Only in linux-2.4.14/drivers/usb/storage: CVS
diff -u linux-2.4.14/drivers/usb/storage.old/freecom.c linux-2.4.14/drivers/usb/storage/freecom.c
--- linux-2.4.14/drivers/usb/storage.old/freecom.c	Sun Jul 29 21:11:50 2001
+++ linux-2.4.14/drivers/usb/storage/freecom.c	Sun Nov  4 05:01:17 2001
@@ -1,6 +1,6 @@
 /* Driver for Freecom USB/IDE adaptor
  *
- * $Id: freecom.c,v 1.15 2001/06/27 23:50:28 mdharm Exp $
+ * $Id: freecom.c,v 1.18 2001/11/04 13:01:17 mdharm Exp $
  *
  * Freecom v0.1:
  *
@@ -132,6 +132,12 @@
 		sg = (struct scatterlist *) srb->request_buffer;
 		for (i = 0; i < srb->use_sg; i++) {
 
+			US_DEBUGP("transfer_amount: %d and total_transferred: %d\n", transfer_amount, total_transferred);
+
+			/* End this if we're done */
+			if (transfer_amount == total_transferred)
+				break;
+
 			/* transfer the lesser of the next buffer or the
 			 * remaining data */
 			if (transfer_amount - total_transferred >= 
@@ -139,10 +145,12 @@
 				result = usb_stor_transfer_partial(us,
 						sg[i].address, sg[i].length);
 				total_transferred += sg[i].length;
-			} else
+			} else {
 				result = usb_stor_transfer_partial(us,
 						sg[i].address,
 						transfer_amount - total_transferred);
+				total_transferred += transfer_amount - total_transferred;
+			}
 
 			/* if we get an error, end the loop here */
 			if (result)
@@ -158,7 +166,7 @@
 	srb->result = result;
 }
 
-
+#if 0
 /* Write a value to an ide register. */
 static int
 freecom_ide_write (struct us_data *us, int reg, int value)
@@ -255,6 +263,7 @@
 
         return USB_STOR_TRANSPORT_GOOD;
 }
+#endif
 
 static int
 freecom_readdata (Scsi_Cmnd *srb, struct us_data *us,
@@ -470,13 +479,15 @@
         US_DEBUGP("Device indicates that it has %d bytes available\n",
                         le16_to_cpu (fst->Count));
 
-        /* Find the length we desire to read.  It is the lesser of the SCSI
-         * layer's requested length, and the length the device claims to
-         * have available. */
+        /* Find the length we desire to read. */
         length = usb_stor_transfer_length (srb);
         US_DEBUGP("SCSI requested %d\n", length);
-        if (length > le16_to_cpu (fst->Count))
-                length = le16_to_cpu (fst->Count);
+
+	/* verify that this amount is legal */
+	if (length > srb->request_bufflen) {
+		length = srb->request_bufflen;
+		US_DEBUGP("Truncating request to match buffer length: %d\n", length);
+	}
 
         /* What we do now depends on what direction the data is supposed to
          * move in. */
@@ -522,7 +533,6 @@
                 if (result != USB_STOR_TRANSPORT_GOOD)
                         return result;
 
-#if 1
                 US_DEBUGP("FCM: Waiting for status\n");
                 result = usb_stor_bulk_msg (us, fst, ipipe,
                                 FCM_PACKET_LENGTH, &partial);
@@ -540,7 +550,7 @@
                         US_DEBUGP("Drive seems still hungry\n");
                         return USB_STOR_TRANSPORT_FAILED;
                 }
-#endif
+
                 US_DEBUGP("Transfer happy\n");
                 break;
 
@@ -570,8 +580,7 @@
 int
 freecom_init (struct us_data *us)
 {
-        int result, value;
-        int counter;
+        int result;
 	char buffer[33];
 
         /* Allocate a buffer for us.  The upper usb transport code will
@@ -591,42 +600,29 @@
 	buffer[32] = '\0';
 	US_DEBUGP("String returned from FC init is: %s\n", buffer);
 
-        result = freecom_ide_write (us, 0x06, 0xA0);
-        if (result != USB_STOR_TRANSPORT_GOOD)
-                return result;
-        result = freecom_ide_write (us, 0x01, 0x00);
-        if (result != USB_STOR_TRANSPORT_GOOD)
-                return result;
-
-        counter = 50;
-        do {
-                result = freecom_ide_read (us, 0x07, &value);
-                if (result != USB_STOR_TRANSPORT_GOOD)
-                        return result;
-                if (counter-- < 0) {
-                        US_DEBUGP("Timeout in freecom");
-                        return USB_STOR_TRANSPORT_ERROR;
-                }
-        } while ((value & 0x80) != 0);
+	/* Special thanks to the people at Freecom for providing me with
+	 * this "magic sequence", which they use in their Windows and MacOS
+	 * drivers to make sure that all the attached perhiperals are
+	 * properly reset.
+	 */
 
-        result = freecom_ide_write (us, 0x07, 0x08);
-        if (result != USB_STOR_TRANSPORT_GOOD)
-                return result;
-
-        counter = 50;
-        do {
-                result = freecom_ide_read (us, 0x07, &value);
-                if (result != USB_STOR_TRANSPORT_GOOD)
-                        return result;
-                if (counter-- < 0) {
-                        US_DEBUGP("Timeout in freecom");
-                        return USB_STOR_TRANSPORT_ERROR;
-                }
-        } while ((value & 0x80) != 0);
+	/* send reset */
+	result = usb_control_msg(us->pusb_dev,
+			usb_sndctrlpipe(us->pusb_dev, 0),
+			0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
+	US_DEBUGP("result from activate reset is %d\n", result);
+
+	/* wait 250ms */
+	mdelay(250);
+
+	/* clear reset */
+	result = usb_control_msg(us->pusb_dev,
+			usb_sndctrlpipe(us->pusb_dev, 0),
+			0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
+	US_DEBUGP("result from clear reset is %d\n", result);
 
-        result = freecom_ide_write (us, 0x08, 0x08);
-        if (result != USB_STOR_TRANSPORT_GOOD)
-                return result;
+	/* wait 3 seconds */
+	mdelay(3 * 1000);
 
         return USB_STOR_TRANSPORT_GOOD;
 }
diff -u linux-2.4.14/drivers/usb/storage.old/scsiglue.c linux-2.4.14/drivers/usb/storage/scsiglue.c
--- linux-2.4.14/drivers/usb/storage.old/scsiglue.c	Tue Sep 18 14:10:43 2001
+++ linux-2.4.14/drivers/usb/storage/scsiglue.c	Mon Oct 15 00:02:32 2001
@@ -1,7 +1,7 @@
 /* Driver for USB Mass Storage compliant devices
  * SCSI layer glue code
  *
- * $Id: scsiglue.c,v 1.22 2001/09/02 04:29:27 mdharm Exp $
+ * $Id: scsiglue.c,v 1.23 2001/10/15 07:02:32 mdharm Exp $
  *
  * Current development and maintenance by:
  *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
diff -u linux-2.4.14/drivers/usb/storage.old/sddr09.c linux-2.4.14/drivers/usb/storage/sddr09.c
--- linux-2.4.14/drivers/usb/storage.old/sddr09.c	Sun Nov  4 09:31:57 2001
+++ linux-2.4.14/drivers/usb/storage/sddr09.c	Mon Nov  5 19:18:36 2001
@@ -1,6 +1,6 @@
 /* Driver for SanDisk SDDR-09 SmartMedia reader
  *
- * $Id: sddr09.c,v 1.19 2001/09/02 06:07:20 mdharm Exp $
+ * $Id: sddr09.c,v 1.21 2001/11/06 03:18:36 mdharm Exp $
  *
  * SDDR09 driver v0.1:
  *
diff -u linux-2.4.14/drivers/usb/storage.old/transport.c linux-2.4.14/drivers/usb/storage/transport.c
--- linux-2.4.14/drivers/usb/storage.old/transport.c	Fri Sep 14 14:04:07 2001
+++ linux-2.4.14/drivers/usb/storage/transport.c	Mon Oct 15 00:02:32 2001
@@ -1,6 +1,6 @@
 /* Driver for USB Mass Storage compliant devices
  *
- * $Id: transport.c,v 1.40 2001/08/18 08:37:46 mdharm Exp $
+ * $Id: transport.c,v 1.41 2001/10/15 07:02:32 mdharm Exp $
  *
  * Current development and maintenance by:
  *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
diff -u linux-2.4.14/drivers/usb/storage.old/usb.c linux-2.4.14/drivers/usb/storage/usb.c
--- linux-2.4.14/drivers/usb/storage.old/usb.c	Fri Sep 14 14:04:07 2001
+++ linux-2.4.14/drivers/usb/storage/usb.c	Mon Oct 15 00:02:33 2001
@@ -1,6 +1,6 @@
 /* Driver for USB Mass Storage compliant devices
  *
- * $Id: usb.c,v 1.67 2001/07/29 23:41:52 mdharm Exp $
+ * $Id: usb.c,v 1.68 2001/10/15 07:02:33 mdharm Exp $
  *
  * Current development and maintenance by:
  *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)