tulip driver broken in 2.4.4?

From: Ronny Haryanto (ronny-linux@haryan.to)
Date: Tue May 01 2001 - 11:05:12 EST


Just tried 2.4.4 yesterday and found that my eth1 was dead after 5 minutes.
The log says:

Apr 30 10:30:59 fluke kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr 30 10:30:59 fluke kernel: eth1: Transmit timed out, status fc664010, CSR12 00000000, resetting...
Apr 30 10:31:07 fluke kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr 30 10:31:07 fluke kernel: eth1: Transmit timed out, status fc664010, CSR12 00000000, resetting...
... and so on repeatedly ...

I had to ifdown-ifup cycle to re-enable it but it's dead again after 5
minutes with the same problem. The card is LinkSys LNE100TX v4.1. It is
currently working fine with 2.2.18. If there's any other info that is needed
please let me know.

Ronny
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon May 07 2001 - 21:00:10 EST