>Unlike 2.4.2, 2.4.10 can automatically detect and configure PCI modems.
>That's why its already in use to setserial. The kernel has already
>found your modem, and assigned it ttyS4 (0-3 are reserved for the
>standard COM1-4). Theoretically, then, all you have to do is relink
>/dev/modem to /dev/ttyS4, and you should be set.
That is exactly what it turned out to be. Tnx. Works fine now.
>If you had read through 'dmesg', and the problem if what I suspect it
>is, you would have seen this pretty obviously.
I looked in dmesg and there it was, now that I know what to look for.
I also found a "redundant entry in serial pci_table" message and will
be sending the requested message off to serial-pci-info@lists.sourceforge.net.
---pd - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Oct 15 2001 - 21:00:52 EST