Linus,
Please consider the below patch for inclusion into 2.4.7 adding support
for Dynamic Disks.
Alan,
If you would like to include it in the -ac series, I have verified it
applies fine to 2.4.7-ac1 (Configure.help part applies only with an offset
but it is fine).
Detailed description of patch:
- Patch adds support for Dynamic Disks which are introduced by Windows
2000 and are also used by Windows XP, thus allowing people with dual-boot
configurations access to their Windows dynamic disk partitions from Linux.
- The patch does not modify existing kernel code, except for plugging into
the partition recognition code path just before msdos partitions are
recognized (this needs to happen as dynamic disks also have a normal msdos
partition table in order to prevent other OS of thinking the disk is blank
and hence msdos.c would handle them if we don't get in before it does).
- Dynamic disk, aka LDM, support is of course a compile time option, the
patch adds the necessary configuration/documentation entries into
fs/partitions/Configure.in and Documentation/Configure.help.
- The patch works such that if it determines a device is a dynamic disk,
for example say it was hdb, it would create hdb1 representing the LDM
database, which can be used in the future by yet to be written ldm user
space utilities (the ldm equivalents of fdisk and volume managers). Then
it creates for each data partition found in the LDM database, a
corresponding device starting at hdb5, then hdb6, etc. So the layout
created is much like the extended msdos partitions:
hdb: hdb1 < hdb5 hdb6 etc...>
Note that we just do it for all partitions in order. We perform no special
treatment when partitions are part of raid arrays, etc, we just create
each member partition as one device (hdb5, etc), handling raid arrays is
up to future extensions / user space tools / the users to deal with.
- The code is as bullet proof as possible with respect to checking that we
don't dereference memory outside valid boundaries by doing heavy
consistency checking of the LDM database contents and the memory offsets
that are deduced by reading it. Basically, unless we have missed
something, the ldm code cannot cause the kernel to crash under any
circumstances. It will always cleanup and exit with -1 should an error
occur.
- There is also a compile time option that can be enabled when configuring
the kernel which will result in debug messages being output via printk
with KERN_DEBUG log level. When debugging messages are not compiled in,
they are optimized away completely an don't exist in the created binary
object.
- Needless to say the ldm code has been tested and we haven't had any bug
reports / complaints about it so we decided it was time to submit it for
inclusion into the kernel.
- FlatCap (Richard Russon <ntfs@flatcap.org>) has done the reverse
engineering and ldm coding work, so all kudos to him. He also wrote some
documentation on how dynamic disks work and in particular on the layout of
the LDM database which can be found on Sourceforge:
http://linux-ntfs.sf.net/ldm/
I only helped cleaning up the code to comply with kernel coding standards
and worked on making sure we do every check we could think of to make the
code behave under all circumstances.
Best regards,
Anton Altaparmakov
FlatCap (Richard Russon)
------ linux-2.4.7-ldm.diff patch follows ------
diff -urN linux-2.4.7-vanilla/Documentation/Configure.help linux/Documentation/Configure.help
--- linux-2.4.7-vanilla/Documentation/Configure.help Fri Jul 20 01:48:15 2001
+++ linux/Documentation/Configure.help Wed Jul 25 19:22:27 2001
@@ -12471,6 +12471,33 @@
Say Y here if you would like to use hard disks under Linux which
were partitioned on a Macintosh.
+Windows' Logical Disk Manager (Dynamic Disk) support (EXPERIMENTAL)
+CONFIG_LDM_PARTITION
+ Say Y here if you would like to use hard disks under Linux which
+ were partitioned using Windows 2000's or XP's Logical Disk Manager.
+ They are also known as "Dynamic Disks".
+
+ Windows 2000 introduced the concept of Dynamic Disks to get around
+ the limitations of the PC's partitioning scheme. The Logical Disk
+ Manager allows the user to repartion a disk and create spanned,
+ mirrored, striped or RAID volumes, all without the need for
+ rebooting.
+
+ Normal partitions are now called Basic Disks under Windows 2000 and XP.
+
+ Technical documentation to accompany this driver is available from:
+ <http://linux-ntfs.sf.net/ldm>
+
+ If unsure, say N.
+
+Windows' LDM extra logging
+CONFIG_LDM_DEBUG
+ Say Y here if you would like LDM to log verbosely. This could be
+ helpful if the driver doesn't work as expected and you'd like to
+ report a bug.
+
+ If unsure, say N.
+
PC BIOS (MSDOS partition tables) support
CONFIG_MSDOS_PARTITION
Say Y here if you would like to use hard disks under Linux which
diff -urN linux-2.4.7-vanilla/fs/partitions/Config.in linux/fs/partitions/Config.in
--- linux-2.4.7-vanilla/fs/partitions/Config.in Mon Jul 16 18:44:20 2001
+++ linux/fs/partitions/Config.in Wed Jul 25 18:23:10 2001
@@ -25,6 +25,10 @@
bool ' Solaris (x86) partition table support' CONFIG_SOLARIS_X86_PARTITION
bool ' Unixware slices support' CONFIG_UNIXWARE_DISKLABEL
fi
+ dep_bool ' Windows Logical Disk Manager (Dynamic Disk) support' CONFIG_LDM_PARTITION $CONFIG_EXPERIMENTAL
+ if [ "$CONFIG_LDM_PARTITION" = "y" ]; then
+ bool ' Windows LDM extra logging' CONFIG_LDM_DEBUG
+ fi
bool ' SGI partition support' CONFIG_SGI_PARTITION
bool ' Ultrix partition table support' CONFIG_ULTRIX_PARTITION
bool ' Sun partition tables support' CONFIG_SUN_PARTITION
diff -urN linux-2.4.7-vanilla/fs/partitions/Makefile linux/fs/partitions/Makefile
--- linux-2.4.7-vanilla/fs/partitions/Makefile Sat Apr 14 04:26:07 2001
+++ linux/fs/partitions/Makefile Wed Jul 25 18:24:06 2001
@@ -17,6 +17,7 @@
obj-$(CONFIG_AMIGA_PARTITION) += amiga.o
obj-$(CONFIG_ATARI_PARTITION) += atari.o
obj-$(CONFIG_MAC_PARTITION) += mac.o
+obj-$(CONFIG_LDM_PARTITION) += ldm.o
obj-$(CONFIG_MSDOS_PARTITION) += msdos.o
obj-$(CONFIG_OSF_PARTITION) += osf.o
obj-$(CONFIG_SGI_PARTITION) += sgi.o
diff -urN linux-2.4.7-vanilla/fs/partitions/check.c linux/fs/partitions/check.c
--- linux-2.4.7-vanilla/fs/partitions/check.c Wed Jul 11 22:55:41 2001
+++ linux/fs/partitions/check.c Wed Jul 25 18:25:37 2001
@@ -25,6 +25,7 @@
#include "acorn.h"
#include "amiga.h"
#include "atari.h"
+#include "ldm.h"
#include "mac.h"
#include "msdos.h"
#include "osf.h"
@@ -41,6 +42,9 @@
static int (*check_part[])(struct gendisk *hd, kdev_t dev, unsigned long first_sect, int first_minor) = {
#ifdef CONFIG_ACORN_PARTITION
acorn_partition,
+#endif
+#ifdef CONFIG_LDM_PARTITION
+ ldm_partition, /* this must come before msdos */
#endif
#ifdef CONFIG_MSDOS_PARTITION
msdos_partition,
diff -urN linux-2.4.7-vanilla/fs/partitions/ldm.c linux/fs/partitions/ldm.c
--- linux-2.4.7-vanilla/fs/partitions/ldm.c Thu Jan 1 01:00:00 1970
+++ linux/fs/partitions/ldm.c Thu Jul 26 01:39:35 2001
@@ -0,0 +1,980 @@
+/*
+ * $Id: ldm.c,v 1.25 2001/07/25 23:32:02 flatcap Exp $
+ *
+ * ldm - Part of the Linux-NTFS project.
+ *
+ * Copyright (C) 2001 Richard Russon <ntfs@flatcap.org>
+ * Copyright (C) 2001 Anton Altaparmakov <antona@users.sf.net>
+ *
+ * Documentation is available at http://linux-ntfs.sf.net/ldm
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program (in the main directory of the Linux-NTFS source
+ * in the file COPYING); if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <asm/types.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <linux/genhd.h>
+#include <linux/blkdev.h>
+#include <linux/slab.h>
+#include "check.h"
+#include "ldm.h"
+#include "msdos.h"
+
+#if 0 /* Fool kernel-doc since it doesn't do macros yet. */
+/**
+ * ldm_debug - output an error message if debugging was enabled at compile time
+ * @f: a printf format string containing the message
+ * @...: the variables to substitute into @f
+ *
+ * ldm_debug() writes a DEBUG level message to the syslog but only if the
+ * driver was compiled with debug enabled. Otherwise, the call turns into a NOP.
+ */
+static void ldm_debug(const char *f, ...);
+#endif
+#ifdef CONFIG_LDM_DEBUG
+#define ldm_debug(f, a...) \
+ { \
+ printk(LDM_DEBUG " DEBUG (%s, %d): %s: ", \
+ __FILE__, __LINE__, __FUNCTION__); \
+ printk(f, ##a); \
+ }
+#else /* !CONFIG_LDM_DEBUG */
+#define ldm_debug(f, a...) do {} while (0)
+#endif /* !CONFIG_LDM_DEBUG */
+
+/* Necessary forward declarations. */
+static int create_partition(struct gendisk *, int, int, int);
+static int parse_privhead(const u8 *, struct privhead *);
+static u64 get_vnum(const u8 *, int *);
+static int get_vstr(const u8 *, u8 *, const int);
+
+/**
+ * parse_vblk_part - parse a LDM database vblk partition record
+ * @buffer: vblk partition record loaded from the LDM database
+ * @buf_size: size of @buffer in bytes
+ * @vb: in memory vblk structure to return parsed information in
+ *
+ * This parses the LDM database vblk record of type VBLK_PART, i.e. a partition
+ * record, supplied in @buffer and sets up the in memory vblk structure @vb
+ * with the obtained information.
+ *
+ * Return 1 on success and -1 on error, in which case @vb is undefined.
+ */
+static int parse_vblk_part(const u8 *buffer, const int buf_size,
+ struct vblk *vb)
+{
+ int err, rel_objid, rel_name, rel_size, rel_parent;
+
+ if (0x34 >= buf_size)
+ return -1;
+ /* Calculate relative offsets. */
+ rel_objid = 1 + buffer[0x18];
+ if (0x18 + rel_objid >= buf_size)
+ return -1;
+ rel_name = 1 + buffer[0x18 + rel_objid] + rel_objid;
+ if (0x34 + rel_name >= buf_size)
+ return -1;
+ rel_size = 1 + buffer[0x34 + rel_name] + rel_name;
+ if (0x34 + rel_size >= buf_size)
+ return -1;
+ rel_parent = 1 + buffer[0x34 + rel_size] + rel_size;
+ if (0x34 + rel_parent >= buf_size)
+ return -1;
+ /* Setup @vb. */
+ vb->vblk_type = VBLK_PART;
+ vb->obj_id = get_vnum(buffer + 0x18, &err);
+ if (err || 0x34 + rel_parent + buffer[0x34 + rel_parent] >= buf_size)
+ return -1;
+ vb->disk_id = get_vnum(buffer + 0x34 + rel_parent, &err);
+ if (err || 0x24 + rel_name + 8 > buf_size)
+ return -1;
+ vb->start_sector = BE64(buffer + 0x24 + rel_name);
+ if (0x34 + rel_name + buffer[0x34 + rel_name] >= buf_size)
+ return -1;
+ vb->num_sectors = get_vnum(buffer + 0x34 + rel_name, &err);
+ if (err || 0x18 + rel_objid + buffer[0x18 + rel_objid] >= buf_size)
+ return -1;
+ err = get_vstr(buffer + 0x18 + rel_objid, vb->name, sizeof(vb->name));
+ if (err == -1)
+ return err;
+ ldm_debug("Parsed Partition VBLK successfully.\n");
+ return 1;
+}
+
+/**
+ * parse_vblk - parse a LDM database vblk record
+ * @buffer: vblk record loaded from the LDM database
+ * @buf_size: size of @buffer in bytes
+ * @vb: in memory vblk structure to return parsed information in
+ *
+ * This parses the LDM database vblk record supplied in @buffer and sets up
+ * the in memory vblk structure @vb with the obtained information.
+ *
+ * Return 1 on success, 0 if successful but record not in use, and -1 on error.
+ * If the return value is 0 or -1, @vb is undefined.
+ *
+ * NOTE: Currently the only record type we handle is VBLK_PART, i.e. records
+ * describing a partition. For all others, we just set @vb->vblk_type to 0 and
+ * return success. This of course means that if @vb->vblk_type is zero, all
+ * other fields in @vb are undefined.
+ */
+static int parse_vblk(const u8 *buffer, const int buf_size, struct vblk *vb)
+{
+ int err = 1;
+
+ if (buf_size < 0x14)
+ return -1;
+ if (MAGIC_VBLK != BE32(buffer)) {
+ printk(LDM_CRIT "Cannot find VBLK, database may be corrupt.\n");
+ return -1;
+ }
+ if (BE16(buffer + 0x0E) == 0) /* Record is not in use. */
+ return 0;
+ /* FIXME: What about extended VBLKs? */
+ switch (buffer[0x13]) {
+ case VBLK_PART:
+ err = parse_vblk_part(buffer, buf_size, vb);
+ break;
+ default:
+ vb->vblk_type = 0;
+ }
+ if (err != -1)
+ ldm_debug("Parsed VBLK successfully.\n");
+ return err;
+}
+
+/**
+ * create_data_partitions - create the data partition devices
+ * @hd: gendisk structure in which to create the data partitions
+ * @first_sector: first sector within the disk device
+ * @first_part_minor: first minor number of data partition devices
+ * @dev: partition device holding the LDM database
+ * @vm: in memory vmdb structure of @dev
+ * @ph: in memory privhead structure of the disk device
+ * @dk: in memory ldmdisk structure of the disk device
+ *
+ * The database contains ALL the partitions for ALL the disks, so we need to
+ * filter out this specific disk. Using the disk's object id, we can find all
+ * the partitions in the database that belong to this disk.
+ *
+ * For each found partition, we create a corresponding partition device starting
+ * with minor number @first_part_minor.
+ *
+ * Return 1 on success and -1 on error.
+ */
+static int create_data_partitions(struct gendisk *hd,
+ const unsigned long first_sector, int first_part_minor,
+ const kdev_t dev, const struct vmdb *vm,
+ const struct privhead *ph, const struct ldmdisk *dk)
+{
+ struct buffer_head *bh;
+ struct vblk *vb;
+ int vblk;
+ int vsize; /* VBLK size. */
+ int perbuf; /* VBLKs per buffer. */
+ int buffer, lastbuf, lastofs, err;
+
+ vb = (struct vblk*)kmalloc(sizeof(struct vblk), GFP_KERNEL);
+ if (!vb)
+ goto no_mem;
+ vsize = vm->vblk_size;
+ if (vsize < 1 || vsize > LDM_BLOCKSIZE)
+ goto err_out;
+ perbuf = LDM_BLOCKSIZE / vsize;
+ if (perbuf < 1 || LDM_BLOCKSIZE % vsize)
+ goto err_out;
+ /* 512 == VMDB size */
+ lastbuf = (vm->last_vblk_seq - (512 / vsize)) / perbuf;
+ lastofs = (vm->last_vblk_seq - (512 / vsize)) % perbuf;
+ if (lastofs)
+ lastbuf++;
+ if (OFF_VBLK * LDM_BLOCKSIZE + vm->last_vblk_seq * vsize >
+ ph->config_size * 512)
+ goto err_out;
+ printk(" <");
+ for (buffer = 0; buffer < lastbuf; buffer++) {
+ if (!(bh = bread(dev, buffer + OFF_VBLK, LDM_BLOCKSIZE)))
+ goto read_err;
+ for (vblk = 0; vblk < perbuf; vblk++) {
+ u8 *block;
+
+ if (lastofs && buffer == lastbuf - 1 && vblk >= lastofs)
+ break;
+ block = bh->b_data + vsize * vblk;
+ if (block + vsize > (u8*)bh->b_data + LDM_BLOCKSIZE)
+ goto brelse_out;
+ if (parse_vblk(block, LDM_BLOCKSIZE, vb) != 1)
+ continue;
+ if (vb->vblk_type != VBLK_PART)
+ continue;
+ if (dk->obj_id != vb->disk_id)
+ continue;
+ if (create_partition(hd, first_part_minor,
+ first_sector + vb->start_sector +
+ ph->logical_disk_start,
+ vb->num_sectors) == 1)
+ first_part_minor++;
+ }
+ brelse(bh);
+ }
+ printk(" >\n");
+ err = 1;
+out:
+ kfree(vb);
+ return err;
+brelse_out:
+ brelse(bh);
+ goto err_out;
+no_mem:
+ printk(LDM_CRIT "Not enough memory to allocate required buffers.\n");
+ goto err_out;
+read_err:
+ printk(LDM_CRIT "Disk read failed in create_partitions.\n");
+err_out:
+ err = -1;
+ goto out;
+}
+
+/**
+ * get_vnum - convert a variable-width, big endian number, to cpu u64 one
+ * @block: pointer to the variable-width number to convert
+ * @err: address of an integer into which to return the error code.
+ *
+ * This converts a variable-width, big endian number into a 64-bit, CPU format
+ * number and returns the result with err set to 0. If an error occurs return 0
+ * with err set to -1.
+ *
+ * The first byte of a variable-width number is the size of the number in bytes.
+ */
+static u64 get_vnum(const u8 *block, int *err)
+{
+ u64 tmp = 0ULL;
+ u8 length = *block++;
+
+ if (length && length <= 8) {
+ while (length--)
+ tmp = (tmp << 8) | *block++;
+ *err = 0;
+ } else {
+ printk(LDM_ERR "Illegal length in get_vnum(): %d.\n", length);
+ *err = 1;
+ }
+ return tmp;
+}
+
+/**
+ * get_vstr - convert a counted, non-null-terminated ASCII string to C-style one
+ * @block: string to convert
+ * @buffer: output buffer
+ * @buflen: size of output buffer
+ *
+ * This converts @block, a counted, non-null-terminated ASCII string, into a
+ * C-style, null-terminated, ASCII string and returns this in @buffer. The
+ * maximum number of characters converted is given by @buflen.
+ *
+ * The first bytes of a counted string stores the length of the string in bytes.
+ *
+ * Return the number of characters written to @buffer, not including the
+ * terminating null character, on success, and -1 on error, in which case
+ * @buffer is not defined.
+ */
+static int get_vstr(const u8 *block, u8 *buffer, const int buflen)
+{
+ int length = block[0];
+
+ if (length < 1)
+ return -1;
+ if (length >= buflen) {
+ printk(LDM_ERR "String too long for buffer in get_vstr(): "
+ "(%d/%d). Truncating.\n", length, buflen);
+ length = buflen - 1;
+ }
+ memcpy(buffer, block + 1, length);
+ buffer[length] = (u8)'\0';
+ return length;
+}
+
+/**
+ * get_disk_objid - obtain the object id for the device we are working on
+ * @dev: partition device holding the LDM database
+ * @vm: in memory vmdb structure of the LDM database
+ * @ph: in memory privhead structure of the device we are working on
+ * @dk: in memory ldmdisk structure to return information into
+ *
+ * This obtains the object id for the device we are working on as defined by
+ * the private header @ph. The obtained object id, together with the disk's
+ * GUID from @ph are returned in the ldmdisk structure pointed to by @dk.
+ *
+ * A Disk has two Ids. The main one is a GUID in string format. The second,
+ * used internally for cross-referencing, is a small, sequentially allocated,
+ * number. The PRIVHEAD, just after the partition table, tells us the disk's
+ * GUID. To find the disk's object id, we have to look through the database.
+ *
+ * Return 1 on success and -1 on error, in which case @dk is undefined.
+ */
+static int get_disk_objid(const kdev_t dev, const struct vmdb *vm,
+ const struct privhead *ph, struct ldmdisk *dk)
+{
+ struct buffer_head *bh;
+ u8 *disk_id;
+ int vblk;
+ int vsize; /* VBLK size. */
+ int perbuf; /* VBLKs per buffer. */
+ int buffer, lastbuf, lastofs, err;
+
+ disk_id = (u8*)kmalloc(DISK_ID_SIZE, GFP_KERNEL);
+ if (!disk_id)
+ goto no_mem;
+ vsize = vm->vblk_size;
+ if (vsize < 1 || vsize > LDM_BLOCKSIZE)
+ goto err_out;
+ perbuf = LDM_BLOCKSIZE / vsize;
+ if (perbuf < 1 || LDM_BLOCKSIZE % vsize)
+ goto err_out;
+ /* 512 == VMDB size */
+ lastbuf = (vm->last_vblk_seq - (512 / vsize)) / perbuf;
+ lastofs = (vm->last_vblk_seq - (512 / vsize)) % perbuf;
+ if (lastofs)
+ lastbuf++;
+ if (OFF_VBLK * LDM_BLOCKSIZE + vm->last_vblk_seq * vsize >
+ ph->config_size * 512)
+ goto err_out;
+ for (buffer = 0; buffer < lastbuf; buffer++) {
+ if (!(bh = bread(dev, buffer + OFF_VBLK, LDM_BLOCKSIZE)))
+ goto read_err;
+ for (vblk = 0; vblk < perbuf; vblk++) {
+ int rel_objid, rel_name, delta;
+ u8 *block;
+
+ if (lastofs && buffer == lastbuf - 1 && vblk >= lastofs)
+ break;
+ block = bh->b_data + vblk * vsize;
+ delta = vblk * vsize + 0x18;
+ if (delta >= LDM_BLOCKSIZE)
+ goto brelse_out;
+ if (block[0x13] != VBLK_DISK)
+ continue;
+ /* Calculate relative offsets. */
+ rel_objid = 1 + block[0x18];
+ if (delta + rel_objid >= LDM_BLOCKSIZE)
+ goto brelse_out;
+ rel_name = 1 + block[0x18 + rel_objid] + rel_objid;
+ if (delta + rel_name >= LDM_BLOCKSIZE ||
+ delta + rel_name + block[0x18 + rel_name] >=
+ LDM_BLOCKSIZE)
+ goto brelse_out;
+ err = get_vstr(block + 0x18 + rel_name, disk_id,
+ DISK_ID_SIZE);
+ if (err == -1)
+ goto brelse_out;
+ if (!strncmp(disk_id, ph->disk_id, DISK_ID_SIZE)) {
+ dk->obj_id = get_vnum(block + 0x18, &err);
+ brelse(bh);
+ if (err)
+ goto out;
+ strncpy(dk->disk_id, ph->disk_id,
+ sizeof(dk->disk_id));
+ dk->disk_id[sizeof(dk->disk_id) - 1] = (u8)'\0';
+ err = 1;
+ goto out;
+ }
+ }
+ brelse(bh);
+ }
+ err = -1;
+out:
+ kfree(disk_id);
+ return err;
+brelse_out:
+ brelse(bh);
+ goto err_out;
+no_mem:
+ printk(LDM_CRIT "Not enough memory to allocate required buffers.\n");
+ goto err_out;
+read_err:
+ printk(LDM_CRIT "Disk read failed in get_disk_objid.\n");
+err_out:
+ err = -1;
+ goto out;
+}
+
+/**
+ * parse_vmdb - parse the LDM database vmdb structure
+ * @buffer: LDM database vmdb structure loaded from the device
+ * @vm: in memory vmdb structure to return parsed information in
+ *
+ * This parses the LDM database vmdb structure supplied in @buffer and sets up
+ * the in memory vmdb structure @vm with the obtained information.
+ *
+ * Return 1 on success and -1 on error, in which case @vm is undefined.
+ *
+ * NOTE: The *_start, *_size and *_seq values returned in @vm have not been
+ * checked for validity, so make sure to check them when using them.
+ */
+static int parse_vmdb(const u8 *buffer, struct vmdb *vm)
+{
+ if (MAGIC_VMDB != BE32(buffer)) {
+ printk(LDM_CRIT "Cannot find VMDB, database may be corrupt.\n");
+ return -1;
+ }
+ vm->ver_major = BE16(buffer + 0x12);
+ vm->ver_minor = BE16(buffer + 0x14);
+ if ((vm->ver_major != 4) || (vm->ver_minor != 10)) {
+ printk(LDM_ERR "Expected VMDB version %d.%d, got %d.%d. "
+ "Aborting.\n", 4, 10, vm->ver_major,
+ vm->ver_minor);
+ return -1;
+ }
+ vm->vblk_size = BE32(buffer + 0x08);
+ vm->vblk_offset = BE32(buffer + 0x0C);
+ vm->last_vblk_seq = BE32(buffer + 0x04);
+
+ ldm_debug("Parsed VMDB successfully.\n");
+ return 1;
+}
+
+/**
+ * validate_vmdb - validate the vmdb
+ * @dev: partition device holding the LDM database
+ * @vm: in memory vmdb in which to return information
+ *
+ * Find the vmdb of the LDM database stored on @dev and return the parsed
+ * information into @vm.
+ *
+ * Return 1 on success and -1 on error, in which case @vm is undefined.
+ */
+static int validate_vmdb(const kdev_t dev, struct vmdb *vm)
+{
+ struct buffer_head *bh;
+ int ret;
+
+ if (!(bh = bread(dev, OFF_VMDB, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT "Disk read failed in validate_vmdb.\n");
+ return -1;
+ }
+ ret = parse_vmdb(bh->b_data + 0x200, vm);
+ brelse(bh);
+ return ret;
+}
+
+/**
+ * compare_tocblocks - compare two tables of contents
+ * @toc1: first toc
+ * @toc2: second toc
+ *
+ * This compares the two tables of contents @toc1 and @toc2.
+ *
+ * Return 1 if @toc1 and @toc2 are equal and -1 otherwise.
+ */
+static int compare_tocblocks(const struct tocblock *toc1,
+ const struct tocblock *toc2)
+{
+ if ((toc1->bitmap1_start == toc2->bitmap1_start) &&
+ (toc1->bitmap1_size == toc2->bitmap1_size) &&
+ (toc1->bitmap2_start == toc2->bitmap2_start) &&
+ (toc1->bitmap2_size == toc2->bitmap2_size) &&
+ !strncmp(toc1->bitmap1_name, toc2->bitmap1_name,
+ sizeof(toc1->bitmap1_name)) &&
+ !strncmp(toc1->bitmap2_name, toc2->bitmap2_name,
+ sizeof(toc1->bitmap2_name)))
+ return 1;
+ return -1;
+}
+
+/**
+ * parse_tocblock - parse the LDM database table of contents structure
+ * @buffer: LDM database toc structure loaded from the device
+ * @toc: in memory toc structure to return parsed information in
+ *
+ * This parses the LDM database table of contents structure supplied in @buffer
+ * and sets up the in memory table of contents structure @toc with the obtained
+ * information.
+ *
+ * Return 1 on success and -1 on error, in which case @toc is undefined.
+ *
+ * FIXME: The *_start and *_size values returned in @toc are not been checked
+ * for validity but as we don't use the actual values for anything other than
+ * comparing between the toc and its backups, the values are not important.
+ */
+static int parse_tocblock(const u8 *buffer, struct tocblock *toc)
+{
+ if (MAGIC_TOCBLOCK != BE64(buffer)) {
+ printk(LDM_CRIT "Cannot find TOCBLOCK, database may be "
+ "corrupt.\n");
+ return -1;
+ }
+ strncpy(toc->bitmap1_name, buffer + 0x24, sizeof(toc->bitmap1_name));
+ toc->bitmap1_name[sizeof(toc->bitmap1_name) - 1] = (u8)'\0';
+ toc->bitmap1_start = BE64(buffer + 0x2E);
+ toc->bitmap1_size = BE64(buffer + 0x36);
+ /*toc->bitmap1_flags = BE64(buffer + 0x3E);*/
+ if (strncmp(toc->bitmap1_name, TOC_BITMAP1,
+ sizeof(toc->bitmap1_name)) != 0) {
+ printk(LDM_CRIT "TOCBLOCK's first bitmap should be %s, but is "
+ "%s.\n", TOC_BITMAP1, toc->bitmap1_name);
+ return -1;
+ }
+ strncpy(toc->bitmap2_name, buffer + 0x46, sizeof(toc->bitmap2_name));
+ toc->bitmap2_name[sizeof(toc->bitmap2_name) - 1] = (u8)'\0';
+ toc->bitmap2_start = BE64(buffer + 0x50);
+ toc->bitmap2_size = BE64(buffer + 0x58);
+ /*toc->bitmap2_flags = BE64(buffer + 0x60);*/
+ if (strncmp(toc->bitmap2_name, TOC_BITMAP2,
+ sizeof(toc->bitmap2_name)) != 0) {
+ printk(LDM_CRIT "TOCBLOCK's second bitmap should be %s, but is "
+ "%s.\n", TOC_BITMAP2, toc->bitmap2_name);
+ return -1;
+ }
+ ldm_debug("Parsed TOCBLOCK successfully.\n");
+ return 1;
+}
+
+/**
+ * validate_tocblocks - validate the table of contents and its backups
+ * @dev: partition device holding the LDM database
+ * @toc1: in memory table of contents in which to return information
+ *
+ * Find and compare the four tables of contents of the LDM database stored on
+ * @dev and return the parsed information into @toc1.
+ *
+ * Return 1 on success and -1 on error, in which case @toc1 is undefined.
+ */
+static int validate_tocblocks(const kdev_t devdb, struct tocblock *toc1)
+{
+ struct buffer_head *bh;
+ struct tocblock *toc2 = NULL, *toc3 = NULL, *toc4 = NULL;
+ int err;
+
+ toc2 = (struct tocblock*)kmalloc(sizeof(*toc2), GFP_KERNEL);
+ if (!toc2)
+ goto no_mem;
+ toc3 = (struct tocblock*)kmalloc(sizeof(*toc3), GFP_KERNEL);
+ if (!toc3)
+ goto no_mem;
+ toc4 = (struct tocblock*)kmalloc(sizeof(*toc4), GFP_KERNEL);
+ if (!toc4)
+ goto no_mem;
+ /* Read and parse first toc. */
+ if (!(bh = bread(devdb, OFF_TOCBLOCK1, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT "Disk read 1 failed in validate_tocblocks.\n");
+ goto err_out;
+ }
+ err = parse_tocblock(bh->b_data + 0x0200, toc1);
+ brelse(bh);
+ if (err != 1)
+ goto out;
+ /* Read and parse second toc. */
+ if (!(bh = bread(devdb, OFF_TOCBLOCK2, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT "Disk read 2 failed in validate_tocblocks.\n");
+ goto err_out;
+ }
+ err = parse_tocblock(bh->b_data, toc2);
+ brelse(bh);
+ if (err != 1)
+ goto out;
+ /* Read and parse third toc. */
+ if (!(bh = bread(devdb, OFF_TOCBLOCK3, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT "Disk read 3 failed in validate_tocblocks.\n");
+ goto err_out;
+ }
+ err = parse_tocblock(bh->b_data + 0x0200, toc3);
+ brelse(bh);
+ if (err != 1)
+ goto out;
+ /* Read and parse fourth toc. */
+ if (!(bh = bread(devdb, OFF_TOCBLOCK4, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT "Disk read 4 failed in validate_tocblocks.\n");
+ goto err_out;
+ }
+ err = parse_tocblock(bh->b_data, toc4);
+ brelse(bh);
+ if (err != 1)
+ goto out;
+ /* Compare all tocs. */
+ err = compare_tocblocks(toc1, toc2);
+ if (err != 1) {
+ printk(LDM_CRIT "First and second TOCBLOCKs don't match.\n");
+ goto out;
+ }
+ err = compare_tocblocks(toc3, toc4);
+ if (err != 1) {
+ printk(LDM_CRIT "Third and fourth TOCBLOCKs don't match.\n");
+ goto out;
+ }
+ err = compare_tocblocks(toc1, toc3);
+ if (err != 1)
+ printk(LDM_CRIT "First and third TOCBLOCKs don't match.\n");
+ else
+ ldm_debug("Validated TOCBLOCKs successfully.\n");
+out:
+ kfree(toc2);
+ kfree(toc3);
+ kfree(toc4);
+ return err;
+no_mem:
+ printk(LDM_CRIT "Not enough memory to allocate required buffers.\n");
+err_out:
+ err = -1;
+ goto out;
+}
+
+/**
+ * compare_privheads - compare two privheads
+ * @ph1: first privhead
+ * @ph2: second privhead
+ *
+ * This compares the two privheads @ph1 and @ph2.
+ *
+ * Return 1 if @ph1 and @ph2 are equal and -1 otherwise.
+ */
+static int compare_privheads(const struct privhead *ph1,
+ const struct privhead *ph2)
+{
+ if ((ph1->ver_major == ph2->ver_major) &&
+ (ph1->ver_minor == ph2->ver_minor) &&
+ (ph1->logical_disk_start == ph2->logical_disk_start) &&
+ (ph1->logical_disk_size == ph2->logical_disk_size) &&
+ (ph1->config_start == ph2->config_start) &&
+ (ph1->config_size == ph2->config_size) &&
+ !strncmp(ph1->disk_id, ph2->disk_id, sizeof(ph1->disk_id)))
+ return 1;
+ return -1;
+}
+
+/**
+ * validate_privheads - compare the privhead backups to the first one
+ * @dev: partition device holding the LDM database
+ * @ph1: first privhead which we have already validated before
+ *
+ * We already have one privhead from the beginning of the disk.
+ * Now we compare the two other copies for safety.
+ *
+ * Return 1 on succes and -1 on error.
+ */
+static int validate_privheads(const kdev_t dev, const struct privhead *ph1)
+{
+ struct buffer_head *bh;
+ struct privhead *ph2 = NULL, *ph3 = NULL;
+ int err;
+
+ ph2 = (struct privhead*)kmalloc(sizeof(*ph2), GFP_KERNEL);
+ if (!ph2)
+ goto no_mem;
+ ph3 = (struct privhead*)kmalloc(sizeof(*ph3), GFP_KERNEL);
+ if (!ph3)
+ goto no_mem;
+ if (!(bh = bread(dev, OFF_PRIVHEAD2, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT "Disk read 1 failed in validate_privheads.\n");
+ goto err_out;
+ }
+ err = parse_privhead(bh->b_data, ph2);
+ brelse(bh);
+ if (err != 1)
+ goto out;
+ if (!(bh = bread(dev, OFF_PRIVHEAD3, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT "Disk read 2 failed in validate_privheads.\n");
+ goto err_out;
+ }
+ err = parse_privhead(bh->b_data + 0x0200, ph3);
+ brelse(bh);
+ if (err != 1)
+ goto out;
+ err = compare_privheads(ph1, ph2);
+ if (err != 1) {
+ printk(LDM_CRIT "First and second PRIVHEADs don't match.\n");
+ goto out;
+ }
+ err = compare_privheads(ph1, ph3);
+ if (err != 1)
+ printk(LDM_CRIT "First and third PRIVHEADs don't match.\n");
+ else
+ /* We _could_ have checked more. */
+ ldm_debug("Validated PRIVHEADs successfully.\n");
+out:
+ kfree(ph2);
+ kfree(ph3);
+ return err;
+no_mem:
+ printk(LDM_CRIT "Not enough memory to allocate required buffers.\n");
+err_out:
+ err = -1;
+ goto out;
+}
+
+/**
+ * create_partition - validate input and create a kernel partition device
+ * @hd: gendisk structure in which to create partition
+ * @minor: minor number for device to create
+ * @start: starting offset of the partition into the parent device
+ * @size: size of the partition
+ *
+ * This validates the range, then puts an entry into the kernel's partition
+ * table.
+ *
+ * @start and @size are numbers of sectors.
+ *
+ * Return 1 on succes and -1 on error.
+ */
+static int create_partition(struct gendisk *hd, const int minor,
+ const int start, const int size)
+{
+ int disk_minor;
+
+ if (!hd->part)
+ return -1;
+ /*
+ * Get the minor number of the parent device so we can check we don't
+ * go beyond the end of the device.
+ */
+ disk_minor = (minor >> hd->minor_shift) << hd->minor_shift;
+ if ((start < 1) || ((start + size) > hd->part[disk_minor].nr_sects)) {
+ printk(LDM_CRIT "LDM Partition exceeds physical disk. "
+ "Aborting.\n");
+ return -1;
+ }
+ add_gd_partition(hd, minor, start, size);
+ ldm_debug("Created partition successfully.\n");
+ return 1;
+}
+
+/**
+ * parse_privhead - parse the LDM database PRIVHEAD structure
+ * @buffer: LDM database privhead structure loaded from the device
+ * @ph: in memory privhead structure to return parsed information in
+ *
+ * This parses the LDM database PRIVHEAD structure supplied in @buffer and
+ * sets up the in memory privhead structure @ph with the obtained information.
+ *
+ * Return 1 on succes and -1 on error, in which case @ph is undefined.
+ */
+static int parse_privhead(const u8 *buffer, struct privhead *ph)
+{
+ if (MAGIC_PRIVHEAD != BE64(buffer)) {
+ printk(LDM_ERR "Cannot find PRIVHEAD structure. LDM database "
+ "is corrupt. Aborting.\n");
+ return -1;
+ }
+ ph->ver_major = BE16(buffer + 0x000C);
+ ph->ver_minor = BE16(buffer + 0x000E);
+ if ((ph->ver_major != 2) || (ph->ver_minor != 11)) {
+ printk(LDM_ERR "Expected PRIVHEAD version %d.%d, got %d.%d. "
+ "Aborting.\n", 2, 11, ph->ver_major,
+ ph->ver_minor);
+ return -1;
+ }
+ ph->config_start = BE64(buffer + 0x012B);
+ ph->config_size = BE64(buffer + 0x0133);
+ if (ph->config_size != LDM_DB_SIZE) { /* 1 MiB in sectors. */
+ printk(LDM_ERR "Database should be %u bytes, claims to be %Lu "
+ "bytes. Aborting.\n", LDM_DB_SIZE,
+ ph->config_size);
+ return -1;
+ }
+ ph->logical_disk_start = BE64(buffer + 0x011B);
+ ph->logical_disk_size = BE64(buffer + 0x0123);
+ if (!ph->logical_disk_size ||
+ ph->logical_disk_start + ph->logical_disk_size > ph->config_start)
+ return -1;
+
+ memcpy(ph->disk_id, buffer + 0x0030, sizeof(ph->disk_id));
+
+ ldm_debug("Parsed PRIVHEAD successfully.\n");
+ return 1;
+}
+
+/**
+ * create_db_partition - create a dedicated partition for our database
+ * @hd: gendisk structure in which to create partition
+ * @dev: device of which to create partition
+ * @ph: @dev's LDM database private header
+ *
+ * Find the primary private header, locate the LDM database, then create a
+ * partition to wrap it.
+ *
+ * Return 1 on succes, 0 if device is not a dynamic disk and -1 on error.
+ */
+static int create_db_partition(struct gendisk *hd, const kdev_t dev,
+ const unsigned long first_sector, const int first_part_minor,
+ struct privhead *ph)
+{
+ struct buffer_head *bh;
+ int err;
+
+ if (!(bh = bread(dev, OFF_PRIVHEAD1, LDM_BLOCKSIZE))) {
+ printk(LDM_CRIT __FUNCTION__ "(): Device read failed.\n");
+ return -1;
+ }
+ if (BE64(bh->b_data) != MAGIC_PRIVHEAD) {
+ ldm_debug("Cannot find PRIVHEAD structure. Not a dynamic disk "
+ "or corrupt LDM database.\n");
+ return 0;
+ }
+ err = parse_privhead(bh->b_data, ph);
+ if (err == 1)
+ err = create_partition(hd, first_part_minor, first_sector +
+ ph->config_start, ph->config_size);
+ brelse(bh);
+ return err;
+}
+
+/**
+ * validate_patition_table - check whether @dev is a dynamic disk
+ * @dev: device to test
+ *
+ * Check whether @dev is a dynamic disk by looking for an MS-DOS-style partition
+ * table with one or more entries of type 0x42 (the former Secure File System
+ * (Landis) partition type, now recycled by Microsoft for dynamic disks) in it.
+ * If this succeeds we assume we have a dynamic disk, and not otherwise.
+ *
+ * Return 1 if @dev is a dynamic disk, 0 if not and -1 on error.
+ */
+static int validate_partition_table(const kdev_t dev)
+{
+ struct buffer_head *bh;
+ struct partition *p;
+ int i, nr_sfs;
+
+ if (!(bh = bread(dev, 0, LDM_BLOCKSIZE))) {
+ if (warn_no_part)
+ printk(LDM_ERR "Unable to read partition table.\n");
+ return -1;
+ }
+ if (*(u16*)(bh->b_data + 0x01FE) != cpu_to_le16(MSDOS_LABEL_MAGIC)) {
+ ldm_debug("No MS-DOS partition found.\n");
+ goto no_msdos_partition;
+ }
+ nr_sfs = 0;
+ p = (struct partition*)(bh->b_data + 0x01BE);
+ for (i = 0; i < 4; i++) {
+ if (!SYS_IND(p+i) || SYS_IND(p+i) == WIN2K_EXTENDED_PARTITION)
+ continue;
+ if (SYS_IND(p+i) == WIN2K_DYNAMIC_PARTITION) {
+ nr_sfs++;
+ continue;
+ }
+ goto not_dynamic_disk;
+ }
+ if (!nr_sfs)
+ goto not_dynamic_disk;
+ ldm_debug("Parsed partition table successfully.\n");
+ brelse(bh);
+ return 1;
+not_dynamic_disk:
+ ldm_debug("Found basic MS-DOS partition, not a dynamic disk.\n");
+no_msdos_partition:
+ brelse(bh);
+ return 0;
+}
+
+/**
+ * ldm_partition - find out whether a device is a dynamic disk and handle it
+ * @hd: gendisk structure in which to return the handled disk
+ * @dev: device we need to look at
+ * @first_sector: first sector within the device
+ * @first_part_minor: first minor number of partitions for the device
+ *
+ * Description:
+ *
+ * This determines whether the device @dev is a dynamic disk and if so creates
+ * the partitions necessary in the gendisk structure pointed to by @hd.
+ *
+ * We create a dummy device 1, which contains the LDM database, we skip
+ * devices 2-4 and then create each partition described by the LDM database
+ * in sequence as devices 5 and following. For example, if the device is hda,
+ * we would have: hda1: LDM database, hda2-4: nothing, hda5-following: the
+ * actual data containing partitions.
+ *
+ * Return values:
+ *
+ * 1 if @dev is a dynamic disk and we handled it,
+ * 0 if @dev is not a dynamic disk,
+ * -1 if an error occured.
+ */
+int ldm_partition(struct gendisk *hd, kdev_t dev, unsigned long first_sector,
+ int first_part_minor)
+{
+ kdev_t devdb;
+ struct privhead *ph = NULL;
+ struct tocblock *toc = NULL;
+ struct vmdb *vm = NULL;
+ struct ldmdisk *dk = NULL;
+ int err;
+
+ if (!hd)
+ return 0;
+ err = (int)get_ptable_blocksize(dev);
+ if (err != LDM_BLOCKSIZE) { /* 1024 bytes */
+ ldm_debug("Expected a blocksize of %d bytes, got %d instead.\n",
+ LDM_BLOCKSIZE, get_ptable_blocksize(dev));
+ return 0;
+ }
+ err = get_hardsect_size(dev);
+ if (err != 512) {
+ ldm_debug("Expected a sector size of %d bytes, got %d "
+ "instead.\n", 512, get_hardsect_size(dev));
+ return 0;
+ }
+ /* Check the partition table. */
+ err = validate_partition_table(dev);
+ if (err != 1)
+ return err;
+ if (!(ph = (struct privhead*)kmalloc(sizeof(*ph), GFP_KERNEL)))
+ goto no_mem;
+ /* Create the LDM database device. */
+ err = create_db_partition(hd, dev, first_sector, first_part_minor, ph);
+ if (err != 1)
+ goto out;
+ /* For convenience, work with the LDM database device from now on. */
+ devdb = MKDEV(MAJOR(dev), first_part_minor);
+ /* Check the backup privheads. */
+ err = validate_privheads(devdb, ph);
+ if (err != 1)
+ goto out;
+ /* Check the table of contents and its backups. */
+ if (!(toc = (struct tocblock*)kmalloc(sizeof(*toc), GFP_KERNEL)))
+ goto no_mem;
+ err = validate_tocblocks(devdb, toc);
+ if (err != 1)
+ goto out;
+ /* Check the vmdb. */
+ if (!(vm = (struct vmdb*)kmalloc(sizeof(*vm), GFP_KERNEL)))
+ goto no_mem;
+ err = validate_vmdb(devdb, vm);
+ if (err != 1)
+ goto out;
+ /* Find the object id for @dev in the LDM database. */
+ if (!(dk = (struct ldmdisk*)kmalloc(sizeof(*dk), GFP_KERNEL)))
+ goto no_mem;
+ err = get_disk_objid(devdb, vm, ph, dk);
+ if (err != 1)
+ goto out;
+ /* Finally, create the data partition devices. */
+ err = create_data_partitions(hd, first_sector, first_part_minor +
+ LDM_FIRST_PART_OFFSET, devdb, vm, ph, dk);
+ if (err == 1)
+ ldm_debug("Parsed LDM database successfully.\n");
+out:
+ kfree(ph);
+ kfree(toc);
+ kfree(vm);
+ kfree(dk);
+ return err;
+no_mem:
+ printk(LDM_CRIT "Not enough memory to allocate required buffers.\n");
+ err = -1;
+ goto out;
+}
+
diff -urN linux-2.4.7-vanilla/fs/partitions/ldm.h linux/fs/partitions/ldm.h
--- linux-2.4.7-vanilla/fs/partitions/ldm.h Thu Jan 1 01:00:00 1970
+++ linux/fs/partitions/ldm.h Wed Jul 25 18:36:48 2001
@@ -0,0 +1,162 @@
+#ifndef _FS_PT_LDM_H_
+#define _FS_PT_LDM_H_
+/*
+ * $Id: ldm.h,v 1.13 2001/07/23 19:49:49 antona Exp $
+ *
+ * ldm - Part of the Linux-NTFS project.
+ *
+ * Copyright (C) 2001 Richard Russon <ntfs@flatcap.org>
+ * Copyright (C) 2001 Anton Altaparmakov <antona@users.sf.net>
+ *
+ * Documentation is available at http://linux-ntfs.sf.net/ldm
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program (in the main directory of the Linux-NTFS source
+ * in the file COPYING); if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <asm/types.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <linux/genhd.h>
+
+/* Borrowed from kernel.h. */
+#define LDM_PREFIX "LDM: " /* Prefix our error messages with this. */
+#define LDM_CRIT KERN_CRIT LDM_PREFIX /* critical conditions */
+#define LDM_ERR KERN_ERR LDM_PREFIX /* error conditions */
+#define LDM_DEBUG KERN_DEBUG LDM_PREFIX /* debug-level messages */
+
+/* Magic numbers in CPU format. */
+#define MAGIC_VMDB 0x564D4442 /* VMDB */
+#define MAGIC_VBLK 0x56424C4B /* VBLK */
+#define MAGIC_PRIVHEAD 0x5052495648454144 /* PRIVHEAD */
+#define MAGIC_TOCBLOCK 0x544F43424C4F434B /* TOCBLOCK */
+
+/* The defined vblk types. */
+#define VBLK_COMP 0x32 /* Component */
+#define VBLK_PART 0x33 /* Partition */
+#define VBLK_DISK 0x34 /* Disk */
+#define VBLK_DGRP 0x45 /* Disk Group */
+#define VBLK_VOLU 0x51 /* Volume */
+
+/* Other constants. */
+#define LDM_BLOCKSIZE 1024 /* Size of block in bytes. */
+#define LDM_DB_SIZE 2048 /* Size in sectors (= 1MiB). */
+#define LDM_FIRST_PART_OFFSET 4 /* Add this to first_part_minor
+ to get to the first data
+ partition device minor. */
+
+#define OFF_PRIVHEAD1 3 /* Offset of the first privhead
+ relative to the start of the
+ device in units of
+ LDM_BLOCKSIZE. */
+
+/* Offsets to structures within the LDM Database in units of LDM_BLOCKSIZE. */
+#define OFF_PRIVHEAD2 928 /* Backup private headers. */
+#define OFF_PRIVHEAD3 1023
+
+#define OFF_TOCBLOCK1 0 /* Tables of contents. */
+#define OFF_TOCBLOCK2 1
+#define OFF_TOCBLOCK3 1022
+#define OFF_TOCBLOCK4 1023
+
+#define OFF_VMDB 8 /* List of partitions. */
+#define OFF_VBLK 9
+
+#define WIN2K_DYNAMIC_PARTITION 0x42 /* Formerly SFS (Landis). */
+#define WIN2K_EXTENDED_PARTITION 0x05 /* A standard extended
+ partition. */
+
+#define TOC_BITMAP1 "config" /* Names of the two defined */
+#define TOC_BITMAP2 "log" /* bitmaps in the TOCBLOCK. */
+
+/* Borrowed from msdos.c */
+#define SYS_IND(p) (get_unaligned(&p->sys_ind))
+#define NR_SECTS(p) ({ __typeof__(p->nr_sects) __a = \
+ get_unaligned(&p->nr_sects); \
+ le32_to_cpu(__a); \
+ })
+#define START_SECT(p) ({ __typeof__(p->start_sect) __a = \
+ get_unaligned(&p->start_sect); \
+ le32_to_cpu(__a); \
+ })
+
+/* Most numbers we deal with are big-endian and won't be aligned. */
+#define BE16(x) ((u16)be16_to_cpu(get_unaligned((u16*)(x))))
+#define BE32(x) ((u32)be32_to_cpu(get_unaligned((u32*)(x))))
+#define BE64(x) ((u64)be64_to_cpu(get_unaligned((u64*)(x))))
+
+/* Borrowed from msdos.c. */
+#define SYS_IND(p) (get_unaligned(&(p)->sys_ind))
+#define NR_SECTS(p) ({ __typeof__((p)->nr_sects) __a = \
+ get_unaligned(&(p)->nr_sects); \
+ le32_to_cpu(__a); \
+ })
+
+#define START_SECT(p) ({ __typeof__((p)->start_sect) __a = \
+ get_unaligned(&(p)->start_sect);\
+ le32_to_cpu(__a); \
+ })
+
+/* In memory LDM database structures. */
+
+#define DISK_ID_SIZE 64 /* Size in bytes. */
+
+struct ldmdisk {
+ u64 obj_id;
+ u8 disk_id[DISK_ID_SIZE];
+};
+
+struct privhead { /* Offsets and sizes are in sectors. */
+ u16 ver_major;
+ u16 ver_minor;
+ u64 logical_disk_start;
+ u64 logical_disk_size;
+ u64 config_start;
+ u64 config_size;
+ u8 disk_id[DISK_ID_SIZE];
+};
+
+struct tocblock { /* We have exactly two bitmaps. */
+ u8 bitmap1_name[16];
+ u64 bitmap1_start;
+ u64 bitmap1_size;
+ /*u64 bitmap1_flags;*/
+ u8 bitmap2_name[16];
+ u64 bitmap2_start;
+ u64 bitmap2_size;
+ /*u64 bitmap2_flags;*/
+};
+
+struct vmdb {
+ u16 ver_major;
+ u16 ver_minor;
+ u32 vblk_size;
+ u32 vblk_offset;
+ u32 last_vblk_seq;
+};
+
+struct vblk {
+ u8 name[64];
+ u8 vblk_type;
+ u64 obj_id;
+ u64 disk_id;
+ u64 start_sector;
+ u64 num_sectors;
+};
+
+int ldm_partition(struct gendisk *hd, kdev_t dev, unsigned long first_sector,
+ int first_part_minor);
+
+#endif /* _FS_PT_LDM_H_ */
+
-- Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @) Linux NTFS maintainer / WWW: http://linux-ntfs.sf.net/ ICQ: 8561279 / WWW: http://www-stu.christs.cam.ac.uk/~aia21/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jul 31 2001 - 21:00:30 EST