Re: HPT370 controller set wrong udma mode

From: Oliver Feiler (kiza@gmxpro.net)
Date: Thu Jan 10 2002 - 12:48:22 EST

Next message: salvador: "[PATCH][RFC/A][2] Sound: adding /proc/driver/{vendor}/{dev_pci}/ac97 entry for trident driver"
Previous message: H. Peter Anvin: "Re: initramfs programs (was [RFC] klibc requirements)"
In reply to: Alan Cox: "Re: HPT370 controller set wrong udma mode"
Next in thread: Duncan Laurie: "Re: HPT370 controller set wrong udma mode"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Alan Cox wrote:

> Make sure you use the Andre Hedrick ide patches with the HPT 370. That fixed
> all my problems with them at least
> (http://www.linux-ide.org)

Didn't solve my problem unfortunately.

With the patch applied, the kernel still says it uses UDMA(66) on boot
and hdparm also says the drive is in udma4 mode. Writing data to it results in
BadCRC.
However, /proc/ide/hpt366 with the patch applied shows ATA-33 mode.
Something's wrong here.

CC'ing this to Andre Hedrick. Maybe he knows what's wrong?

Bye

Oliver

-- 
Oliver Feiler                                               kiza@gmx.net
http://www.lionking.org/~kiza/pgpkey              PGP key ID: 0x561D4FD2
http://www.lionking.org/~kiza/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: salvador: "[PATCH][RFC/A][2] Sound: adding /proc/driver/{vendor}/{dev_pci}/ac97 entry for trident driver"
Previous message: H. Peter Anvin: "Re: initramfs programs (was [RFC] klibc requirements)"
In reply to: Alan Cox: "Re: HPT370 controller set wrong udma mode"
Next in thread: Duncan Laurie: "Re: HPT370 controller set wrong udma mode"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Tue Jan 15 2002 - 21:00:32 EST