Re: 2.4.3 - Module problems?

From: Jeff Garzik (jgarzik@mandrakesoft.com)
Date: Sun Apr 15 2001 - 12:53:37 EST


Francois Cami wrote:
>
> hi Matthew and everyone
>
> I use a 3COM Etherlink III ISA and a 3C905C PCI in my firewall
> box (i440BX mobo). (distro is slackware 7.1, kernels are either
> 2.2.19 or 2.4.3, modutils 2.3.1 (slackware 7.1 default) ).
>
> The 3C905C was never a problem (and i guess your R8029 isn't either),
> however to make the 3C509 ISA work, I had to disable PnP in the
> card's firmware, with 3COM tools : see
>
> http://www.3com.com/products/html/prodlist.html?family=570&cat=20&pathtype=download&tab=cat&selcat=Network%20Interface%20Cards%20%26%20Adapters
>
> to download the DOS tools to configure your card without PnP, i.e.
> manually
> assigning an IRQ and address to it.
>
> You'll have to declare to your BIOS that this particular IRQ is taken
> by a non-PNP ISA card too.

You can also use the Linux program
ftp://www.scyld.com/pub/diag/3c5x9setup.c

-- 
Jeff Garzik       | "Give a man a fish, and he eats for a day. Teach a
Building 1024     |  man to fish, and a US Navy submarine will make sure
MandrakeSoft      |  he's never hungry again." -- Chris Neufeld
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Apr 15 2001 - 21:00:24 EST