Hi,
I installed Red Hat 7.3 and the 2.4.18-3 kernel shows some IDE
errors on boot like:
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
I also tried the 2.4.18-4 kernel, but the errors continue. It's
weird cause this happen only on boot and in spite of it the system runs
fine.
I have a SiS 5513 chipset with a QUANTUM FIREBALLlct15 20 IDE
drive.
I'm not sure if I have a true hardware problem or if there is a
bug in the kernel. Any ideas?
(please CC the answers to me)
Thanks,
-- Ulisses
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu May 23 2002 - 22:00:16 EST