmann <mike@ossmann.com> has written a small command line
+interface for the infinitely lazy.
+
+#!/bin/bash
+#
+# /usr/local/bin/freq
+# simple command line interface to cpufreq
+
+[ -n "$1" ] && case "$1" in
+ "min" )
+ # set frequency to minimum
+ cat /proc/sys/cpu/0/speed-min >/proc/sys/cpu/0/speed
+ ;;
+ "max" )
+ # set frequency to maximum
+ cat /proc/sys/cpu/0/speed-max >/proc/sys/cpu/0/speed
+ ;;
+ * )
+ echo "Usage: $0 [min|max]"
+ echo " min: set frequency to minimum and display new frequency"
+ echo " max: set frequency to maximum and display new frequency"
+ echo " no options: display current frequency"
+ exit 1
+ ;;
+esac
+
+# display current frequency
+cat /proc/sys/cpu/0/speed
+exit 0
+
+
+
+3. CPUFreq core and interfaces
+===============================
+
+3.1 General information
+*************************
+
+The CPUFreq core code is located in linux/kernel/cpufreq.c. This
+cpufreq code offers a standardized interface for the CPUFreq
+architecture drivers (those pieces of code that do the actual
+frequency transition), as well as to "notifiers". These are device
+drivers or other part of the kernel that need to be informed of
+frequency changes (like timing code) or even need to force certain
+speed limits (like LCD drivers on ARM architecture). Additionally, the
+kernel "constant" loops_per_jiffy is updated on frequency changes
+here.
+
+
+3.2 CPUFreq notifiers
+***********************
+
+CPUFreq notifiers conform to the standard kernel notifier interface.
+See linux/include/linux/notifier.h for details on notifiers.
+
+The second argument to a CPUFreq notifier is the phase of the
+transition.
+
+The third argument, a void *pointer, points to a struct cpufreq_freqs
+consisting of five values: cpu, min, max, cur and new. min and max
+are the minimum and maximum frequency rates that the device can
+tolerate. cur is the current/old speed. new is the new speed, but
+might only be valid during the CPUFREQ_PRECHANGE or
+CPUFREQ_POSTCHANGE phases. And cpu is either the number of the
+affected CPU or CPUFREQ_ALL_CPUS when all CPUs are affected.
+
+Each CPUFreq notifier is called three times for a speed transition :
+
+ 1. In preparation for a speed transition the kernel calls the
+ notifier with a phase of CPUFREQ_MINMAX in order to determine a
+ valid new frequency. At this point the notifier updates the min
+ and max values to the limits the protected device / kernel code
+ needs. Please note: Never update these values directly, use
+ cpufreq_updateminmax() instead.
+
+ 2. Right before the transition the notifier is called with a phase
+ of CPUFREQ_PRECHANGE.
+
+ 3. Right after the transition the notifier is called with a phase
+ of CPUFREQ_POSTCHANGE.
+
+For the CPUFREQ_PRECHANGE and CPUFREQ_POSTCHANGE phases the notifier
+updates all internal (e.g. device driver) states which depend on the
+CPU frequency.
+
+
+3.3 CPUFreq architecture drivers
+**********************************
+
+CPUFreq architecture drivers are the pieces of kernel code that
+actually perform CPU frequency transitions. These need to be
+initialized separately (separate initcalls), and may be
+modularized. They interact with the CPUFreq core in the following way:
+
+
+cpufreq_register()
+------------------
+cpufreq_register registers an arch driver to the CPUFreq core. Please
+note that only one arch driver may be registered at any time. -EBUSY
+is returned when an arch driver is already registered. The argument to
+cpufreq_register, struct cpufreq_driver *driver, is described later.
+
+
+cpufreq_unregister()
+--------------------
+cpufreq_unregister unregisters an arch driver, e.g. on module
+unloading. Please note that there is no check done that this is called
+from the driver which actually registered itself to the core, so
+please only call this function when you are sure the arch driver got
+registered correctly before.
+
+
+struct cpufreq_driver
+----------------
+On initialization, the arch driver is supposed to pass a pointer
+to a struct cpufreq_driver *cpufreq_driver consistng of the following
+entries:
+
+cpufreq_verify_t validate: This is a pointer to a function with the
+following definition:
+ unsigned int validating_function (unsigned int cpu,
+ unsigned int kHz).
+It is called right before a transition occurs. The proposed new
+speed setting is passed as an argument in kHz; the validating code
+should verify this is a valid speed setting which is currently
+supported by the CPU. It shall return the closest valid CPU frequency
+in kHz.
+
+cpufreq_setspeed_t setspeed: This is a pointer to a function with the
+following definition:
+ void setspeed_function (unsigned int cpu, unsigned int kHz).
+This function shall perform the transition to the new CPU frequency
+given as argument in kHz. Note that this argument is exactly the same
+as the one returned by cpufreq_verify_t validate.
+
+unsigned int snyc: one if all CPUs need to run on the same core frequency
+all the time, or zero if asynchronous frequencies are possible.
+
+struct cpufreq_freqs *freq: if (sync==1) this must point to one struct
+cpufreq_freqs, if (sync==0) it must point to an array of NR_CPUS struct
+cpufreq_freqs. Each struct cpufreq_freq consists of the following entries:
+
+unsigned int freq->cur: The current CPU core frequency. Note that this
+is a requirement while the next two entries are optional.
+
+unsigned int freq.min (optional): The minimum CPU core frequency this
+CPU supports. This value may be limited further by the
+cpufreq_verify_t validate function, and so this value should be the
+minimum core frequency allowed "theoretically" on this system in this
+configuration.
+
+
+unsigned int freq.max (optional): The maximum CPU core frequency this
+CPU supports. This value may be limited further by the
+cpufreq_verify_t validate function, and so this value should be the
+maximum core frequency allowed "theoretically" on this system in this
+configuration.
+
+
+Some Requirements to CPUFreq architecture drivers
+-------------------------------------------------
+* Only call cpufreq_register() when the ability to switch CPU
+ frequencies is _verified_ or can't be missing
+* cpufreq_unregister() may only be called if cpufreq_register() has
+ been successfully(!) called before.
+* kfree() the struct cpufreq_driver only after the call to
+ cpufreq_unregister(), except cpufreq_register() failed.
+* Be aware that there is currently no error management in the
+ setspeed() code in the CPUFreq core. So only call yourself a
+ cpufreq_driver if you are really a working cpufreq_driver!
+
+
+
+4. Mailing list and Links
+**************************
+
+
+Mailing List
+------------
+There is a CPU frequency changing CVS commit and general list where
+you can report bugs, problems or submit patches. To post a message,
+send an email to cpufreq@www.linux.org.uk, to subscribe go to
+http://www.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the
+mailing list are available to subscribers at
+http://www.linux.org.uk/mailman/private/cpufreq/.
+
+
+Links
+-----
+the FTP archives:
+* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
+
+how to access the CVS repository:
+* http://cvs.arm.linux.org.uk/
+
+the CPUFreq Mailing list:
+* http://www.linux.org.uk/mailman/listinfo/cpufreq
+
+Clock and voltage scaling for the SA-1100:
+* http://www.lart.tudelft.nl/projects/scaling
+
+CPUFreq project homepage
+* http://www.brodo.de/cpufreq/



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:31 EST