[BUG] 2.5.10 - kernel hangs after detecting CD/DVD ROM (was: Re: IDE problem: 2.5.10 compiles but hangs during boot)

From: Stephan Maciej (stephan@maciej.muc.de)
Date: Thu Apr 25 2002 - 10:57:07 EST


On Wednesday 24 April 2002 21:53, Mark Orr wrote:
> Linux 2.5.10 compiles but doesnt complete boot due to some IDE
> errors. Previous working kernel was 2.5.8-pre3.

On my system, the bootup hangs completely after the kernel has detected my
CD/DVD ROM. Last working version was 2.5.9. When .9 it comes up, it displays
(dmesg dump, probably non-useful stuff stripped off):

Linux version 2.5.9 (root@maciej) (gcc version 2.95.3 20010315 (SuSE)) #3 Tue
Apr 23 21:54:54 CEST 2002
[...]
Sony Vaio laptop detected.
Kernel command line: auto BOOT_IMAGE=linux-2.5.9 ro root=301
[...]
CPU: AMD Duron(tm) Processor stepping 01
[...]
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
[...]
VIA Technologies, Inc. Bus Master IDE: IDE controller on PCI slot 00:07.1
VIA Technologies, Inc. Bus Master IDE: chipset revision 6
VIA Technologies, Inc. Bus Master IDE: not 100% native mode: will probe irqs
later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23CA-20, ATA DISK drive
hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive

That's the last line I see from a 2.5.10 kernel booting up. 2.5.9 does go
farther:

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide: unexpected interrupt 1 15
ide1 at 0x170-0x177,0x376 on irq 15
ide: unexpected interrupt 0 14
[... and so on...]

No OOPS, no BUG, even not a blinking cursor anymore (vesafb).

Stephan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Apr 30 2002 - 22:00:13 EST