[PATCH] Via-rhine minor issues

From: Ivan G. (ivangurdiev@yahoo.com)
Date: Sun Apr 21 2002 - 02:02:20 EST


Please comment on this before I send to Marcello.
I am a newbie and would like some help.
Patch fixes minor issues in the driver.

Note: Shing Chuang, this includes your own patch for Rhine-III support
since it's not yet in the kernel and I diff-ed against the original source,
while I added your patch to my driver version.

BTW your own patch wouldn't patch cleanly for some reason.

DIFF-ED AGAINST:
2.4.19-pre3 ( I don't think there were changes to via-rhine
b-ween pre3 and pre7)

CONTENTS:
- Shing Chuang's Rhine III support and 6100 cleanup patch.
- edited comments on supported cards
- removed unused W_MAX_TIMEOUT
- added flag HasDavicomPhy for VT86C100A card
- changed chip_id in wait_for_reset as parameter since np is not initialized
the first time this function is called (should this be fixed differently?)
- enable all interrupts (add 4 additional ones)
- fix debug message - frame is off by one
- change "Something Wicked" message to "PCI Error" (I still don't see the
purpose of the trap)

NOTE:
Urban, this should clear up the annoying minor issues so I can do more tests
on my own delay problem (Via-Rhine stalls on transmit thread)

PATCH: (watch out for kmail newlines on several places)

--- via-rhine.c.origkernel Sat Mar 30 01:10:02 2002
+++ via-rhine.c Sun Apr 21 00:30:34 2002
@@ -9,8 +9,8 @@
        a complete program and may only be used when the entire operating
        system is licensed under the GPL.

- This driver is designed for the VIA VT86c100A Rhine-II PCI Fast
Ethernet
- controller. It also works with the older 3043 Rhine-I chip.
+ This driver is designed for the VIA VT86C100A Rhine-I.
+ It also works with the 6102 Rhine-II, and 6105/6105M Rhine-III.

        The author may be reached as becker@scyld.com, or C/O
        Scyld Computing Corporation
@@ -136,9 +136,6 @@

 #define PKT_BUF_SZ 1536 /* Size of each
temporary Rx buffer.*/

-/* max time out delay time */
-#define W_MAX_TIMEOUT 0x0FFFU
-
 #if !defined(__OPTIMIZE__) || !defined(__KERNEL__)
 #warning You must compile this file with the correct options!
 #warning See the last lines of the source file.
@@ -317,7 +314,8 @@
 enum via_rhine_chips {
        VT86C100A = 0,
        VT6102,
- VT3043,
+ VT6105,
+ VT6105M
 };

 struct via_rhine_chip_info {
@@ -342,18 +340,21 @@
 static struct via_rhine_chip_info via_rhine_chip_info[] __devinitdata =
 {
        { "VIA VT86C100A Rhine", RHINE_IOTYPE, 128,
- CanHaveMII | ReqTxAlign },
+ CanHaveMII | ReqTxAlign | HasDavicomPhy },
        { "VIA VT6102 Rhine-II", RHINE_IOTYPE, 256,
          CanHaveMII | HasWOL },
- { "VIA VT3043 Rhine", RHINE_IOTYPE, 128,
- CanHaveMII | ReqTxAlign }
+ { "VIA VT6105 Rhine-III", RHINE_IOTYPE, 256,
+ CanHaveMII | HasWOL },
+ { "VIA VT6105M Rhine-III", RHINE_IOTYPE, 256,
+ CanHaveMII | HasWOL },
 };

 static struct pci_device_id via_rhine_pci_tbl[] __devinitdata =
 {
- {0x1106, 0x6100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VT86C100A},
+ {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VT86C100A},
        {0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VT6102},
- {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VT3043},
+ {0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VT6105},
+ {0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VT6105M},
        {0,} /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, via_rhine_pci_tbl);
@@ -502,15 +503,13 @@
 static int via_rhine_close(struct net_device *dev);
 static inline void clear_tally_counters(long ioaddr);

-static void wait_for_reset(struct net_device *dev, char *name)
+static void wait_for_reset(struct net_device *dev, int chip_id, char *name)
 {
- struct netdev_private *np = dev->priv;
        long ioaddr = dev->base_addr;
- int chip_id = np->chip_id;
        int i;

- /* 3043 may need long delay after reset (dlink) */
- if (chip_id == VT3043 || chip_id == VT86C100A)
+ /* VT86C100A may need long delay after reset (dlink) */
+ if (chip_id == VT86C100A)
                udelay(100);

        i = 0;
@@ -531,7 +530,7 @@
 static void __devinit enable_mmio(long ioaddr, int chip_id)
 {
        int n;
- if (chip_id == VT3043 || chip_id == VT86C100A) {
+ if (chip_id == VT86C100A) {
                /* More recent docs say that this bit is reserved ... */
                n = inb(ioaddr + ConfigA) | 0x20;
                outb(n, ioaddr + ConfigA);
@@ -659,7 +658,7 @@
        writew(CmdReset, ioaddr + ChipCmd);

        dev->base_addr = ioaddr;
- wait_for_reset(dev, shortname);
+ wait_for_reset(dev, chip_id, shortname);

        /* Reload the station address from the EEPROM. */
 #ifdef USE_IO
@@ -980,7 +979,8 @@

        /* Enable interrupts by setting the interrupt mask. */
        writew(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow|
IntrRxDropped|
- IntrTxDone | IntrTxAbort | IntrTxUnderrun |
+ IntrRxEarly | IntrRxNoBuf | IntrRxWakeUp | IntrTxAborted|
+ IntrTxDone | IntrTxAbort | IntrTxUnderrun |
                   IntrPCIErr | IntrStatsMax | IntrLinkChange | IntrMIIChange,
                   ioaddr + IntrEnable);

@@ -1070,7 +1070,7 @@
                return i;
        alloc_rbufs(dev);
        alloc_tbufs(dev);
- wait_for_reset(dev, dev->name);
+ wait_for_reset(dev, np->chip_id, dev->name);
        init_registers(dev);
        if (debug > 2)
                printk(KERN_DEBUG "%s: Done via_rhine_open(), status %4.4x "
@@ -1177,7 +1177,7 @@
        alloc_rbufs(dev);

        /* Reinitialize the hardware. */
- wait_for_reset(dev, dev->name);
+ wait_for_reset(dev, np->chip_id, dev->name);
        init_registers(dev);

        spin_unlock(&np->lock);
@@ -1247,7 +1247,7 @@

        if (debug > 4) {
                printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot
%d.\n",
- dev->name, np->cur_tx, entry);
+ dev->name, np->cur_tx-1, entry);
        }
        return 0;
 }
@@ -1498,12 +1498,11 @@
                        printk(KERN_INFO "%s: Transmitter underrun,
increasing Tx "
                                   "threshold setting to %2.2x.\n",
dev->name, np->tx_thresh);
        }
- if ((intr_status & ~( IntrLinkChange | IntrStatsMax |
- IntrTxAbort |
IntrTxAborted))) {
+ if (intr_status & IntrPCIErr) {
                if (debug > 1)
- printk(KERN_ERR "%s: Something Wicked happened!
%4.4x.\n",
+ printk(KERN_ERR "%s: PCI Error! %4.4x.\n",
                           dev->name, intr_status);
- /* Recovery for other fault sources not known. */
+ /* Recovery for PCI Error. */
                writew(CmdTxDemand | np->chip_cmd, dev->base_addr + ChipCmd);
        }

 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Apr 23 2002 - 22:00:28 EST