Re: Linux 2.4.19-ac2

From: Devilkin (Devilkin-LKML@blindguardian.org)
Date: Sun Aug 04 2002 - 13:57:57 EST


On Sunday 04 August 2002 19:46, Alan Cox wrote:
<snip>

There seems to be some problem with VIA IDE IRQ's on 2.4.19-ac2.

With 2.4.19-ac2 i get the following message in the logs:

PCI: No IRQ known for interrupt pin A of device 00:07.1. Please try using
pci=biosirq.

00:07.1 is the IDE Interface on my mainboard!

checking with lspci gives this output:

----------------
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if
8f [Master SecP SecO PriP PriO])
        Subsystem: VIA Technologies, Inc. Bus Master IDE
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Interrupt: pin A routed to IRQ 0
        Region 0: I/O ports at <ignored>
        Region 1: I/O ports at <ignored>
        Region 2: I/O ports at <ignored>
        Region 3: I/O ports at <ignored>
        Region 4: I/O ports at d400 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
----------------

whereas with older kernels (2.4.19-ac1 and previous kernels) this error isn't
given, and lspci looks as follows:

----------------
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if
8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. Bus Master IDE
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Region 4: I/O ports at d400 [size=16]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
----------------
which somehow looks healthier.

I've reverted to -ac1 for now, which works fine on my box.

DK
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Wed Aug 07 2002 - 22:00:25 EST