"Unable to reserve I/O region" on tulip network card.

From: Alex Walker (alex@x3ja.co.uk)
Date: Thu Apr 25 2002 - 07:34:45 EST

[Please CC me in replies - not subscribed]

Hiya,

Thanks for the help on the usb OOPSs.

Now I have a problem with my network card in 2.5.10 - I cannot make it
ifup, although the link lights are on. 2.4.18 works fine with the card,
so it's not fitted wrong or anything.

Anyway, the error is as follows:

Linux Tulip driver version 1.1.12 (Mar 07, 2002)
PCI: Could not assign IRQ 21 to device 02:09.0
eth0: Lite-On PNIC-II rev 37 at 0xd4bcec00, 00:C0:F0:76:95:0A, IRQ 21.
PCI: Could not assign IRQ 22 to device 02:0a.0

The relevant part of lspci is:
02:09.0 Ethernet controller: Lite-On Communications INC LNE100TX [Linksys EtherFast 10/100] (rev 25)

I have tried compiling the tulip driver in and having it as a module,
but with the same results.

Attached are my config, and the log of bootup, with a bit of fiddling
with loading and unloading the module at the end.

Thankyou for serial consoles so I don't have to copy all the info by
hand!

Any more info needed, just ask.

Alex. 

-- 
\\\\\\\\               Getting into trouble is easy.                ////////
\\\\\\                   -- D. Winkel and F. Prosser                  //////
\\\\                                                                    ////
\\                                                                        //
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Tue Apr 30 2002 - 22:00:10 EST