Re: 2.4.18 + 19pre10 + ac2 gives cdrw ide-scsi data discarded errors

From: Bill Davidsen (davidsen@tmr.com)
Date: Thu Jun 27 2002 - 16:04:08 EST


On Wed, 26 Jun 2002, Mark Cooke wrote:

> On a brand new system (Abit IT7), I've been getting errors writing CDs.
> As it's a new machine, I've not successfully written any CDs yet, so it
> is potentially a faulty cdrw drive, but I'm also a little suspicious that
> it's a possible issue with the motherboard.

What did the folks on the cdwrite mailing list say?
cdwrite@other.debian.org is the best place for this, unless you're
triggering some odd kernel thing the problem is yours, but you're using
frontends for frontends for the software doing the work, and no indication
of what version of the apps you run. Most distributions use very old
versions of cdrecord and mkisofs, you need cdrtools 11a24 or later before
the author will stop telling you to send your software to an archelogist.
 
> Configuration:
>
> Two hard disks on the highpoint 374, raid-1.
> DVD on hda
> CDRW on sg0/sr0 (hdc before setting up ide-scsi)
>
> Using xcdroast, gives:
>
> Performing OPC...
> cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
> CDB: 54 01 00 00 00 00 00 00 00 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 200.114s timeout 200s
> cdrecord: Resource temporarily unavailable. OPC failed.
>
> when trying to write an image.
>
> In syslog:
>
> SCSI subsystem driver Revision: 1.00
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: LITE-ON Model: LTR-32123S Rev: XS0X
> Type: CD-ROM ANSI SCSI revision: 02
> ide-scsi: The scsi wants to send us more data than expected - discarding data
> ide-scsi: transferred 1 of 2 bytes
> ide-scsi: The scsi wants to send us more data than expected - discarding data
> ide-scsi: transferred 1 of 2 bytes
> scsi : aborting command due to timeout : pid 241, scsi0, channel 0, id 0,
> lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00
>
> Google didn't turn up anything recent about discarded data, but I recall
> there being some recent changes to ide-scsi in 2.4.x.
>
> Anyone else seeing this with very recent 2.4.x ? Any thoughts about how
> to proceed ? It is difficult to try earlier kernels as the highpoint 374
> is only very recently supported.
>
> Cheers,
>
> Mark
>
> dmesg:
>
> Linux version 2.4.18-19pre10ac2b (root@pc24.sr.bham.ac.uk) (gcc version
> 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Wed Jun 26 17:59:22 BST
> 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 511MB LOWMEM available.
> On node 0 totalpages: 131056
> zone(0): 4096 pages.
> zone(1): 126960 pages.
> zone(2): 0 pages.
> Kernel command line: initrd=initrd.img root=/dev/md0 BOOT_IMAGE=vmlinuz
> auto
> Initializing CPU#0
> Detected 2010.002 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 4010.80 BogoMIPS
> Memory: 514428k/524224k available (1111k kernel code, 9408k reserved, 299k
> data, 296k init, 0k highmem)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> CPU: Common caps: 3febfbff 00000000 00000000 00000000
> CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> Unknown bridge resource 2: assuming transparent
> PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
> PCI: Found IRQ 7 for device 00:1f.1
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
> Starting kswapd
> VFS: Diskquotas version dquot_6.5.0 initialized
> pty: 2048 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
> SHARE_IRQ SERIAL_PCI ISAPNP enabled
> Real Time Clock Driver v1.10e
> block: 992 slots per queue, batch=248
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev f9
> PCI: Found IRQ 7 for device 00:1f.1
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
> HPT374: IDE controller on PCI bus 02 dev 20
> PCI: Found IRQ 11 for device 02:04.0
> PCI: Sharing IRQ 11 with 02:04.1
> HPT374: chipset revision 7
> HPT374: not 100% native mode: will probe irqs later
> HPT37X: using 33MHz PCI clock
> ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:DMA, hdf:pio
> ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:DMA, hdh:pio
> HPT374: IDE controller on PCI bus 02 dev 21
> PCI: Found IRQ 11 for device 02:04.1
> PCI: Sharing IRQ 11 with 02:04.0
> HPT374: chipset revision 7
> HPT374: not 100% native mode: will probe irqs later
> HPT37X: using 33MHz PCI clock
> ide4: BM-DMA at 0xb800-0xb807, BIOS settings: hdi:pio, hdj:pio
> ide5: BM-DMA at 0xb808-0xb80f, BIOS settings: hdk:pio, hdl:pio
> hda: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
> hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
> hde: ST340016A, ATA DISK drive
> hdg: ST340016A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide2 at 0x9400-0x9407,0x9802 on irq 11
> ide3 at 0x9c00-0x9c07,0xa002 on irq 11
> hde: host protected area => 1
> hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63,
> UDMA(100)
> hdg: host protected area => 1
> hdg: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63,
> UDMA(100)
> ide-floppy driver 0.99.newide
> Partition check:
> hde: hde1 hde2 hde3 hde4
> hdg: hdg1 hdg2 hdg3 hdg4
> Floppy drive(s): fd0 is 1.44M
>
> <snip>
>
> ide-floppy driver 0.99.newide
> hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> ide-cd: ignoring drive hdc
> hda: DMA disabled
> ide-cd: ignoring drive hdc
> ide-floppy driver 0.99.newide
> hdc: driver not present
> ip_conntrack (4095 buckets, 32760 max)
> 8139too Fast Ethernet driver 0.9.24
> PCI: Found IRQ 10 for device 02:06.0
> eth1: RealTek RTL8139 Fast Ethernet at 0xe09b6000, 00:50:8d:a8:06:7e, IRQ 10
> eth1: Identified 8139 chip type 'RTL-8139C'
> eth1: Media type forced to Full Duplex.
> eth1: Setting 100mbps full-duplex based on auto-negotiated partner ability 4181.
> cipcb: CIPE driver vers 1.4.5 (c) Olaf Titz 1996-2000, 100 channels, debug=0
> Intel 810 + AC97 Audio, version 0.21, 18:15:16 Jun 26 2002
> PCI: Found IRQ 3 for device 00:1f.5
> PCI: Sharing IRQ 3 with 00:1f.3
> PCI: Setting latency timer of device 00:1f.5 to 64
> i810: Intel ICH4 found at IO 0xe400 and 0xe000, IRQ 3
> i810_audio: Audio Controller supports 6 channels.
> ac97_codec: AC97 Audio codec, id: 0x414c:0x4720 (ALC650)
> i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
> ide-cd: ignoring drive hdc
> ide-floppy driver 0.99.newide
> hdc: driver not present
> cdrom: This disc doesn't have any tracks I recognize!
> ide-cd: ignoring drive hdc
> ide-floppy driver 0.99.newide
> hdc: driver not present
> ide-cd: ignoring drive hdc
> ide-floppy driver 0.99.newide
> hdc: driver not present
> ide-cd: ignoring drive hdc
> ide-floppy driver 0.99.newide
> hdc: driver not present
> SCSI subsystem driver Revision: 1.00
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: LITE-ON Model: LTR-32123S Rev: XS0X
> Type: CD-ROM ANSI SCSI revision: 02
> ide-scsi: The scsi wants to send us more data than expected - discarding data
> ide-scsi: transferred 1 of 2 bytes
> ide-scsi: The scsi wants to send us more data than expected - discarding data
> ide-scsi: transferred 1 of 2 bytes
> scsi : aborting command due to timeout : pid 241, scsi0, channel 0, id 0, lun 0 UNKNOWN(0x54) 01 00 00 00 00 00 00 00 00
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: DMA disabled
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

-- 
bill davidsen <davidsen@tmr.com>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jun 30 2002 - 22:00:12 EST