Re: problems with 1gb ddr memory sticks on linux

From: Kasper Dupont (kasperd@daimi.au.dk)
Date: Thu Aug 08 2002 - 11:19:26 EST


"Bryan K. Walton" wrote:
>
> I have a box running Debian 3.0 with a Via C3 800mhz processor
> that slows to a crawl when I put in a 1GB stick of PC2100 DDR memory.
>
> The board, a Gigabyte GA-6RX, supports this memory stick.

Could it be the case, that it really doesn't support that
memory eventhough it claims to?

> My 2.4.18 kernel is compiled with High Memory support and linux and the
> bios see all of the memory.

Did you try without High Memory support?

> However, the box is VERY slow. It takes
> about 5 minutes to install .deb binary. It took me 12 hours to compile
> the 2.4.18 kernel!
>
> Here is what I have done to rule things out . . .
>
> 1) The box runs FAST with M$ Windows 2000.
> 2) The box runs FAST when using identical kinds of memory but in
> quantities of 512MB or less.

Did you try with a total of 1024MB on two 512MB modules?

> 3) The box runs slow with other linux distos also. (I tried Redhat 7.2)
>
> It seems to me that the problem has something to do with the linux
> kernel and 1GB memory sticks. Am I off base?

Try the "slow" memory and use a mem= boot option to tell the
Linux kernel not to use all of it.

>
> Anyone have any ideas?

I wonder if it could be the case, that it for some reason doesn't
use cache for all the memory.

-- 
Kasper Dupont -- der bruger for meget tid på usenet.
For sending spam use mailto:razrep@daimi.au.dk
or mailto:mcxumhvenwblvtl@skrammel.yaboo.dk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Aug 15 2002 - 22:00:16 EST