* Phil Sorber (aafes@psu.edu) wrote:
> hello,
>
> i have an HP Procurve 4000M and a linux box with an Intel Pro/100 Dual
> Port Server Adapter (eepro.c). we have the switch set to do cicso
> etherchannel, which the procurve supports. but it seems not to work in
> this mode. we have to back down to trunking mode, giving us 200Mbit
> upstream, but only 100Mbit down stream.
>
> I was curious if it had been tested with any HP switches, or any non
> cisco switches for that matter that support cisco etherchannel. i was
> also wondering if this is not the case if anyone has written a patch, or
> is planning to write one to correct this.
>
> if not, me and my colleague and i are willing to take a crack at it.
> however we have limited experience at something like this, but are eager
> to get into it.
>
> any help or direction is apreciated. thanx.
>
> --
> Phil Sorber
> AIM: PSUdaemon
> IRC: irc.openprojects.net #psulug PSUdaemon
> GnuPG: keyserver - pgp.mit.edu
I thought only the 8000M could do etherchannel.
-- Jason Cook | GnuPG Fingerprint: D531 F4F4 BDBF 41D1 514D GNU/Linux Technical Lead | F930 FD03 262E 5120 BEDD evolServ Technology | Home page: http://reinit.orgUm, it's like, uh ... did anyone see the movie ron'? -- Homer Simpson
This archive was generated by hypermail 2b29 : Thu Nov 15 2001 - 21:00:24 EST