On Wed, 27 Mar 2002, Maciej W. Rozycki wrote:
> You can't use a vector that is in the range assigned to I/O APIC
> interrupts (i.e. 0x31 - 0xee). Otherwise you'll get an overlap when the
> vector gets assigned to an ordinary IRQ line. Also you probably want a
Thanks, i'll fix that.
> high-priority interrupt as the condition is serious, if not critical --
> system failures, such as bus exceptions, machine check faults, parity
> errors, power failures, etc. demand a high priority service.
Its really not that critical, its more informational, the interrupt
handler in fact only displays a warning, by which time the hardware is
already handling the condition.
Thanks for the input.
Zwane
-- http://function.linuxpower.ca- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Mar 31 2002 - 22:00:13 EST