Re: IDE hotplug support?

From: Jakob Østergaard (jakob@unthought.net)
Date: Thu May 02 2002 - 18:09:18 EST


On Thu, May 02, 2002 at 03:22:00PM -0700, Jeff Nguyen wrote:
> You can get a sustained read speed of 80MB/s on the Adaptec 2000S
> Zero Channel RAID with 7 drives (RAID-5). But the sustained write
> speed is only around 32MB/s.
>
> On the other hand, the 3Ware Escalade 7850 can sustain a read speed
> of 130MB/s with 8 drives (RAID-5). The write speed is 30MB/s.

So for both cards, the solution with simple IDE controllers, all on
one PCI bus, would be faster not only on RAID-5, but also RAID-1+0.

Or am I missing something ?

(I know, the IDE cabling is going to be *hell* for 15 drives if you
 want to stay within spec, and I would go SCSI or FC before that myself)

-- 
................................................................
:   jakob@unthought.net   : And I see the elder races,         :
:.........................: putrid forms of man                :
:   Jakob Østergaard      : See him rise and claim the earth,  :
:        OZ9ABN           : his downfall is at hand.           :
:.........................:............{Konkhra}...............:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue May 07 2002 - 22:00:17 EST