Linux version 2.4.11-xfs (root@intolerance) (gcc version 2.95.4 20011006 (Debian prerelease)) #1 Wed Oct 10 19:34:44 CDT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 131052 zone(0): 4096 pages. zone(1): 126956 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=Linux ro root=803 Initializing CPU#0 Detected 803.413 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1602.35 BogoMIPS Memory: 512968k/524208k available (1777k kernel code, 10852k reserved, 411k data, 216k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf08f0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:04.0 PCI: Found IRQ 9 for device 00:0e.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.08 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd devfs: v0.117 (20010927) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS with ACLs, EAs, DMAPI, realtime, no debug enabled parport_pc: Via 686A parallel port disabled in BIOS pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled Real Time Clock Driver v1.10e block: 128 slots per queue, batch=16 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 21 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) hda: CR-2801TE, ATAPI CD/DVD-ROM drive hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive hdc: Maxtor 53073U6, ATA DISK drive hdd: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdc: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=59554/16/63 ide-floppy driver 0.97.sv hdb: 98304kB, 196608 blocks, 512 sector size hdb: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm Partition check: /dev/ide/host0/bus0/target1/lun0: p1 /dev/ide/host0/bus1/target0/lun0: [PTBL] [14888/64/63] p1 p2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Enabling device 00:0e.0 (0000 -> 0001) PCI: Found IRQ 9 for device 00:0e.0 eth0: RealTek RTL-8029 found at 0xb400, IRQ 9, 00:00:21:48:78:A6. Linux video capture interface: v1.00 ide-floppy driver 0.97.sv SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 11 for device 00:0d.0 PCI: Sharing IRQ 11 with 01:00.0 sym53c8xx: at PCI bus 0, device 13, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c875 detected with Tekram NVRAM sym53c875-0: rev 0x3 on pci bus 0 device 13 function 0 irq 11 sym53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking scsi0 : sym53c8xx-1.7.3c-20010512 Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MITSUMI Model: CR-2801TE Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-M1212 Rev: 1L10 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sym53c875-0-<0,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15) SCSI device sda: 8386733 512-byte hdwr sectors (4294 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi1, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 10 for device 00:04.2 PCI: Sharing IRQ 10 with 00:04.3 uhci.c: USB UHCI at I/O 0xd400, IRQ 10 usb.c: new USB bus registered, assigned bus number 1 usb: raced timeout, pipe 0x80000000 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 hub.c: USB hub found usb: raced timeout, pipe 0x80000180 status 0 time left 0 hub.c: 2 ports detected usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 PCI: Found IRQ 10 for device 00:04.3 PCI: Sharing IRQ 10 with 00:04.2 uhci.c: USB UHCI at I/O 0xd000, IRQ 10 usb.c: new USB bus registered, assigned bus number 2 usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000000 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 hub.c: USB new device connect on bus1/2, assigned device number 2 hub.c: USB hub found hub.c: 5 ports detected usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 hub.c: USB new device connect on bus1/2/1, assigned device number 3 usb.c: USB device 3 (vend/prod 0x46d/0xc00b) is not claimed by any active driver. hub.c: USB new device connect on bus1/2/5, assigned device number 4 usb.c: USB device 4 (vend/prod 0x403/0x8401) is not claimed by any active driver. usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 hub.c: USB hub found usb: raced timeout, pipe 0x80000180 status 0 time left 0 hub.c: 2 ports detected usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. LVM version 0.9.1_beta6 by Heinz Mauelshagen (12/03/2001) lvm -- Driver successfully initialized NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack (4095 buckets, 32760 max) ip_tables: (c)2000 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver NET4: Linux IPX 0.47 for NET4.0 IPX Portions Copyright (c) 1995 Caldera, Inc. IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 216k freed usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 Adding Swap: 61840k swap-space (priority -1) usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Trying generic Via routines for device id: 0605 agpgart: AGP aperture is 64M @ 0xf8000000 [drm] AGP 0.99 on VIA @ 0xf8000000 64MB [drm] Initialized mga 3.0.2 20010321 on minor 0 Creative EMU10K1 PCI Audio Driver, version 0.16, 19:42:30 Oct 10 2001 PCI: Enabling device 00:10.0 (0004 -> 0005) PCI: Assigned IRQ 5 for device 00:10.0 emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xb000-0xb01f, IRQ 5 ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708) usb.c: registered new driver hid input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:3.0 input1: USB HID v1.00 Keyboard [FTDI PS/2 Keyboard And Mouse I/F] on usb1:4.0 input2: USB HID v1.00 Mouse [FTDI PS/2 Keyboard And Mouse I/F] on usb1:4.1 hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers usb.c: registered new driver usb_mouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver mice: PS/2 mouse device common for all mice usb: raced timeout, pipe 0x80000100 status 0 time left 0 XFS mounting filesystem sd(8,1) usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000100 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 usb: raced timeout, pipe 0x80000180 status 0 time left 0 eth0: no IPv6 routers present