Re: RAID5: mkraid --force /dev/md0 doesn't work properly

From: Peter Svensson (petersv@psv.nu)
Date: Mon Oct 01 2001 - 02:36:48 EST


On Mon, 1 Oct 2001, Evan Harris wrote:

>
> md0 : active raid5 sde1[6] sdi1[5] sdh1[4] sdg1[3] sdf1[2] sdd1[0]
> 179203840 blocks level 5, 256k chunk, algorithm 0 [6/5] [U_UUUU]
> [=>...................] recovery = 8.4% (3023688/35840768)
> finish=88.9min speed=6148K/sec
>
> Now, my question is: the hotadd seems to have reordered the disks, so when
> the rebuild is completed, do I need to reorder my raidtab to reflect this?
> Like this?

Once the resync has completed the hotadded disk will drop into its slot.
Ie there is no need to change the numbers in /etc/raidtab, they wil be
correct once the array has recovered.

Peter

--
Peter Svensson      ! Pgp key available by finger, fingerprint:
<petersv@psv.nu>    ! 8A E9 20 98 C1 FF 43 E3  07 FD B9 0A 80 72 70 AF
------------------------------------------------------------------------
Remember, Luke, your source will be with you... always...

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Oct 07 2001 - 21:00:13 EST