Re: Trouble rebooting Tyan Thunder K7 (S2462UNG)

From: Jan-Benedict Glaw (jbglaw@lug-owl.de)
Date: Mon Apr 22 2002 - 08:54:29 EST


On Mon, 2002-04-22 09:23:11 -0400, Nicholas Berry <nikberry@med.umich.edu>
wrote in message <scc3ce39.035@mail-01.med.umich.edu>:
> I've had the original problem with a Tyan Tiger MP board. Linux can't
> reboot it, Windoze 2000 can, but in my case the font is screwed up. I
> agree with Steve, it's a BIOS problem - the BIOS on my board is a POS.

Here are my 2 cent:

        - The BIOS screws up (at least) ATI Radeon cards (their fonts)
        - The newest versions (at least 2.09 and 2.10) require to press
          F1 if you use non-MP Athlons
        - The newest BIOS version (2.10) does __not__ mention a second
          CPU in the MP table if you use non-MP Athlons. This means that
          basically the board unconditionally boots up with only __one__
          CPU, even if you press F1 to accept a non-supported mode.
        - I've added an additional SCSI card. The box didn't come up
          because this additional card was bootable. I had to remove the
          boot ROM of that card.

My conclusions:

        - Basically, the board is *very* nice. Two Athlons, two U/160
          SCSI channels, lots of ECC-protected RAM.
        - BIOS is quite bad. It feels like being unready and is quite
          unfriendly to not officially supported (non-MP) dual Athlons.
          Despite that, there are problems with lots of other hardware
          (ATI Radeon cards, additional bootable SCSI cards, ...).

MfG, JBG

-- 
Jan-Benedict Glaw   .   jbglaw@lug-owl.de   .   +49-172-7608481
	 -- New APT-Proxy written in shell script --
	   http://lug-owl.de/~jbglaw/software/ap2/


- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Apr 23 2002 - 22:00:31 EST