Tue Jun 4 16:50:01 CEST 2002 ide-clean-85
- Work a bit on the automatic CRC error recovery handling. System still hangs.
But one thing for sure - we don't have to use any specialized irq handler for
it.
- Since ioctl don't any longer submit requests to the queue without
rq->special set, we can safely remove args_error handling from
start_request.
- Make REQ_SPECIAL usage in ide-floppy obvious.
- Use REQ_SPECIAL everywhere instead of REQ_DRIVE_ACB. This is actually a bit
dangerous but should work as far as I can see.
- Unfold the now not REQ_SPECIAL specific dequeing part of ide_end_drive_cmd().
Turns out that we can thereafter remove the calls to ide_end_drice_cmd() at
places where the request type isn't REQ_SPECIAL all any longer. (tcq.c)
- After the above operation it turns out that there are just two places where
ide_end_drive_cmd remains, namely: ata_error, task_no_data_intr
drive_cmd_intr.
We can avoid it by changing the logics in ata_error a slightly.
So now just to cases remain where ide_end_drive_cmd remains used:
drive_cmd_intr and task_no_data_intr.
- Now looking a bit closer we can realize that drive_cmd_intr and
task_no_data_intr can be easly merged together, since the usage of
task_no_data_intr implied taskfile.sector_number == 0.
- Use one single ata_special_intr function for the handling of interrupts
submitted through ide_raw_cmd.
- Move the remaining artefacts of ide_end_drive_cmd directly to
ata_special_intr. Oh we don't need to check for REQ_SPECIAL any longer there,
since the context is already known.
- Set the ata_special_intr handler and command type directly inside
ide_raw_taskfile to save code.
diff -urN linux-2.5.20/drivers/block/ll_rw_blk.c linux/drivers/block/ll_rw_blk.c
--- linux-2.5.20/drivers/block/ll_rw_blk.c 2002-06-03 03:44:41.000000000 +0200
+++ linux/drivers/block/ll_rw_blk.c 2002-06-05 02:37:13.000000000 +0200
@@ -507,7 +507,6 @@
"REQ_STARTED",
"REQ_DONTPREP",
"REQ_QUEUED",
- "REQ_DRIVE_ACB",
"REQ_PC",
"REQ_BLOCK_PC",
"REQ_SENSE",
diff -urN linux-2.5.20/drivers/ide/icside.c linux/drivers/ide/icside.c
--- linux-2.5.20/drivers/ide/icside.c 2002-06-05 13:06:33.000000000 +0200
+++ linux/drivers/ide/icside.c 2002-06-05 11:56:14.000000000 +0200
@@ -281,7 +281,7 @@
struct scatterlist *sg = ch->sg_table;
int nents;
- if (rq->flags & REQ_DRIVE_ACB) {
+ if (rq->flags & REQ_SPECIAL) {
struct ata_taskfile *args = rq->special;
if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE)
@@ -391,7 +391,7 @@
udma_tcq_enable(drive, 0);
#endif
}
-
+
/*
* We don't need any bouncing. Yes, this looks the
* wrong way around, but it is correct.
@@ -492,7 +492,7 @@
*/
BUG_ON(dma_channel_active(ch->hw.dma));
- count = ch->sg_nents = ide_build_sglist(ch, rq);
+ count = ch->sg_nents = ide_build_sglist(drive, rq);
if (!count)
return 1;
@@ -518,33 +518,6 @@
return 0;
}
-static int icside_dma_read(struct ata_device *drive, struct request *rq)
-{
- struct ata_channel *ch = drive->channel;
- unsigned int cmd;
-
- if (icside_dma_common(drive, rq, DMA_MODE_READ))
- return 1;
-
- if (drive->type != ATA_DISK)
- return 0;
-
- ide_set_handler(drive, icside_dmaintr, WAIT_CMD, NULL);
-
- if ((rq->flags & REQ_DRIVE_ACB) && drive->addressing == 1) {
- struct ata_taskfile *args = rq->special;
- cmd = args->taskfile.command;
- } else if (drive->addressing) {
- cmd = WIN_READDMA_EXT;
- } else {
- cmd = WIN_READDMA;
- }
-
- OUT_BYTE(cmd, IDE_COMMAND_REG);
- enable_dma(ch->hw.dma);
- return 0;
-}
-
static int icside_dma_init(struct ata_device *drive, struct request *rq)
{
struct ata_channel *ch = drive->channel;
@@ -558,13 +531,13 @@
ide_set_handler(drive, icside_dmaintr, WAIT_CMD, NULL);
- if ((rq->flags & REQ_DRIVE_ACB) && drive->addressing == 1) {
+ if ((rq->flags & REQ_SPECIAL) && drive->addressing == 1) {
struct ata_taskfile *args = rq->special;
- cmd = args->taskfile.command;
+ cmd = args->cmd;
} else if (drive->addressing) {
- cmd = WIN_WRITEDMA_EXT;
+ cmd = rq_data_dir(rq) == WRITE ? WIN_WRITEDMA_EXT : WIN_READDMA_EXT;
} else {
- cmd = WIN_WRITEDMA;
+ cmd = rq_data_dir(rq) == WRITE ? WIN_WRITEDMA : WIN_READDMA;
}
OUT_BYTE(cmd, IDE_COMMAND_REG);
diff -urN linux-2.5.20/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.20/drivers/ide/ide.c 2002-06-05 13:06:36.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-06-05 02:37:13.000000000 +0200
@@ -389,37 +389,6 @@
IN_BYTE(IDE_SECTOR_REG);
}
-/*
- * Clean up after success/failure of an explicit drive cmd
- *
- * Should be called under lock held.
- */
-void ide_end_drive_cmd(struct ata_device *drive, struct request *rq)
-{
- if (rq->flags & REQ_DRIVE_ACB) {
- struct ata_taskfile *ar = rq->special;
-
- rq->errors = !ata_status(drive, READY_STAT, BAD_STAT);
- if (ar) {
- ar->taskfile.feature = IN_BYTE(IDE_ERROR_REG);
- ata_in_regfile(drive, &ar->taskfile);
- ar->taskfile.device_head = IN_BYTE(IDE_SELECT_REG);
- if ((drive->id->command_set_2 & 0x0400) &&
- (drive->id->cfs_enable_2 & 0x0400) &&
- (drive->addressing == 1)) {
- /* The following command goes to the hob file! */
- OUT_BYTE(0x80, drive->channel->io_ports[IDE_CONTROL_OFFSET]);
- ar->hobfile.feature = IN_BYTE(IDE_FEATURE_REG);
- ata_in_regfile(drive, &ar->hobfile);
- }
- }
- }
-
- blkdev_dequeue_request(rq);
- drive->rq = NULL;
- end_that_request_last(rq);
-}
-
#if FANCY_STATUS_DUMPS
struct ata_bit_messages {
u8 mask;
@@ -552,25 +521,11 @@
#endif
/*
- * This is invoked on completion of a WIN_RESTORE (recalibrate) cmd.
- *
- * FIXME: Why can't be just use task_no_data_intr here?
- */
-static ide_startstop_t recal_intr(struct ata_device *drive, struct request *rq)
-{
- if (!ata_status(drive, READY_STAT, BAD_STAT))
- return ata_error(drive, rq, __FUNCTION__);
-
- return ide_stopped;
-}
-
-/*
* We are still on the old request path here so issuing the recalibrate command
* directly should just work.
*/
static int do_recalibrate(struct ata_device *drive)
{
- printk(KERN_INFO "%s: recalibrating!\n", drive->name);
if (drive->type != ATA_DISK)
return ide_stopped;
@@ -578,12 +533,12 @@
if (!IS_PDC4030_DRIVE) {
struct ata_taskfile args;
+ printk(KERN_INFO "%s: recalibrating...\n", drive->name);
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = drive->sect;
args.cmd = WIN_RESTORE;
- args.handler = recal_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- ata_taskfile(drive, &args, NULL);
+ ide_raw_taskfile(drive, &args);
+ printk(KERN_INFO "%s: done!\n", drive->name);
}
return IS_PDC4030_DRIVE ? ide_stopped : ide_started;
@@ -604,7 +559,6 @@
/* retry only "normal" I/O: */
if (!(rq->flags & REQ_CMD)) {
rq->errors = 1;
- ide_end_drive_cmd(drive, rq);
return ide_stopped;
}
@@ -633,6 +587,7 @@
OUT_BYTE(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG); /* force an abort */
if (rq->errors >= ERROR_MAX) {
+ printk(KERN_ERR "%s: max number of retries exceeded!\n", drive->name);
if (ata_ops(drive) && ata_ops(drive)->end_request)
ata_ops(drive)->end_request(drive, rq, 0);
else
@@ -729,10 +684,10 @@
/* Strange disk manager remap.
*/
- if ((rq->flags & REQ_CMD) &&
- (drive->type == ATA_DISK || drive->type == ATA_FLOPPY)) {
- block += drive->sect0;
- }
+ if (rq->flags & REQ_CMD)
+ if (drive->type == ATA_DISK || drive->type == ATA_FLOPPY)
+ block += drive->sect0;
+
/* Yecch - this will shift the entire interval, possibly killing some
* innocent following sector.
@@ -753,14 +708,8 @@
/* This issues a special drive command.
*/
- if (rq->flags & REQ_DRIVE_ACB) {
- struct ata_taskfile *ar = rq->special;
-
- if (!(ar))
- goto args_error;
-
- return ata_taskfile(drive, ar, NULL);
- }
+ if (rq->flags & REQ_SPECIAL)
+ return ata_taskfile(drive, rq->special, NULL);
/* The normal way of execution is to pass and execute the request
* handler down to the device type driver.
@@ -789,19 +738,6 @@
ide_end_request(drive, rq, 0);
return ide_stopped;
-
-args_error:
-
- /* NULL as arguemnt is used by ioctls as a way of waiting for all
- * current requests to be flushed from the queue.
- */
-
-#ifdef DEBUG
- printk("%s: DRIVE_CMD (null)\n", drive->name);
-#endif
- ide_end_drive_cmd(drive, rq);
-
- return ide_stopped;
}
ide_startstop_t restart_request(struct ata_device *drive)
@@ -1485,8 +1421,8 @@
EXPORT_SYMBOL(ata_error);
EXPORT_SYMBOL(ide_wait_stat);
+/* FIXME: this is a trully bad name */
EXPORT_SYMBOL(restart_request);
-EXPORT_SYMBOL(ide_end_drive_cmd);
EXPORT_SYMBOL(__ide_end_request);
EXPORT_SYMBOL(ide_end_request);
EXPORT_SYMBOL(ide_stall_queue);
diff -urN linux-2.5.20/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.20/drivers/ide/ide-disk.c 2002-06-05 13:06:36.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-06-05 02:37:13.000000000 +0200
@@ -372,9 +372,8 @@
}
}
}
- ar->handler = task_no_data_intr;
- ar->command_type = IDE_DRIVE_TASK_NO_DATA;
+ /* not reached! */
return WIN_NOP;
}
@@ -582,23 +581,21 @@
{
MOD_INC_USE_COUNT;
if (drive->removable && drive->usage == 1) {
- struct ata_taskfile args;
-
check_disk_change(inode->i_rdev);
- memset(&args, 0, sizeof(args));
- args.cmd = WIN_DOORLOCK;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
/*
* Ignore the return code from door_lock, since the open() has
* already succeeded once, and the door_lock is irrelevant at this
* time.
*/
+ if (drive->doorlocking) {
+ struct ata_taskfile args;
- if (drive->doorlocking && ide_raw_taskfile(drive, &args))
- drive->doorlocking = 0;
+ memset(&args, 0, sizeof(args));
+ args.cmd = WIN_DOORLOCK;
+ if (ide_raw_taskfile(drive, &args))
+ drive->doorlocking = 0;
+ }
}
return 0;
}
@@ -613,29 +610,23 @@
args.cmd = WIN_FLUSH_CACHE_EXT;
else
args.cmd = WIN_FLUSH_CACHE;
-
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
return ide_raw_taskfile(drive, &args);
}
static void idedisk_release(struct inode *inode, struct file *filp, struct ata_device *drive)
{
if (drive->removable && !drive->usage) {
- struct ata_taskfile args;
-
/* XXX I don't think this is up to the lowlevel drivers.. --hch */
invalidate_bdev(inode->i_bdev, 0);
- memset(&args, 0, sizeof(args));
- args.cmd = WIN_DOORUNLOCK;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
- if (drive->doorlocking &&
- ide_raw_taskfile(drive, &args))
- drive->doorlocking = 0;
+ if (drive->doorlocking) {
+ struct ata_taskfile args;
+
+ memset(&args, 0, sizeof(args));
+ args.cmd = WIN_DOORUNLOCK;
+ if (ide_raw_taskfile(drive, &args))
+ drive->doorlocking = 0;
+ }
}
if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
if (idedisk_flushcache(drive))
@@ -680,9 +671,6 @@
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = arg;
args.cmd = WIN_SETMULT;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
if (!ide_raw_taskfile(drive, &args)) {
/* all went well track this setting as valid */
drive->mult_count = arg;
@@ -712,9 +700,6 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = (arg) ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
args.cmd = WIN_SETFEATURES;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
ide_raw_taskfile(drive, &args);
drive->wcache = arg;
@@ -728,9 +713,6 @@
memset(&args, 0, sizeof(args));
args.cmd = WIN_STANDBYNOW1;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
return ide_raw_taskfile(drive, &args);
}
@@ -742,9 +724,6 @@
args.taskfile.feature = (arg)?SETFEATURES_EN_AAM:SETFEATURES_DIS_AAM;
args.taskfile.sector_count = arg;
args.cmd = WIN_SETFEATURES;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
ide_raw_taskfile(drive, &args);
drive->acoustic = arg;
@@ -864,9 +843,6 @@
memset(&args, 0, sizeof(args));
args.taskfile.device_head = 0x40;
args.cmd = WIN_READ_NATIVE_MAX;
- args.handler = task_no_data_intr;
-
- /* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
@@ -892,9 +868,6 @@
args.taskfile.device_head = 0x40;
args.cmd = WIN_READ_NATIVE_MAX_EXT;
- args.handler = task_no_data_intr;
-
- /* submit command request */
ide_raw_taskfile(drive, &args);
/* if OK, compute maximum address value */
@@ -933,9 +906,8 @@
args.taskfile.device_head = ((addr_req >> 24) & 0x0f) | 0x40;
args.cmd = WIN_SET_MAX;
- args.handler = task_no_data_intr;
- /* submit command request */
ide_raw_taskfile(drive, &args);
+
/* if OK, read new maximum address value */
if (!(drive->status & ERR_STAT)) {
addr_set = ((args.taskfile.device_head & 0x0f) << 24)
@@ -965,12 +937,10 @@
args.hobfile.sector_number = (addr_req >>= 8);
args.hobfile.low_cylinder = (addr_req >>= 8);
args.hobfile.high_cylinder = (addr_req >>= 8);
-
args.hobfile.device_head = 0x40;
- args.handler = task_no_data_intr;
- /* submit command request */
ide_raw_taskfile(drive, &args);
+
/* if OK, compute maximum address value */
if (!(drive->status & ERR_STAT)) {
u32 high = (args.hobfile.high_cylinder << 16) |
diff -urN linux-2.5.20/drivers/ide/ide-floppy.c linux/drivers/ide/ide-floppy.c
--- linux-2.5.20/drivers/ide/ide-floppy.c 2002-06-03 03:44:44.000000000 +0200
+++ linux/drivers/ide/ide-floppy.c 2002-06-05 02:37:13.000000000 +0200
@@ -308,8 +308,6 @@
#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
-#define IDEFLOPPY_RQ (REQ_SPECIAL)
-
/*
* Error codes which are returned in rq->errors to the higher part
* of the driver.
@@ -633,7 +631,7 @@
if (!rq)
return 0;
- if (!(rq->flags & IDEFLOPPY_RQ)) {
+ if (!(rq->flags & REQ_SPECIAL)) {
ide_end_request(drive, rq, uptodate);
return 0;
}
@@ -717,7 +715,7 @@
struct atapi_packet_command *pc, struct request *rq)
{
memset(rq, 0, sizeof(*rq));
- rq->flags = IDEFLOPPY_RQ;
+ rq->flags = REQ_SPECIAL;
/* FIXME: --mdcki */
rq->buffer = (char *) pc;
(void) ide_do_drive_cmd (drive, rq, ide_preempt);
@@ -1251,7 +1249,7 @@
}
pc = idefloppy_next_pc_storage(drive);
idefloppy_create_rw_cmd (floppy, pc, rq, block);
- } else if (rq->flags & IDEFLOPPY_RQ) {
+ } else if (rq->flags & REQ_SPECIAL) {
/* FIXME: --mdcki */
pc = (struct atapi_packet_command *) rq->buffer;
} else {
@@ -1274,7 +1272,7 @@
memset(&rq, 0, sizeof(rq));
/* FIXME: --mdcki */
rq.buffer = (char *) pc;
- rq.flags = IDEFLOPPY_RQ;
+ rq.flags = REQ_SPECIAL;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
diff -urN linux-2.5.20/drivers/ide/ide-pmac.c linux/drivers/ide/ide-pmac.c
--- linux-2.5.20/drivers/ide/ide-pmac.c 2002-06-03 03:44:51.000000000 +0200
+++ linux/drivers/ide/ide-pmac.c 2002-06-05 11:50:35.000000000 +0200
@@ -1126,7 +1126,7 @@
udelay(1);
/* Build sglist */
- if (rq->flags & REQ_DRIVE_ACB) {
+ if (rq->flags & REQ_SPECIAL) {
pmac_ide[ix].sg_nents = i = pmac_raw_build_sglist(ix, rq);
} else {
pmac_ide[ix].sg_nents = i = pmac_ide_build_sglist(ix, rq);
@@ -1437,10 +1437,11 @@
if (drive->type != ATA_DISK)
return 0;
ide_set_handler(drive, ide_dma_intr, WAIT_CMD, NULL);
- if ((rq->flags & REQ_DRIVE_ACB) &&
+ if ((rq->flags & REQ_SPECIAL) &&
(drive->addressing == 1)) {
struct ata_taskfile *args = rq->special;
- OUT_BYTE(args->taskfile.command, IDE_COMMAND_REG);
+ /* FIXME: this is never reached */
+ OUT_BYTE(args->cmd, IDE_COMMAND_REG);
} else if (drive->addressing) {
OUT_BYTE(reading ? WIN_READDMA_EXT : WIN_WRITEDMA_EXT, IDE_COMMAND_REG);
} else {
diff -urN linux-2.5.20/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.20/drivers/ide/ide-taskfile.c 2002-06-05 13:06:36.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-06-05 02:37:13.000000000 +0200
@@ -176,27 +176,6 @@
return 1; /* drive ready: *might* be interrupting */
}
-/*
- * Handler for commands without a data phase
- */
-ide_startstop_t task_no_data_intr(struct ata_device *drive, struct request *rq)
-{
- struct ata_taskfile *ar = rq->special;
-
- ide__sti(); /* local CPU only */
-
- if (!ata_status(drive, READY_STAT, BAD_STAT)) {
- /* Keep quiet for NOP because it is expected to fail. */
- if (ar && ar->cmd != WIN_NOP)
- return ata_error(drive, rq, __FUNCTION__);
- }
-
- if (ar)
- ide_end_drive_cmd(drive, rq);
-
- return ide_stopped;
-}
-
ide_startstop_t ata_taskfile(struct ata_device *drive,
struct ata_taskfile *ar, struct request *rq)
{
@@ -385,21 +364,72 @@
}
-int ide_raw_taskfile(struct ata_device *drive, struct ata_taskfile *args)
+
+/*
+ * Invoked on completion of a special REQ_SPECIAL command.
+ */
+ide_startstop_t ata_special_intr(struct ata_device *drive, struct
+ request *rq) {
+
+ struct ata_taskfile *ar = rq->special;
+ ide_startstop_t ret = ide_stopped;
+
+ ide__sti(); /* local CPU only */
+ if (rq->buffer && ar->taskfile.sector_number) {
+ if (!ata_status(drive, 0, DRQ_STAT) && ar->taskfile.sector_number) {
+ int retries = 10;
+
+ ata_read(drive, rq->buffer, ar->taskfile.sector_number * SECTOR_WORDS);
+
+ while (!ata_status(drive, 0, BUSY_STAT) && retries--)
+ udelay(100);
+ }
+ }
+
+ if (!ata_status(drive, READY_STAT, BAD_STAT)) {
+ /* Keep quiet for NOP because it is expected to fail. */
+ if (ar->cmd != WIN_NOP)
+ ret = ata_error(drive, rq, __FUNCTION__);
+ rq->errors = 1;
+ }
+
+ ar->taskfile.feature = IN_BYTE(IDE_ERROR_REG);
+ ata_in_regfile(drive, &ar->taskfile);
+ ar->taskfile.device_head = IN_BYTE(IDE_SELECT_REG);
+ if ((drive->id->command_set_2 & 0x0400) &&
+ (drive->id->cfs_enable_2 & 0x0400) &&
+ (drive->addressing == 1)) {
+ /* The following command goes to the hob file! */
+ OUT_BYTE(0x80, drive->channel->io_ports[IDE_CONTROL_OFFSET]);
+ ar->hobfile.feature = IN_BYTE(IDE_FEATURE_REG);
+ ata_in_regfile(drive, &ar->hobfile);
+ }
+
+ blkdev_dequeue_request(rq);
+ drive->rq = NULL;
+ end_that_request_last(rq);
+
+ return ret;
+}
+
+int ide_raw_taskfile(struct ata_device *drive, struct ata_taskfile *ar)
{
- struct request rq;
+ struct request req;
+
+ ar->command_type = IDE_DRIVE_TASK_NO_DATA;
+ ar->handler = ata_special_intr;
- memset(&rq, 0, sizeof(rq));
- rq.flags = REQ_DRIVE_ACB;
- rq.special = args;
+ memset(&req, 0, sizeof(req));
+ req.flags = REQ_SPECIAL;
+ req.special = ar;
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ return ide_do_drive_cmd(drive, &req, ide_wait);
}
EXPORT_SYMBOL(drive_is_ready);
+EXPORT_SYMBOL(ide_do_drive_cmd);
EXPORT_SYMBOL(ata_read);
EXPORT_SYMBOL(ata_write);
EXPORT_SYMBOL(ata_taskfile);
-EXPORT_SYMBOL(task_no_data_intr);
-EXPORT_SYMBOL(ide_do_drive_cmd);
+EXPORT_SYMBOL(ata_special_intr);
EXPORT_SYMBOL(ide_raw_taskfile);
diff -urN linux-2.5.20/drivers/ide/ioctl.c linux/drivers/ide/ioctl.c
--- linux-2.5.20/drivers/ide/ioctl.c 2002-06-05 13:06:36.000000000 +0200
+++ linux/drivers/ide/ioctl.c 2002-06-05 02:37:13.000000000 +0200
@@ -34,30 +34,6 @@
#include "ioctl.h"
/*
- * Invoked on completion of a special DRIVE_CMD.
- */
-static ide_startstop_t drive_cmd_intr(struct ata_device *drive, struct request *rq)
-{
- struct ata_taskfile *ar = rq->special;
-
- ide__sti(); /* local CPU only */
- if (!ata_status(drive, 0, DRQ_STAT) && ar->taskfile.sector_number) {
- int retries = 10;
-
- ata_read(drive, rq->buffer, ar->taskfile.sector_number * SECTOR_WORDS);
-
- while (!ata_status(drive, 0, BUSY_STAT) && retries--)
- udelay(100);
- }
-
- if (!ata_status(drive, READY_STAT, BAD_STAT))
- return ata_error(drive, rq, __FUNCTION__); /* already calls ide_end_drive_cmd */
- ide_end_drive_cmd(drive, rq);
-
- return ide_stopped;
-}
-
-/*
* Implement generic ioctls invoked from userspace to imlpement specific
* functionality.
*
@@ -79,7 +55,7 @@
return -EFAULT;
memset(&rq, 0, sizeof(rq));
- rq.flags = REQ_DRIVE_ACB;
+ rq.flags = REQ_SPECIAL;
memset(&args, 0, sizeof(args));
@@ -107,7 +83,7 @@
/* Issue ATA command and wait for completion.
*/
- args.handler = drive_cmd_intr;
+ args.handler = ata_special_intr;
rq.buffer = argbuf + 4;
rq.special = &args;
diff -urN linux-2.5.20/drivers/ide/pcidma.c linux/drivers/ide/pcidma.c
--- linux-2.5.20/drivers/ide/pcidma.c 2002-06-05 13:06:33.000000000 +0200
+++ linux/drivers/ide/pcidma.c 2002-06-05 02:37:13.000000000 +0200
@@ -64,7 +64,7 @@
struct scatterlist *sg = ch->sg_table;
int nents = 0;
- if (rq->flags & REQ_DRIVE_ACB) {
+ if (rq->flags & REQ_SPECIAL) {
struct ata_taskfile *args = rq->special;
#if 1
unsigned char *virt_addr = rq->buffer;
@@ -525,6 +525,7 @@
if (ata_start_dma(drive, rq))
return 1;
+ /* No DMA transfers on ATAPI devices. */
if (drive->type != ATA_DISK)
return 0;
@@ -533,13 +534,8 @@
else
cmd = 0x00;
- ide_set_handler(drive, ide_dma_intr, WAIT_CMD, dma_timer_expiry); /* issue cmd to drive */
- if ((rq->flags & REQ_DRIVE_ACB) && (drive->addressing == 1)) {
- /* FIXME: this should never happen */
- struct ata_taskfile *args = rq->special;
-
- outb(args->cmd, IDE_COMMAND_REG);
- } else if (drive->addressing)
+ ide_set_handler(drive, ide_dma_intr, WAIT_CMD, dma_timer_expiry);
+ if (drive->addressing)
outb(cmd ? WIN_READDMA_EXT : WIN_WRITEDMA_EXT, IDE_COMMAND_REG);
else
outb(cmd ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
diff -urN linux-2.5.20/drivers/ide/tcq.c linux/drivers/ide/tcq.c
--- linux-2.5.20/drivers/ide/tcq.c 2002-06-05 13:06:36.000000000 +0200
+++ linux/drivers/ide/tcq.c 2002-06-05 02:37:13.000000000 +0200
@@ -60,7 +60,9 @@
struct ata_taskfile *args = rq->special;
ide__sti();
- ide_end_drive_cmd(drive, rq);
+ blkdev_dequeue_request(rq);
+ drive->rq = NULL;
+ end_that_request_last(rq);
kfree(args);
return ide_stopped;
@@ -402,18 +404,14 @@
if (drives <= 1)
return 0;
- memset(&args, 0, sizeof(args));
-
- args.taskfile.feature = 0x01;
- args.cmd = WIN_NOP;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
/*
* do taskfile and check ABRT bit -- intelligent adapters will not
* pass NOP with sub-code 0x01 to device, so the command will not
* fail there
*/
+ memset(&args, 0, sizeof(args));
+ args.taskfile.feature = 0x01;
+ args.cmd = WIN_NOP;
ide_raw_taskfile(drive, &args);
if (args.taskfile.feature & ABRT_ERR)
return 1;
@@ -442,9 +440,6 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_WCACHE;
args.cmd = WIN_SETFEATURES;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
if (ide_raw_taskfile(drive, &args)) {
printk("%s: failed to enable write cache\n", drive->name);
return 1;
@@ -457,9 +452,6 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_DIS_RI;
args.cmd = WIN_SETFEATURES;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
if (ide_raw_taskfile(drive, &args)) {
printk("%s: disabling release interrupt fail\n", drive->name);
return 1;
@@ -472,9 +464,6 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_SI;
args.cmd = WIN_SETFEATURES;
- args.handler = task_no_data_intr;
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
-
if (ide_raw_taskfile(drive, &args)) {
printk("%s: enabling service interrupt fail\n", drive->name);
return 1;
diff -urN linux-2.5.20/include/linux/blkdev.h linux/include/linux/blkdev.h
--- linux-2.5.20/include/linux/blkdev.h 2002-06-03 03:44:44.000000000 +0200
+++ linux/include/linux/blkdev.h 2002-06-05 02:39:00.000000000 +0200
@@ -81,13 +81,11 @@
/*
* for ATA/ATAPI devices
*/
- __REQ_DRIVE_ACB,
-
__REQ_PC, /* packet command (special) */
__REQ_BLOCK_PC, /* queued down pc from block layer */
__REQ_SENSE, /* sense retrival */
- __REQ_SPECIAL, /* driver special command (currently reset) */
+ __REQ_SPECIAL, /* driver suplied command */
__REQ_NR_BITS, /* stops here */
};
@@ -100,7 +98,6 @@
#define REQ_STARTED (1 << __REQ_STARTED)
#define REQ_DONTPREP (1 << __REQ_DONTPREP)
#define REQ_QUEUED (1 << __REQ_QUEUED)
-#define REQ_DRIVE_ACB (1 << __REQ_DRIVE_ACB)
#define REQ_PC (1 << __REQ_PC)
#define REQ_BLOCK_PC (1 << __REQ_BLOCK_PC)
#define REQ_SENSE (1 << __REQ_SENSE)
diff -urN linux-2.5.20/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.20/include/linux/ide.h 2002-06-05 13:06:36.000000000 +0200
+++ linux/include/linux/ide.h 2002-06-05 02:40:26.000000000 +0200
@@ -654,11 +654,6 @@
extern int ide_do_drive_cmd(struct ata_device *, struct request *, ide_action_t);
-/*
- * Clean up after success/failure of an explicit drive cmd.
- */
-extern void ide_end_drive_cmd(struct ata_device *, struct request *);
-
struct ata_taskfile {
struct hd_drive_task_hdr taskfile;
struct hd_drive_task_hdr hobfile;
@@ -695,7 +690,7 @@
bio_kunmap_irq(to, flags);
}
-extern ide_startstop_t task_no_data_intr(struct ata_device *, struct request *);
+extern ide_startstop_t ata_special_intr(struct ata_device *, struct request *);
extern int ide_raw_taskfile(struct ata_device *, struct ata_taskfile *);
extern void ide_fix_driveid(struct hd_driveid *id);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Jun 07 2002 - 22:00:24 EST