Hi,
Today I installed SuSE 7.2 (with kernel 2.4.4-4GB included with SuSE).
After the installation I decided to compile my own kernel like I always
do.
First I tried 2.4.9, afterwards 2.4.9-ac7 and at last 2.4.6, all with
the same result: Either the boot process simply stops somewhere in the
middle or there is a kernel panic. So I took 2.4.9-ac7 and removed
everything "Experimental" from it, including IDE-DMA, AGP etc. This time
I could boot to the prompt but when X came up, it crashed and triggered
a kernel Ooops. This time I could save the dmesg. BTW, 2.2.19 also works
properly.
My System is a AMD Thunderbird with a Via82C686 Chipset, 256MB Ram
(tested with memtestx86, no errors), a DPT PM1554U2 controller (but same
behavior without compiling this into the kernel) and Reiserfs on my root
partition (hda2), so no exotic hardware.
The kernel Oops looks like this:
------------------- snip -----------------
is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len
2059, item_location 0, free_space(entry_count) 57024
vs-5150: search_by_key: invalid format found in block 8980. Fsck?
is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len
2059, item_location 0, free_space(entry_count) 57024
vs-5150: search_by_key: invalid format found in block 8980. Fsck?
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
VM: refill_inactive, wrong page on list.
Unable to handle kernel paging request at virtual address 0d696910
printing eip:
c0125f0f
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c0125f0f>]
EFLAGS: 00010282
eax: c025a360 ebx: c105a004 ecx: c1476000 edx: 0d696910
esi: c105a020 edi: 00000011 ebp: 00000000 esp: c1477fc8
ds: 0018 es: 0018 ss: 0018
Process kswapd (pid: 4, stackpage=c1477000)
Stack: c1476000 c01e2f27 c1476239 0008e000 c01e2f27 c012632d 00000006
00010f00
cffe7fb8 00000000 c01054c8 00000000 00000078 c0219fd4
Call Trace: [<c012632d>] [<c01054c8>]
Code: 89 02 ff 0d 58 a3 25 c0 e9 45 01 00 00 8d 74 26 00 8b 43 40
----------------------- end ---------------------------
I simply attach the whole "dmesg" to this mail - perhaps this makes
things clearer...
Does anyone have a clue what to do? Should I try 2.4.4?
Please contact me if you need any further information.
Best Regards,
Hermann
-- ,_, (O,O) "There is more to life than increasing its speed." ( ) -- Gandhi -"-"--------------------------------------------------------------
Linux version 2.4.9-ac7 (root@capella) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Sep 5 18:24:05 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/bzImage-2.4.9 Initializing CPU#0 Detected 1195.247 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2385.51 BogoMIPS Memory: 255800k/262080k available (885k kernel code, 5892k reserved, 232k data, 176k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Applying VIA southbridge workaround. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169941kB/56647kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later hda: IBM-DJNA-371350, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 26520480 sectors (13578 MB) w/1966KiB Cache, CHS=1650/255/63 Partition check: hda: hda1 hda2 SCSI subsystem driver Revision: 1.00 Loading Adaptec I2O RAID: Version 2.4 Build 5 Detecting Adaptec I2O RAID controllers... PCI: Found IRQ 5 for device 00:09.1 IRQ routing conflict for 00:07.5, have irq 11, want irq 5 Adaptec I2O RAID controller 0 at d0800000 size=100000 irq=5 dpti: If you have a lot of devices this could take a few minutes. dpti0: Reading the hardware resource table. TID 008 Vendor: SYMBIOS Device: SYM53C895 Rev: 00000001 TID 517 Vendor: DPT Device: RAID-1 Rev: 2047 scsi0 : Vendor: Adaptec Model: PM1554U2 FW:2047 Vendor: DPT Model: RAID-1 Rev: 2047 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 2, lun 0 SCSI device sda: 8923904 512-byte hdwr sectors (4569 MB) sda: sda1 sda2 sda3 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 03:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 176k freed Adding Swap: 530104k swap-space (priority 42) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: Found IRQ 15 for device 00:0c.0 PCI: Sharing IRQ 15 with 00:08.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0c.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xec00. Vers LK1.1.16 memory.c:84: bad pmd c1432244. memory.c:84: bad pmd c14321bc. memory.c:84: bad pmd c1576d38. memory.c:84: bad pmd 0000001e. memory.c:84: bad pmd 00000005. memory.c:84: bad pmd 0000004c. memory.c:84: bad pmd c1432260. memory.c:84: bad pmd c14321d8. memory.c:84: bad pmd 00000002. memory.c:84: bad pmd c1432020. memory.c:84: bad pmd c1430000. memory.c:84: bad pmd cff42000. is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [7727 7869 0x0 SD] is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [7727 7882 0x0 SD] is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [7727 7918 0x0 SD] is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [7727 7919 0x0 SD] is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [7727 7728 0x0 SD] is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [7727 7731 0x0 SD] is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? is_leaf: item location seems wrong: *OLD*[7727 7728 0x0 SD], item_len 2059, item_location 0, free_space(entry_count) 57024 vs-5150: search_by_key: invalid format found in block 8980. Fsck? Installing knfsd (copyright (C) 1996 okir@monad.swb.de). VM: refill_inactive, wrong page on list. Unable to handle kernel paging request at virtual address 0d696910 printing eip: c0125f0f *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[<c0125f0f>] EFLAGS: 00010282 eax: c025a360 ebx: c105a004 ecx: c1476000 edx: 0d696910 esi: c105a020 edi: 00000011 ebp: 00000000 esp: c1477fc8 ds: 0018 es: 0018 ss: 0018 Process kswapd (pid: 4, stackpage=c1477000) Stack: c1476000 c01e2f27 c1476239 0008e000 c01e2f27 c012632d 00000006 00010f00 cffe7fb8 00000000 c01054c8 00000000 00000078 c0219fd4 Call Trace: [<c012632d>] [<c01054c8>]
Code: 89 02 ff 0d 58 a3 25 c0 e9 45 01 00 00 8d 74 26 00 8b 43 40
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Sep 07 2001 - 21:00:31 EST