Linux version 2.2.19-smp (root@debian) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 SMP Fri Jun 1 22:41:04 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0009f000 @ 00000000 (usable) BIOS-e820: 0fef0000 @ 00100000 (usable) Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Processor #1 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Detected 801842 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1599.07 BogoMIPS Memory: 257804k/262080k available (920k kernel code, 420k reserved, 2860k data, 76k init) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized 256K L2 cache (8 way) CPU: L2 Cache: 256K Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. 256K L2 cache (8 way) CPU: L2 Cache: 256K per-CPU timeslice cutoff: 50.04 usecs. CPU0: Intel Pentium III (Coppermine) stepping 03 calibrating APIC timer ... ..... CPU clock speed is 801.8353 MHz. ..... system bus clock speed is 133.6390 MHz. Booting processor 1 eip 2000 Calibrating delay loop... 1602.35 BogoMIPS Intel machine check reporting enabled on CPU#1. 256K L2 cache (8 way) CPU: L2 Cache: 256K OK. CPU1: Intel Pentium III (Coppermine) stepping 03 Total of 2 processors activated (3201.43 BogoMIPS). enabling symmetric IO mode... ...done. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-15, 2-20, 2-21, 2-22, 2-23 not connected. number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 0 0 0 0 0 1 1 59 02 0FF 0F 0 0 0 0 0 1 1 51 03 000 00 0 0 0 0 0 1 1 61 04 000 00 0 0 0 0 0 1 1 69 05 000 00 1 0 0 0 0 0 0 00 06 000 00 0 0 0 0 0 1 1 71 07 000 00 0 0 0 0 0 1 1 79 08 000 00 0 0 0 0 0 1 1 81 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 0 0 0 0 0 1 1 89 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 0 0 0 0 0 1 1 91 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 0 0 0 0 0 1 1 99 0f 000 00 1 0 0 0 0 0 0 00 10 0FF 0F 1 1 0 1 0 1 1 A1 11 0FF 0F 1 1 0 1 0 1 1 A9 12 0FF 0F 1 1 0 1 0 1 1 B1 13 0FF 0F 1 1 0 1 0 1 1 B9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ10 -> 10 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. checking TSC synchronization across CPUs: passed. mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb2d0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I12,P0) -> 18 PCI->APIC IRQ transform: (B0,I15,P0) -> 17 PCI->APIC IRQ transform: (B0,I16,P0) -> 18 PCI->APIC IRQ transform: (B0,I17,P0) -> 19 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Starting kswapd v 1.5 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio hda: FUJITSU MPG3102AH, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: FUJITSU MPG3102AH, 9541MB w/2048kB Cache, CHS=1216/255/63 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13) apm: disabled - APM is not SMP safe. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 76k freed NET4: Unix domain sockets 1.0 for Linux NET4.0. Adding Swap: 498004k swap-space (priority -1) rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html eth0: RealTek RTL8139 Fast Ethernet at 0xe800, IRQ 18, 00:48:54:53:a2:fa. ncr53c8xx: at PCI bus 0, device 17, function 0 ncr53c8xx: 53c810 detected ncr53c810-0: rev 0x2 on pci bus 0 device 17 function 0 irq 19 ncr53c810-0: ID 7, Fast-10, Parity Checking scsi0 : ncr53c8xx-3.4.1-20000726 scsi : 1 host. Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 ncr53c810-0-<2,*>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 8) sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.11 Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A