Hi
we have 2 nearly identical servers each with the D-Link DGE-550T
Adapter, one has no problems, the other constantly reports the error
below:
D-Link DL2000-based linux driver v1.08 2002/01/17
eth2: D-Link DGE-550T Gigabit Ethernet Adapter, 00:05:5d:f9:2b:8a, IRQ 9
Auto 1000 Mbps, Full duplex
Enable Tx Flow Control
Enable Rx Flow Control
eth2: HostError! IntStatus 0002.
we have tried the driver at 100Mbps half & full duplex, with & without
Flow controls
and we have also tried the 1.04 (2.4.17) and the RH 7.2 stock kernel
(its "PCI Error! IntStatus 0002" with the older drivers)
we have several other card in the machine, such as an Adaptec 2100A raid
5 card and a 3c980 Nic, these are fine
to be honest Im not sure if this is a pci bus problem or a driver one.
is there any other information that would help?
any commentsor pointers would be a great help
TIA
Cheers carl
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jan 31 2002 - 21:01:37 EST