0100,0100,0100After attempting different configurations for the past 3 hours, I am at a loss. I have attempted to successfully load the 3C59x driver with kernel 2.4.6-pre5 and pre3 with no luck. As soon as the module loads, I can switch consoles, but can type nothing into any of them. I can hit the Num Lock, which will turn on and off the light, same with Caps Lock. I can hit the return key in the terminal where the insmod command was given, and it will scroll the screen, nothing more. I tried loading the module with debug=7, per the vortex.txt file, but nothing is logged anywhere. I am at a loss as to what is the problem is here. Any help is appreciated. Attached is my .config file and output from dmesg. I can try to provide any more info that might help. I will also attache output from lspci, although, the TV card has been removed, as it was sharing an IRQ with the NIC, so I wanted to eliminate any possibility that this might be part of the problem. Glenn C. Hofmann