On Fri, Apr 26, 2002 at 02:17:53PM -0700, Randy.Dunlap wrote:
> On Fri, 26 Apr 2002, Wakko Warner wrote:
>
> | Just bought a maxtor 160gb disk and it shows upt as a 137gb disk. I thought
> | this might be the system board's ide chipset limitation so I put a scsi->ide
> | adapter on the drive. Same situation occurs. I'm looking at what the kernel
> | reports when it finds the drive. /proc/partitions shows this drive as:
> | 8 0 134217727 sda
> | /proc/scsi/scsi shows:
> | Attached devices:
> | Host: scsi0 Channel: 00 Id: 00 Lun: 00
> | Vendor: Maxtor 4 Model: G160J8 Rev: GAK8
> | Type: Direct-Access ANSI SCSI revision: 02
> |
> | I tried kernel 2.4.14 and 2.4.18. Any ideas?
>
> Hi,
>
> There was a thread on this 2-3 months back.
> IDE in 2.4 doesn't have a 48-bit block address interface IIRC,
> although Andre has some patches for this.
> This is necessary to go above 137 GB.
Wasn't some of that merged into one of the early 2.4.19-pre kernels?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Apr 30 2002 - 22:00:13 EST