Is this a known bug in tmscsim.o (2.0f, included with 2.2.19):
I have the following devices (cat /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST15230N Rev: 0638
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-3601TA Rev: 0725
Type: CD-ROM ANSI SCSI revision: 02
cat /proc/scsi/tmscsim/0
Tekram DC390/AM53C974 PCI SCSI Host Adapter, Driver Version 2.0f 2000-12-20
SCSI Host Nr 0, AM53C974 Adapter Nr 0
IOPortBase 0xff00, IRQ 10
MaxID 7, MaxLUN 8, AdapterID 7, SelTimeout 250 ms, DelayReset 1 s
TagMaxNum 16, Status 0x00, ACBFlag 0x00, GlitchEater 24 ns
Statistics: Cmnds 257518, Cmnds not sent directly 25959, Out of SRB conds 0
Lost arbitrations 6240, Sel. connected 0, Connected: No
Nr of attached devices: 2, Nr of DCBs: 2
Map of attached LUNs: 01 00 00 00 01 00 00 00
Idx ID LUN Prty Sync DsCn SndS TagQ NegoPeriod SyncSpeed SyncOffs MaxCmd
00 00 00 Yes Yes Yes Yes Yes 100 ns 10.0 M 15 16
01 04 00 Yes Yes Yes Yes No 236 ns 4.0 M 15 01
Commands in Queues: Query: 0:
Often (but not always), on boot, I get Sync as "No" for the hard drive (Idx
0). Doing "echo 'inquiry 0' > 0" always fixes the problem after boot but for
some reason, the driver doesn't (always) pick up on this at boot time. It
doesn't seem to matter if it's a boot up from power-off or soft reboot.
The drive, Seagate Hawk, support synchronous operation and sync negotiation.
- John
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Jun 15 2001 - 21:00:21 EST