[Moving from private mail to linux-kernel]
On Thu, Sep 06, 2001 at 08:25:36PM +0200, thunder7@xs4all.nl wrote:
> You have missed something all right. In the later kernels, the output of
> 'dmesg' mentions:
>
> PCI: Probing PCI hardware
[snip]
> PCI: Enabling Via external APIC routing
> PCI: Via IRQ fixup for 00:07.2, from 9 to 3
> PCI: Via IRQ fixup for 00:07.3, from 9 to 3
>
> Those last 2 lines are the ones that are new (since 2.4.5 or so, I guess
> - it was back in June, anyway)
Hrm. Depending on what I enable in the BIOS, I do get similar lines,
but even then my USB controller doesn't work. On the current boot for
example, I have
PCI: Enabling Via external APIC routing
PCI: Via IRQ fixup for 00:07.2, from 9 to 3
and the usb-uhci driver shows up in /proc/interrupts:
CPU0 CPU1
0: 384195 341825 IO-APIC-edge timer
1: 4166 4032 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
9: 0 0 XT-PIC acpi
12: 39181 39875 IO-APIC-edge PS/2 Mouse
14: 5362 5509 IO-APIC-edge ide0
15: 0 0 IO-APIC-edge ide1
17: 13441 13344 IO-APIC-level eth0
18: 284 304 IO-APIC-level es1371
19: 0 0 IO-APIC-level usb-uhci
NMI: 0 0
LOC: 725968 725967
ERR: 0
MIS: 0
But there are still no interrupts getting from the USB controller to
the CPU. I get the standard
hub.c: port 1 connection change
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 3, 12 Mb/s
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 2
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
and /proc/interrupts continues to show 0 interrupts on line 19.
If I switch back to MPS1.1, the USB controller moves to IRQ 9 (shared
with the acpi controller) but the behavior is the same. If I toggle
"PnP OS" in the BIOS, I see no relevant differences. I've tried turning
off and on just about everything of relevance; no change.
Booting a non-APIC kernel makes it work, of course.
The system is a Tyan Tiger 133A, Via Apollo Pro 133A chipset, SMP,
currently running 2.4.9. Complete dmesg, lspci -vvvvxxxx, and
/proc/interrupts are at
http://web.hexapodia.org/~adi/straum/usb/
Thanks for any help. Feel free to CC me on replies; I am on the list,
but procmail is a harsh mistress.
(Related question: Why the '& 0xf' in the calculation of newirq in
quirk_via_irqpic?)
-andy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Sep 07 2001 - 21:00:43 EST