[PATCH]: ide-floppy & devfs

From: Martin Wilck (Martin.Wilck@fujitsu-siemens.com)
Date: Fri Jul 27 2001 - 14:34:33 EST

Hi,

The following patch causes ide-floppy to register a disc
even if no cartridge is in the drive, so that devfs creates
nodes for the drive for later use. Without this patch,
if devfs is used, no device node is ever created, and
ide-floppy must be rmmoded and reloaded if a floppy is inserted
into a drive that was empty at boot time.

The reason is that grok_partitions() returns immediately if the
device passed has a size parameter of 0, which was the case
in ide-floppy with no cartrifge in the drive.

The patch is against 2.4.7.

It is somewhat a hack, perhaps somebody else finds a more elegant
way to do it. But it makes sense that an empty drive
does not return a capacity of 0, but the capacity of a standard media
cartridge.

Martin 

-- 
Martin Wilck     <Martin.Wilck@fujitsu-siemens.com>
FSC EP PS DS1, Paderborn      Tel. +49 5251 8 15113

--- 2.4.7a/drivers/ide/ide-probe.c	Sun Mar 18 18:25:02 2001
+++ 2.4.7/drivers/ide/ide-probe.c	Fri Jul 27 23:01:49 2001
@@ -122,6 +122,7 @@
 						printk("cdrom or floppy?, assuming ");
 					if (drive->media != ide_cdrom) {
 						printk ("FLOPPY");
+						drive->removable = 1;
 						break;
 					}
 				}
--- 2.4.7a/drivers/ide/ide-floppy.c	Wed Jul 25 20:20:44 2001
+++ 2.4.7/drivers/ide/ide-floppy.c	Fri Jul 27 23:00:38 2001
@@ -1279,7 +1279,15 @@
 					printk (KERN_NOTICE "%s: warning: non 512 bytes block size not fully supported\n", drive->name);
 				rc = 0;
 			}
-		}
+		} else if (!i && descriptor->dc == CAPACITY_NO_CARTRIDGE
+			   && drive->removable && !(length % 512)) {
+		        /*
+			   Set these two so that idefloppy_capacity returns a positive value,
+			   needed for devfs registration.
+			 */
+			floppy->blocks = blocks;
+			floppy->bs_factor = length / 512;
+		};
 #if IDEFLOPPY_DEBUG_INFO
 		if (!i) printk (KERN_INFO "Descriptor 0 Code: %d\n", descriptor->dc);
 		printk (KERN_INFO "Descriptor %d: %dkB, %d blocks, %d sector size\n", i, blocks * length / 1024, blocks, length);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Tue Jul 31 2001 - 21:00:34 EST