IDE problem: 2.5.10 compiles but hangs during boot

From: Mark Orr (markorr@intersurf.com)
Date: Wed Apr 24 2002 - 14:53:15 EST


System: Pentium 100, 16mb, Neptune II chipset w/ RZ1000 IDE
         WD Caviar 2540 (540mb) HD, NEC-260 IDE CD
         
Linux 2.5.10 compiles but doesnt complete boot due to some IDE
errors. Previous working kernel was 2.5.8-pre3.

relevant bits from the boot messages:

---
ide0: disable chipset read-ahead (buggy RZ1000/RZ1001)
ide1: disable chipset read-ahead (buggy RZ1000/RZ1001)
hda: WDC AC2540H, ATA disk drive
hdc: NEC CD-ROM DRIVE:260, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide: unexpected interrupt 1 15
ide1 at 0x170-0x177,0x376 on irq 15
hda: 1056384 sectors (541Mb) w/128Kib cache CHS=1048/16/63
Partition check:
  hda: [PTBL] [524/32/64] hda1 hda2 hda3

(...some network stuff, then it runs fsck)

remounting root device with read-write enabled. hda: task_mulout_intr: status=0x65 { DriveReady DriveFault CorrectedError Error} hda: task_mulout_intr: error=0x04 {DriveStatusError} ide: unexpected interrupt 0 14 ide0: reset: success

...and there it stops. --

My kernel configuration is default, except IDE CDROM is modularized.

After receiving this error, I went back and disabled CMD640 and Generic PCI IDE support - which has compiled and worked in the past, but it doesnt compile with this kernel version:

make[3]: Entering directory `/usr/src/linux/drivers/ide' gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i586 -DKBUILD_BASENAME=ide -DEXPORT_SYMTAB -c ide.c In file included from /usr/src/linux/include/linux/ide.h:238, from ide.c:138: /usr/src/linux/include/asm/ide.h: In function `ide_init_default_hwifs': /usr/src/linux/include/asm/ide.h:84: warning: implicit declaration of function `ide_register_hw' ide.c: In function `ide_unregister': ide.c:2300: structure has no member named `pci_dev' ide.c: In function `ide_teardown_commandlist': ide.c:2845: structure has no member named `pci_dev' make[3]: *** [ide.o] Error 1 make[3]: Leaving directory `/usr/src/linux/drivers/ide' make[2]: *** [first_rule] Error 2 make[2]: Leaving directory `/usr/src/linux/drivers/ide' make[1]: *** [_subdir_ide] Error 2 make[1]: Leaving directory `/usr/src/linux/drivers' make: *** [_dir_drivers] Error 2

-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Apr 30 2002 - 22:00:10 EST