Hi guys,
Isn't SMP P6 kernel supposed to boot fine on a P4? Btw, booting with
"nosmp" works but booting with "noapic" hangs just the same.
Here is where it hangs:
>
> ---------------------System Info------------------------------------
>
> Intel Pentium 4 processor: 1.3 GHz
> Level 2 Cache: 256 KB Integrated
>
> System Memory 256 MB ECC RDRAM
> AGP Aperture 128 MB
> CPU Information::
> CPU speed Normal
> Bus Speed 100 Mhz
> Processor ID F0A
> Clock Speed 1.30 Ghz
> Cache Size 256KB
>
>
>
> --------------------Messages on the screen---------------------------
>
>
> CPU0: Intel(R) Pentium(R) 4 CPU 1300 Mhz stepping 0a
> per-CPU timeslice cutoff: 731.49 usecs
> weird, boot CPU (#0) not listed by the BIOS
> Getting VERSION: f000acde
> Getting VERSION: f0ffac21
> leaving PIC mode, enabling symmetric IO mode.
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> CPU present map: 1
> Before bogomips.
> Error: only one processor found.
> Boot done.
> ENABLING IO-APIC IRQs
> Synchronizing Arb IDs.
> ..TIMER: vector=31 pin1=2 pin2=0
> activating NMI Watchdog...done
> CPU#0 NMI appears to be stuck
> testing the IO APIC.............
> ..........................done
> calibrating APIC timer...
> .....CPU clock speed is 1285.2614 Mhz
> ....host bus clock speed is 0.0000 Mhz
> cpu:0, clocks:0, slice:0
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 31 2001 - 21:00:49 EST