Re: Ethernet Error Correction

From: Vojtech Pavlik (vojtech@suse.cz)
Date: Tue Oct 02 2001 - 04:55:31 EST


On Tue, Oct 02, 2001 at 11:48:01AM +0200, Pavel Machek wrote:
> Hi!
>
> > > > Also, generic PROMISC mode still drops off received frames
> > > > with CRC error.
> > >
> > > Hmm, sounds good. Someone should create tool for communication over
> > > ethernet with broken crc's. Such communication would be stealth from
> > > normal tcpdump. Do it on your provider's network to escape accounting ;^)
> >
> > But still you'll see the number of errors on your eth card
> > skyrocketing, so you'd grow quite suspicious.
>
> Yep, but it would be _very_ hard for you to find the cause. You'd
> probably chase ghosts trying to replace cables, etc, never finding
> what happens.

Well, if you checked all the cables, you'd most likely find the device
capable of sending the bad CRC frames. Also, if you use a switch (not ha
hub or coax), it won't work at all.

-- 
Vojtech Pavlik
SuSE Labs
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Oct 07 2001 - 21:00:18 EST