On Monday 06 August 2001 22:30:12, Nicholas Knight wrote:
> You mention the problem is being unable to change the media, I was
> unaware this was even possible with the current 3c509 driver, and most
> people do it on 3c509's and other PNP cards of this sort (such as NE2000
> clones) by using a DOS boot diskette and the DOS utilities provided by
> the manufacturer.
That's what I did. I've set it to "auto mode" and it works with RJ45 cable.
But I can't verify if "full duplex" worked right. So I changed it under Win
to "10baseT" for which the 3Com utilities say "full duplex" enabled.
Now I get this for my ADSL NIC.
My first NIC (Ethernet Pro 100+) is for the LAN.
eth1: 3c5x9 at 0x220, 10baseT port, address 00 a0 24 87 4a a6, IRQ 5.
3c509.c:1.18 12Mar2001 becker@scyld.com
http://www.scyld.com/network/3c509.html
eth1: Setting Rx mode to 1 addresses.
eth1: Setting Rx mode to 2 addresses.
eth1: Setting Rx mode to 3 addresses.
But I am not smarter 'cause there is no full duplex mode mentioned in the
logs.
Thanks,
Dieter
BTW Is DMA (channel 6 for example) possible with this hardware/driver?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 07 2001 - 21:00:41 EST