Hi!
I have the following problem:
kernel 2.4.12, md and raid1 compiled into the kernel.
/dev/hdb old linux installation
/dev/md0 -> /dev/hde1,/dev/hdg1 new installation
When I boot my old installation the md device is automatically configured
by the kernel and I can mount it (reiserfs) without any problems.
When I try to boot the new installation with the same kernel the md device
is initialized, but the kernel cannot mount the root device. I get msgs
about FAT problems and about mounting root as msdos.
Here some config files:
lilo.conf:
image = /boot/lx-2.4.12
root = /dev/hdb1
label = old
image = /boot/lx-2.4.12
root = /dev/md0
label = new
optional
Thanks a lot for any information
Best wishes
Norbert
-----------------------------------------------------------------------
Norbert Preining <preining@logic.at>
University of Technology Vienna, Austria gpg DSA: 0x09C5B094
-----------------------------------------------------------------------
LOUTH (n.)
The sort of man who wears loud check jackets, has a personalised
tankard behind the bar and always gets served before you do.
--- Douglas Adams, The Meaning of Liff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Oct 23 2001 - 21:00:19 EST