Thanks a lot for the reply. Now it's working fine. But I have another
problem.
If I set all these rules with bandwith parameter set to 100Mbit, then
results are near to expected results. But when I set bandwidth parameter
to 10Mbit with all other parameters unchanged it doesn't give correct
results.
The results I got for both cases are following.
BANDWITH RATE WEIGHT Throughput (as seen using
netperf)
10 Mbit 4 Mbit 400 Kbit 6.38 Mbps
10 Mbit 5 Mbit 500 Kbit 7.31 Mbps
100 Mbit 4 Mbit 400 Kbit 4.08 Mbps
100 Mbit 5 Mbit 500 Kbit 5.11 Mbps.
Can anyone explain what could be the reason for this? Why I don't get
correct results when I set bandwidth to 10 Mbit?
Thanks in advance.
regards,
Deepika
On Thu, 26 Jul 2001, [windows-1250] Lubomír Bulej wrote:
> Hi,
>
> > I am defining only one class at m/c router on interface eth1. The tc
> > rules set up for doing so are following.
> >
> > tc qdisc add dev eth1 root handle 1: cbq bandwidth 10Mbit cell 8 avpkt
> > 1000 mpu 64
> >
> > tc class add dev eth1 parent 1:0 classud 1:1 cbq bandwidth 10Mbit rate
> > 1kbit allot 1514 cell 8 weigth 100bit prio 5 maxburst 20 avpkt 1000
>
> Add "bounded" at the end of the command... Otherwise the class borrows
> bandwidth from its parent.
>
>
> Regards,
> Lubomir
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 31 2001 - 21:00:30 EST